rwcombine(1) SiLK Tool Suite rwcombine(1)NAMErwcombine - Combine flows denoting a long-lived session into a single
flow
SYNOPSISrwcombine [--actions=ACTIONS] [--ignore-fields=FIELDS]
[--max-idle-time=NUM]
[{--print-statistics | --print-statistics=FILENAME}]
[--temp-directory=DIR_PATH] [--buffer-size=SIZE]
[--note-add=TEXT] [--note-file-add=FILE]
[--compression-method=COMP_METHOD] [--print-filenames]
[--output-path=PATH] [--site-config-file=FILENAME]
{[--xargs] | [--xargs=FILENAME] | [FILE [FILE ...]]}
rwcombine--help
rwcombine--help-fields
rwcombine--version
DESCRIPTIONrwcombine reads SiLK Flow records from one or more input sources,
searches for flow records where the attributes field denotes records
that were prematurely created or were continuations of prematurely
created flows, and attempts to combine those records into a single
record. All the unmodified SiLK records and the combined records are
written to the file specified by the --output-path switch or to the
standard output when the --output-path switch is not provided and the
standard output is not connected to a terminal.
Some flow exporters, such as yaf(1), provide fields that describe
characteristics about the flow record, and these characteristics are
stored in the attributes field of SiLK Flow records. The two flags
that rwcombine considers are:
"T" The flow generator prematurely created a record for a long-lived
session due to the connection's lifetime reaching the active
timeout of the flow generator. (Also, when yaf is run with the
--silk switch, it prematurely creates a flow and marks it with "T"
if the byte count of the flow cannot be stored in a 32-bit value.)
"C" The flow generator created this flow as a continuation of long-
running connection, where the previous flow for this connection met
a timeout. (yaf only sets this flag when it is invoked with the
--silk switch.)
A very long-running session may be represented by multiple flow
records, where the first record is marked with the "T" flag, the final
record is marked with the "C" flag, and intermediate records are marked
with both "C" (this record continues an earlier flow) and "T" (this
record also met the active time-out). rwcombine attempts to combine
these multiple flow records into a single record.
The input to rwcombine does not need to be sorted. As part of its
processing, rwcombine may re-order the records before writing them.
rwcombine reads SiLK Flow records from the files named on the command
line or from the standard input when no file names are specified and
--xargs is not present. To read the standard input in addition to the
named files, use "-" or "stdin" as a file name. If an input file name
ends in ".gz", the file will be uncompressed as it is read. When the
--xargs switch is provided, rwcombine will read the names of the files
to process from the named text file, or from the standard input if no
file name argument is provided to the switch. The input to --xargs
must contain one file name per line.
Algorithm
The algorithm rwcombine uses to combine records is
1. rwcombine reads SiLK flow records, examines the attributes field on
each record, and immediately writes to the destination stream all
records where both the time-out flag ("T") and the continuation
flag ("C") are not set. Records where one or both of those flags
are set are stored until all input records have been read.
2. rwcombine groups the stored records into bins where the following
fields for each record in each bin are identical: sIP, dIP, sPort,
dPort, protocol, sensor, in, out, nhIP, application, class, and
type.
3. For each bin, the records are stored by time (sTime and elapsed).
4. Within a bin, rwcombine combines two records into a single record
when the attributes field of the first record has the "T" (time-
out) flag set and the second record has the "C" (continuation) flag
set. When combining records, the bytes field and packets fields
are summed, the initialFlags from the first record is used, the
sessionFlags field becomes the bit-wise OR of both sessionFlags
fields and the second record's initialFlags field, and the eTime is
set to that of the second flow.
5. If the second record's "T" flag was set, rwcombine checks to see if
the third record's "C" flag is set. If it is, the third record
becomes part of the new record.
6. The previous step repeats for the records in the bin until the bin
contains a single record, the most recently added record did not
have the "T" flag set, or the next record in the bin does not have
the "C" flag set.
7. After examining a bin, rwcombine writes the record(s) the bin
contains to the destination stream.
8. Steps 3 through 7 are repeated for each bin.
The --ignore-fields switch allows the user to remove fields from the
set that rwcombine uses when grouping records in Step 2.
When combining two records into one (Step 4), rwcombine completely
disregards the difference between the first record's end-time and the
second record's start-time (the idle time). To tell rwcombine not to
combine those records when the difference is greater than a limit,
specify that value as the argument to the --max-idle-time switch.
To see information on the number of flows combined and the minimum and
maximum idle times, specify the --print-statistics switch.
During its processing, rwcombine will try to allocate a large (near
2GB) in-memory array to hold the records. (You may use the
--buffer-size switch to change this maximum buffer size.) If more
records are read than will fit into memory, the in-core records are
temporarily stored on disk as described by the --temp-directory switch.
When all records have been read, the on-disk files are merged to
produce the output.
By default, the temporary files are stored in the /tmp directory.
Because the sizes of the temporary files may be large, it is strongly
recommended that /tmp not be used as the temporary directory, and
rwcombine will print a warning when /tmp is used. To modify the
temporary directory used by rwcombine, provide the --temp-directory
switch, set the SILK_TMPDIR environment variable, or set the TMPDIR
environment variable.
