upsstats.html(5) Network UPS Tools (NUT) upsstats.html(5)NAMEupsstats.html - HTML template for Network UPS Tools
upsstats
DESCRIPTION
This file is used by upsstats.cgi(8) to generate status
pages. Certain commands are recognized, and will be
replaced with various status elements on the fly.
FORMATTING
All commands must be alone on a line, and start and end
with @. A line that has any extra characters before or
after the @ will be passed through unchanged.
BLOCK CONTROL
Some commands begin blocks - sections of the template that
will be included, excluded, or repeated depending on cer-
tain parameters.
@FOREACHUPS@
Starts a block that will be repeated for each MONI-
TOR directive in the hosts.conf(5). This is how
you can generate pages that monitor all of your
systems simultaneously.
@ENDFOR@
Ends a FOREACHUPS block.
@IFSUPP var@
Starts a block that will only be printed if the
variable var is supported by the current UPS. This
is generally used to suppress "not supported" mes-
sages by avoiding the label and variable call
entirely.
@ENDIF@
Ends an IFSUPP block.
IFSUPP blocks may be contained within a FOREACHUPS block.
Nesting and other combinations are not supported.
OTHER COMMANDS
@AMBTEMP@
Insert the ambient temperature in the current tem-
perature scale.
@DATE format@
Insert the current date and time. The format
string is passed to strftime, so almost anything is
possible. See strftime(3) for possible values.
@DEGREES@
Insert the entity for degrees (°) and either C
or F depending on the current temperature scale.
@HOST@ Insert the designation of the host being monitored,
like myups@localhost.
@HOSTDESC@
Insert the host's description from hosts.conf(5).
@HOSTLINK@
Insert a link to upsstats.cgi with the "host" vari-
able set to the current UPS. This is only useful
within a FOREACHUPS block.
@IMG varname [extra]@
Insert an IMG SRC to upsimage.cgi(8) for one of
four possible status variables:
BATTPCT - Battery charge - a percentage
LOADPCT - UPS load - percentage
OUTVOLT - Outgoing voltage (from the UPS)
UTILITY - Incoming utility voltage
extra is where you can put additional definitions.
Right now the valid definitions are colors for var-
ious parts of the bars drawn by upsimage.cgi. Pos-
sible color names are:
back_col - background color
scale_num_col - scale number color
summary_col - summary color (number at the
bottom)
ok_zone_maj_col - major scale color for
the normal ("ok") zone
ok_zone_min_col - minor scale color for
the normal ("ok") zone
neutral_zone_maj_col - major scale color for
the neutral zone
neutral_zone_min_col - minor scale color for
the neutral zone
warn_zone_maj_col - major scale color for the
warning zone
warn_zone_min_col - minor scale color for the
warning zone
bar_col - the color of the bar in the middle
All colors are hex triplets - 0xff0000 is red,
0x00ff00 is green, and 0x0000ff is blue.
Examples:
@IMG BATTPCT@
@IMG BATTPCT back_col=0xff00ff bar_col=0xaab-
bcc@
@IMG UTILITY ok_zone_maj_col=0x123456@
@REFRESH@
Insert the META header magic for refreshing the
page if that variable has been set by the browser.
This needs to be in the HEAD section of the page.
@STATUS@
Expand the abbreviations in the STATUS variable -
OL becomes "On line", OB becomes "On battery", and
so on.
@STATUSCOLOR@
Insert red, green, or yellow color triplets depend-
ing on the severity of the current UPS status.
Normal operations are green, warnings like voltage
trim/boost or "off" are yellow, and other events
like being on battery or having a low battery are
red.
@VAR varname@
Insert the current value of the status variable
varname on the host being monitored, or "Not sup-
ported".
@TEMPC@
Use the Celsius scale for temperature data
(default).
@TEMPF@
Use the Fahrenheit scale for temperature data.
@UPSTEMP@
Insert the UPS temperature in the current scale.
@UTILITYCOLOR@
Insert either #FF0000 (red) or #00FF00 (green)
depending on the incoming utility voltage. By
default this will return green, unless the utility
is outside the bounds defined by lowxfer and high-
xfer. Those voltages are a function of your
driver, and do not exist on all of them.
@VERSION@
Insert the version number of the software.
OTHER TEMPLATESupsstats.cgi(8) will also open a file called upsstats-
single.html if you call it with "host=" set in the URL.
That file uses the same rules and techniques documented
here.
SEE ALSOupsstats.cgi(8), upsimage.cgi(8)
Internet resources:
The NUT (Network UPS Tools) home page:
http://www.exploits.org/nut/
NUT mailing list archives and information:
http://lists.exploits.org/
Mon Sep 16 2002 upsstats.html(5)