sieve-connect(1)sieve-connect(1)NAMEsieve-connect - managesieve command-line client
SYNOPSISsieve-connect [-s <hostname>] [-p <portspec>] [-u <user>] [a <authzid>]
[-m <authmech>] [-r realm] [-e execscript]
[... longopts ...]
sieve-connect [--localsieve <script>] [--remotesieve <script>]
[--debug] [--dumptlsinfo]
[--server <hostname>] [--port <portspec>] [--4|--6]
[--user <authentication_id>] [--authzid <authzid>]
[--realm <realm>] [--passwordfd <n>]
[--clientkey <file> --clientcert <file>]|[--clientkeycert <file>]
[--notlsverify|--nosslverify]
[--tlscertfingerprint|--sslcertfingerprint <dgsttype:digest>]
[--tlscapath <ca_directory>]|[--tlscafile <ca_file>]
[--noclearauth] [--noclearchan]
[--authmech <mechanism>]
[--ignoreserverversion]
[--upload|--download|--list|--delete|--checkscript|--edit|
--activate|--deactivate]|[--exec <script>]
[--help|--man]
DESCRIPTIONsieve-connect is a client for the "MANAGESIEVE" protocol, which is an
RFC-specified protocol for manipulation of "Sieve" scripts in a
repository. More simply, sieve-connect lets you control your mail-
filtering rule files on a mail server.
sieve-connect can be invoked with an action from the command-line to
make it easy to script one-shot actions, it can be provided with a
script file or it can be left to enter an interactive command-loop,
where it supports tab-completion (if the supporting Perl module is
available) and basic navigation of the local file-system in the style
of "FTP" clients.
sieve-connect supports the use of "TLS" via the "STARTTLS" command,
including authentication via client certificates. "sieve-connect" also
supports whichever "SASL" mechanisms your Authen::SASL::Perl library
provides, as long as they do not require SASL protection layers.
In Interactive mode, a "help" command is available. Command parameters
with a "%" in them are examined to see if they match %KEYWORD, where
"KEYWORD" is always in upper-case. The list of keywords may be
retrieved with the "keywords" command and includes items such as %DATE,
%USER, etc.
OPTIONS
Option names may be given as the shortest unique prefix.
The remote sieve script name defaults to the same as the local sieve
script name, so just specify the local one if only one is needed; it
was a deliberate decision to have the defaults this way around, to make
people think about names in the local filesystem. There is no default
script name.
The --debug option turns on diagnostic traces. The --debugsasl option
asks the SASL library for debugging. The --dumptlsinfo shows the TLS
(SSL) peer information; if specified together with --debug then the
server's PEM certificate will be provided as debug trace.
The --version option shows version information. When combined with
--debug it will show implementation dependency versions. The --help
and --man options provide usage information.
The server can be a host or IP address, IPv4 or IPv6.
If a server is provided by --server then that takes precedence. If
that option is not present, then $IMAP_SERVER from the environment is
checked and, if it's not a unix-domain socket path, is used with any
port specification stripped off.
Next, unless --nosrv is given, checks are made for SRV records so as to
search for a default server; if the Mozilla::PublicSuffix Perl module
is available, these checks are done for every level of the hostname
upto (but not including) the public suffix. If that module is not
available, a crude heuristic is used: as long as there are three dots
in the hostname, SRV records for the part of the hostname after the
first dot are tried. If this is inappropriate, install
Mozilla::PublicSuffix.
If no SRV records are found which point to a 'sieve', 'imaps' or 'imap'
protocol service, of if a record is found which says "no such service
in this domain" (by having a target of "."), then the final default
server is localhost.
The port can be any Perl port specification, default is sieve(4190). A
port from an SRV record will take precedence. The Perl specification
provides a name to look up in the system services database
(/etc/services) followed in parentheses by a default value to use if
the name is not found. Thus this default will honour a value of 2000
from /etc/services.
The --4 or --6 options may be used to coerce IPv4 or IPv6.
By default, the server is taken to be a domain, for which SRV records
are looked up; use --nosrv to inhibit SRV record lookup.
The --user option will be required unless you're on a Unix system with
getpwuid() available and your Cyrus account name matches your system
account name. --authmech can be used to force a particular
authentication mechanism. --authzid can be used to request
authorisation to act as the specified id. --realm can be used to try
to pass realm information to the authentication mechanism. If you want
to provide a password programmatically, use --passwordfd to state which
file descriptor (typically 0) the password can be read from.
Everything until the newline before EOF is the password, so it can
contain embedded newlines. Do not provide passwords on a command-line
or in a process environment.
Unless modified at install/packaging time, by default SSL certificate
authority certificates are searched for. The first attempt is to try,
in turn, for environment variables $SSL_CERT_DIR & $SSL_CERT_FILE which
are the names supported by the OpenSSL library and so often supported
by client commands. Next, if the OpenSSL command "version" is
available and the output "OPENSSLDIR" can be parsed and the "certs"
directory exists within that directory, then that location will be
used. Finally, a fixed list of common locations are searched and the
first one to exist is used. Invoking with --debug will show more
details during the "setup:" phase.
Precedence above these defaults is given to the --tlscafile option if
given, else the --tlscapath option if that is given. The former is one
file containing certificates, the latter is a directory.
Alternatively, if you are willing to accept the risk of man-in-the-
middle active attacks and you are unable to arrange for the relevant
Certificate Authority certificate to be available, then you can lower
your safety with the --notlsverify option, also spelt --nosslverify.
If you don't want to (only) rely on CA systems you can explicitly set
an expected server certificate fingerprint using the
--tlscertfingerprint option, also spelt --sslcertfingerprint. If you
wish to ignore CA validation, you still need to disable that explicitly
(see above), as the default is to add an extra constraint (pinning,
within valid CA certificates). This option specifies the X.509
certificate fingerprint (not a public key fingerprint), as given by
OpenSSL. The first part of the value should be an algorithm name, such
as "sha256" or "sha1". That is followed by a colon, and then the
fingerprint data in its usual colon-delimited hexadecimal notation.