OPTIONS
Option names may be abbreviated if the abbreviation is unique or is an
exact match for an option. A parameter to an option may be specified
as --arg=param or --arg param, though the first form is required for
options that take optional parameters.
--actions=ACTIONS
Select the type of action(s) that rwcombine should take to combine
the input records. The default action is "all", and the following
actions are supported:
all Perform all the actions described below.
timeout
Combine into a single flow record those records where the
timeout flags in the attributes field indicate that the flow
exporter has divided a long-lived session into multiple flow
records.
This switch is provided for future expansion of rwcombine, since at
present rwcombine supports a single action. When writing a script
that uses rwcombine, specify --action=timeout for compatibility
with future versions of rwcombine.
--ignore-fields=FIELDS
Ignore the fields listed in FIELDS when determining if two flow
records should be grouped into the same bin; that is, treat FIELDS
as being identical across all flows. By default, rwcombine puts
records into a bin when the records have identical values for the
following fields: sIP, dIP, sPort, dPort, protocol, sensor, in,
out, nhIP, application, class, and type.
FIELDS is a comma separated list of field-names, field-integers,
and ranges of field-integers; a range is specified by separating
the start and end of the range with a hyphen (-). Field-names are
case-insensitive. Example:
--ignore-fields=sensor,12-15
The list of supported fields are:
sIP,1
source IP address
dIP,2
destination IP address
sPort,3
source port for TCP and UDP, or equivalent
dPort,4
destination port for TCP and UDP, or equivalent
protocol,5
IP protocol
sensor,12
name or ID of sensor at the collection point
in,13
router SNMP input interface or vlanId if packing tools were
configured to capture it (see sensor.conf(5))
out,14
router SNMP output interface or postVlanId
nhIP,15
router next hop IP
class,20,type,21
class and type of sensor at the collection point (represented
internally by a single value)
application,29
guess as to the content of the flow. Some software that
generates flow records from packet data, such as yaf(1), will
inspect the contents of the packets that make up a flow and use
traffic signatures to label the content of the flow. SiLK
calls this label the application; yaf refers to it as the
appLabel. The application is the port number that is
traditionally used for that type of traffic (see the
/etc/services file on most UNIX systems). For example, traffic
that the flow generator recognizes as FTP will have a value of
21, even if that traffic is being routed through the standard
HTTP/web port (80).
--max-idle-time=NUM
Do not combine flow records when the start time of the second flow
record begins NUM seconds after the end time of the first flow
record. NUM may be fractional. If not specified, the maximum idle
time may be considered infinite.
--print-statistics
--print-statistics=FILENAME
Print to the standard error or to the specified FILENAME the number
of flows records read and written, the number of flows that did not
require combining, the number of flows combined, the number that
could not be combined, and minimum and maximum idle time between
combined flow records.
--temp-directory=DIR_PATH
Specify the name of the directory in which to store data files
temporarily when more records have been read that will fit into
RAM. This switch overrides the directory specified in the
SILK_TMPDIR environment variable, which overrides the directory
specified in the TMPDIR variable, which overrides the default,
/tmp.
--buffer-size=SIZE
Set the maximum size of the buffer to use for holding the records,
in bytes. A larger buffer means fewer temporary files need to be
created, reducing the I/O wait times. The default maximum for this
buffer is near 2GB. The SIZE may be given as an ordinary integer,
or as a real number followed by a suffix "K", "M" or "G", which
represents the numerical value multiplied by 1,024 (kilo),
1,048,576 (mega), and 1,073,741,824 (giga), respectively. For
example, 1.5K represents 1,536 bytes, or one and one-half
kilobytes. (This value does not represent the absolute maximum
amount of RAM that rwcombine will allocate, since additional
buffers will be allocated for reading the input and writing the
output.)
--output-path=PATH
Write the SiLK Flow records to the specified file or named pipe.
When the standard output is not a terminal and this switch is not
provided or its argument is "-" or "stdout", the records are
written to the standard output.
--note-add=TEXT
Add the specified TEXT to the header of the output file as an
annotation. This switch may be repeated to add multiple
annotations to a file. To view the annotations, use the
rwfileinfo(1) tool.
--note-file-add=FILENAME
Open FILENAME and add the contents of that file to the header of
the output file as an annotation. This switch may be repeated to
add multiple annotations. Currently the application makes no
effort to ensure that FILENAME contains text; be careful that you
do not attempt to add a SiLK data file as an annotation.
--compression-method=COMP_METHOD
Specify how to compress the output. When this switch is not given,
output to the standard output or to named pipes is not compressed,
and output to files is compressed using the default chosen when
SiLK was compiled. The valid values for COMP_METHOD are determined
by which external libraries were found when SiLK was compiled. To
see the available compression methods and the default method, use
the --help or --version switch. SiLK can support the following
COMP_METHOD values when the required libraries are available.
none
Do not compress the output using an external library.
zlib
Use the zlib(3) library for compressing the output, and always
compress the output regardless of the destination. Using zlib
produces the smallest output files at the cost of speed.
lzo1x
Use the lzo1x algorithm from the LZO real time compression
library for compression, and always compress the output
regardless of the destination. This compression provides good
compression with less memory and CPU overhead.
best
Use lzo1x if available, otherwise use zlib. Only compress the
output when writing to a file.
