tabs(1) User Commands tabs(1)NAMEtabs - set tabs on a terminal
SYNOPSIStabs [-n | −−file
[[-code] | -a | -a2 | -c | -c2 | -c3 | -f | -p | -s | -u]]
q!! [+m [n]] [-T type]
tabs [-T type] [+ m [n]] n1 [, n2 ,...]
DESCRIPTION
The tabs utility sets the tab stops on the user's terminal according to
a tab specification, after clearing any previous settings. The user's
terminal must have remotely settable hardware tabs.
OPTIONS
The following options are supported. If a given flag occurs more than
once, the last value given takes effect:
-T type tabs needs to know the type of terminal in order to set
tabs and margins. type is a name listed in term(5). If no
-T flag is supplied, tabs uses the value of the environment
variable TERM. If the value of TERM is NULL or TERM is not
defined in the environment (see environ(5)), tabs uses
ansi+tabs as the terminal type to provide a sequence that
will work for many terminals.
+m[n] The margin argument may be used for some terminals. It
causes all tabs to be moved over n columns by making column
n+1 the left margin. If +m is given without a value of n,
the value assumed is 10. For a TermiNet, the first value in
the tab list should be 1, or the margin will move even fur‐
ther to the right. The normal (leftmost) margin on most
terminals is obtained by +m0. The margin for most terminals
is reset only when the +m flag is given explicitly.
Tab Specification
Four types of tab specification are accepted. They are described
below: canned, repetitive (-n), arbitrary (n1,n2,...), and file
(-file).
If no tab specification is given, the default value is −8, that is,
UNIX system ``standard'' tabs. The lowest column number is 1. Note:
For tabs, column 1 always refers to the leftmost column on a terminal,
even one whose column markers begin at 0, for example, the DASI 300,
DASI 300s, and DASI 450.
Canned -code
Use one of the codes listed below to select a canned set of tabs. If
more than one code is specified, the last code option will be used.
The legal codes and their meanings are as follows:
-a 1,10,16,36,72 Assembler, IBM S/370, first format
-a2 1,10,16,40,72
Assembler, IBM S/370, second format
-c 1,8,12,16,20,55
COBOL, normal format
-c2 1,6,10,14,49
COBOL compact format (columns 1-6 omitted). Using this code, the
first typed character corresponds to card column 7, one space
gets you to column 8, and a tab reaches column 12. Files using
this tab setup should include a format specification as follows
(see fspec(4)):
<:t-c2 m6 s66 d:>
-c3 1,6,10,14,18,22,26,30,34,38,42,46,50,54,58,62,67
COBOL compact format (columns 1-6 omitted), with more tabs than
-c2. This is the recommended format for COBOL. The appropriate
format specification is (see fspec(4)):
<:t-c3 m6 s66 d:>
-f 1,7,11,15,19,23
FORTRAN
-p 1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61
PL/I
-s 1,10,55
SNOBOL
-u 1,12,20,44
UNIVAC 1100 Assembler
Repetitive
-n A repetitive specification requests tabs at columns 1+n, 1+2*n,
etc., where n is a single-digit decimal number. Of particular
importance is the value 8: this represents the UNIX system
``standard'' tab setting, and is the most likely tab setting to
be found at a terminal. When −0 is used, the tab stops are
cleared and no new ones are set.
Arbitrary
See OPERANDS.
File
-file If the name of a file is given, tabs reads the first line of
the file, searching for a format specification (see fspec(4)).
If it finds one there, it sets the tab stops according to it,
otherwise it sets them as −8. This type of specification may
be used to make sure that a tabbed file is printed with cor‐
rect tab settings, and would be used with the pr command:
example% tabs - file; pr file
Tab and margin setting is performed via the standard output.
OPERANDS
The following operand is supported:
n1[,n2,...] The arbitrary format consists of tab-stop values
separated by commas or spaces. The tab-stop val‐
ues must be positive decimal integers in ascend‐
ing order. Up to 40 numbers are allowed. If any
number (except the first one) is preceded by a
plus sign, it is taken as an increment to be
added to the previous value. Thus, the formats
1,10,20,30, and 1,10,+10,+10 are considered iden‐
tical.
EXAMPLES
Example 1 Using the tabs command
The following command is an example using -code ( canned specification)
to set tabs to the settings required by the IBM assembler: columns 1,
10, 16, 36, 72:
example% tabs-a
The next command is an example of using -n (repetitive specification),
where n is 8, causes tabs to be set every eighth position: 1+(1*8),
1+(2*8), ... which evaluate to columns 9, 17, ...:
example% tabs −8
This command uses n1,n2,... (arbitrary specification) to set tabs at
columns 1, 8, and 36:
example% tabs 1,8,36
The last command is an example of using -file (file specification) to
indicate that tabs should be set according to the first line of
$HOME/fspec.list/att4425 (see fspec(4)).
example% tabs -$HOME/fspec.list/att4425
ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables
that affect the execution of tabs: LANG, LC_ALL, LC_CTYPE, LC_MESSAGES,
and NLSPATH.
TERM Determine the terminal type. If this variable is unset or
null, and if the -T option is not specified, terminal type
ansi+tabs will be used.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWcs │
├─────────────────────────────┼─────────────────────────────┤
│CSI │Enabled │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Committed │
├─────────────────────────────┼─────────────────────────────┤
│Standard │See standards(5). │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOexpand(1), newform(1), pr(1), stty(1), tput(1), fspec(4), terminfo(4),
attributes(5), environ(5), term(5), standards(5)NOTES
There is no consistency among different terminals regarding ways of
clearing tabs and setting the left margin.
tabs clears only 20 tabs (on terminals requiring a long sequence), but
is willing to set 64.
The tabspec used with the tabs command is different from the one used
with the newform command. For example, tabs −8 sets every eighth posi‐
tion; whereas newform −i−8 indicates that tabs are set every eighth
position.
SunOS 5.11 1 Feb 1995 tabs(1)