sys_attrs_emx(5)sys_attrs_emx(5)NAMEsys_attrs_emx - emx subsystem attributes
DESCRIPTION
This reference page lists and describes attributes for the emx (emx)
kernel subsystem. Refer also to the emx(7) reference page for addi‐
tional emx kernel subsystem attributes.
Refer to the sys_attrs(5) reference page for an introduction to the
topic of kernel subsystem attributes. Maximum number of NPort I/Os.
This attribute is visible only if the Emulex Fibre Channel Host Adapter
is installed on the system. Refer to the emx(7) reference page for
information on setting this attribute.
Default value: 256.
To turn I/O limiting off, set the value of NPort_Max_IOs to
equal 0xFFFFFFFF.
Do not attempt to set the value of NPort_Max_IOs to less than
the value of NPort_Min_IOs. Minumum number of NPort I/Os. This
attribute is visible only if the Emulex Fibre Channel Host
Adapter is installed on the system. Refer to the emx(7) refer‐
ence page for information on setting this attribute.
Default value: 20.
The value of NPort_Min_IOs must always be less than the value of
NPort_Max_IOs. The NPort I/O ramp time delay in seconds. This
attribute is visible only if the Emulex Fibre Channel Host
Adapter is installed on the system. Refer to the emx(7) refer‐
ence page for information on setting this attribute.
Default value: 1. The NPort I/O ramp percentage (integer). This
attribute is visible only if the Emulex Fibre Channel Host
Adapter is installed on the system. Refer to the emx(7) refer‐
ence page for information on setting this attribute.
Default value: 10
SEE ALSOsys_attrs(5)emx(7)sys_attrs_emx(5)