Eg: "--tlscertfingerprint sha256:24:B4:..28-more-fields..:A8:58"
For SSL client certificate authentication, either --clientkeycert may
be used to refer to a file with both the key and cert present or both
--clientkey and --clientcert should point to the relevant files. The
data should be in PEM file-format.
The --noclearauth option will prevent use of cleartext authentication
mechanisms unless protected by TLS. The --noclearchan option will
mandate use of some confidentiality layer; at this time only TLS is
supported.
By default, the server's "VERSION" capability will be used to filter
the commands available. Use --ignoreserverversion to prevent this.
The remaining options denote actions. One, and only one, action may be
present. If no action is present, the interactive mode is entered. If
the exec action is present, commands are read from the script instead.
--upload will upload a script to the server.
--download will download a script from the server.
--list will list the scripts which exist on the server. One of those
scripts might be marked ACTIVE.
--delete will delete a script from the server.
--checkscript will ask the server to validate the local file provided.
--edit will download a script, invoke an editor upon it, ask the server
to check the results (and offer to re-edit if the server rejects it)
and finally upload the result.
--activate will mark the specified remote script as the active one.
--deactivate will remove the active mark from the specified remote
script without activating a replacement.
--exec will take a file-name containing commands as though given in the
normal read-eval-print loop.
Note that --check and --edit require a server which advertises a
"VERSION" capability, see --ignoreserverversion to override.
(If --server is not explicitly stated, it may be provided at the end of
the command-line for compatibility with sieveshell.)
ENVIRONMENT
$IMAP_SERVER for a default IMAP server.
$USERNAME and $LOGNAME where the "getpwuid()" function is not
available.
$SSL_CERT_DIR and $SSL_CERT_FILE for locating default Certificate
Authority trust anchors.
$VISUAL, else $EDITOR, for the edit action.
BUGS
If the authentication protocol negotiates a protection layer then
things will rapidly Go Bad. A mitigating factor is that no protection
layer should be negotiated whilst under STARTTLS protection. Just use
TLS!
When listing scripts, the format is based upon the raw server output,
assuming that the server uses quoted-strings for the script names. The
output is just passed back on the basis that it's a fairly good
interface to pass to a program. But a server could choose to use
literal strings, even though the results are defined as line-break
separated -- that would mean that some linebreaks are special.
Hopefully no server will do this.
If sieve-connect fails to connect to an IPv4 server without the -4
option being explicitly passed, then you've encountered a portability
issue in the IO::Socket::INET6 Perl library and need to upgrade that.
Most historical implementations used port 2000 for ManageSieve.
RFC5804 allocates port 4190. This tool uses a port-spec of
"sieve(4190)" as the default port, which means that an /etc/services
(or substitute) entry for "sieve" as a TCP service takes precedence,
but if that is not present, will assume 4190 as the default. This
change means that if you're still using port 2000 and do not have an
/etc/services entry, updating to/beyond release 0.75 of this tool will
break invocations which do not specify a port. The specification of
the default port was moved to the user-configurable section at the top
of the script and administrators may wish to override the shipped
default. You can bypass all of this mess by publishing SRV records,
per RFC5804.
The Net::DNS Perl module does not (at time of writing) provide full
support for weighted prioritised SRV records and I have not made any
effort to fix this; whatever the default sort algorithm provides for
SRV is what is used for ordering.
If you don't specify a server and don't export $IMAP_SERVER in the
environment then the search mechanism is safer and more thorough if the
Mozilla::PublicSuffix Perl module is installed. In particular, if your
hostname is also your domain name and the parent domain is administered
by someone you don't trust, then you'll regret not installing that
module.
Probably need to sit down and work through the final RFC and see if any
functionality is still missing.
NON-BUGS
Actually uses STARTTLS. Can handle script names with embedded
whitespace. Author needs access to a server which handles embedded
quote characters properly to complete testing of that.
HISTORYsieve-connect was written as a demonstration for the "info-cyrus"
mailing-list, 2006-11-14. It was a single-action-and-quit script for
scripting purposes. The command-loop code was written (two days) later
and deliberately designed to be compatible with sieveshell.
Versions prior to 0.85 did not actually verify the peer certificate
identity, although this author stupidly believed that it did.
API/expectations mismatch.
AUTHOR
Phil Pennock <phil-perl@spodhuis.org> is guilty, m'Lud.
There is a low-volume announcement list for new releases; the web
interface is at
http://mail.globnix.net/mailman/listinfo/sieve-connect-announce
<http://mail.globnix.net/mailman/listinfo/sieve-connect-announce> or
you can send mail,
mailto:sieve-connect-announce-request@spodhuis.org?subject=subscribe
<mailto:sieve-connect-announce-request@spodhuis.org?subject=subscribe>
PREREQUISITES
Perl. Authen::SASL. IO::Socket::INET6. IO::Socket::SSL (at least
version 1.14). Pod::Usage. Net::DNS for SRV lookup.
Pod::Simple::Text for built-in man command (optional). Term::ReadKey
to get passwords without echo. Various other Perl modules which are
believed to be standard. Term::ReadLine will significantly improve
interactive mode. Term::ReadLine::Gnu will improve it further by
allowing tab-completion. Mozilla::PublicSuffix is highly recommended
and will improve security.
INTEROPERABILITYsieve-connect is regularly tested with the timsieved server distributed
with the Cyrus IMAP server. Further interoperability testing is
underway, more is desired (test accounts appreciated!).
0.87 2013-12-03 sieve-connect(1)