--print-filenames
Print to the standard error the names of input files as they are
opened.
--site-config-file=FILENAME
Read the SiLK site configuration from the named file FILENAME.
When this switch is not provided, rwcombine searches for the site
configuration file in the locations specified in the "FILES"
section.
--xargs
--xargs=FILENAME
Causes rwcombine to read file names from FILENAME or from the
standard input if FILENAME is not provided. The input should have
one file name per line. rwcombine will open each file in turn and
read records from it, as if the files had been listed on the
command line.
--help
Print the available options and exit.
--help-fields
Print the description and alias(es) of each field and exit.
--version
Print the version number and information about how SiLK was
configured, then exit the application.
EXAMPLES
In the following examples, the dollar sign ("$") represents the shell
prompt. The text after the dollar sign represents the command line.
Lines have been wrapped for improved readability, and the back slash
("\") is used to indicate a wrapped line.
The output from rwcut(1) shows the flow exporter split this long-lived
ssh session into multiple flow records:
$ rwfilter --saddr=192.168.126.252 --dport=22 --pass=- data.rw \
| rwcut --fields=flags,attributes,stime,etime
flags|attribut| sTime| eTime|
S PA |T |2009/02/13T00:29:59.563|2009/02/13T00:59:39.668|
PA |TC |2009/02/13T00:59:39.668|2009/02/13T01:29:19.478|
PA |TC |2009/02/13T01:29:19.478|2009/02/13T01:58:48.890|
PA |TC |2009/02/13T01:58:48.891|2009/02/13T02:28:43.599|
F PA | C |2009/02/13T02:28:43.600|2009/02/13T02:32:58.272|
Here is the other half of that conversation:
$ rwfilter --daddr=192.168.126.252 --sport=22 --pass=- data.rw \
| rwcut --fields=flags,attributes,stime,etime
flags|attribut| sTime| eTime|
S PA |T |2009/02/13T00:30:00.060|2009/02/13T00:59:39.667|
PA |TC |2009/02/13T00:59:39.670|2009/02/13T01:29:19.478|
PA |TC |2009/02/13T01:29:19.481|2009/02/13T01:58:48.890|
PA |TC |2009/02/13T01:58:48.893|2009/02/13T02:28:43.599|
F PA | C |2009/02/13T02:28:43.600|2009/02/13T02:32:58.271|
Use rwuniq(1) to compute the byte and packet counts for that ssh
session:
$ rwfilter --any-addr=192.168.126.252 --aport=22 --pass=- data.rw \
| rwuniq --fields=sip,dip,sport,dport --values=records,byte,packets
sIP| dIP|sPort|dPort|Records| Bytes|Packets|
10.11.156.107|192.168.126.252| 22|28975| 5|4677240| 3881|
192.168.126.252| 10.11.156.107|28975| 22| 5| 281939| 3891|
Invoke rwcombine on these records and store the result in the file
combined.rw:
$ rwfilter --any-addr=192.168.126.252 --aport=22 --pass=- data.rw \
| rwcombine--print-statistics --output-path=combined.rw
FLOW RECORD COUNTS:
Read: 10
Initially Complete: - 0 *
Sorted & Examined: = 10
Missing end: - 0 *
Missing start & end: - 0 *
Missing start: - 0 *
Prior to combining: = 10
Eliminated: - 8
Made complete: = 2 *
Written: 2 (sum of *)
IDLE TIMES:
Minimum: 0:00:00:00.000
Penultimate: 0:00:00:00.000
Maximum: 0:00:00:00.003
View the resulting records:
$ rwcut --fields=sip,dip,sport,dport,bytes,packets,flags combined.rw
sIP| dIP|sPort|dPort| bytes|packets| flags|
10.11.156.107|192.168.126.252| 22|28975|4677240| 3881|FS PA |
192.168.126.252| 10.11.156.107|28975| 22| 281939| 3891|FS PA |
$ rwcut --fields=sip,attributes,stime,etime combined.rw
sIP|attribut| sTime| eTime|
10.11.156.107| |2009/02/13T00:30:00.060|2009/02/13T02:32:58.271|
192.168.126.252| |2009/02/13T00:29:59.563|2009/02/13T02:32:58.272|
ENVIRONMENT
SILK_TMPDIR
When set and --temp-directory is not specified, rwcombine writes
the temporary files it creates to this directory. SILK_TMPDIR
overrides the value of TMPDIR.
TMPDIR
When set and SILK_TMPDIR is not set, rwcombine writes the temporary
files it creates to this directory.
SILK_CLOBBER
The SiLK tools normally refuse to overwrite existing files.
Setting SILK_CLOBBER to a non-empty value removes this restriction.
SILK_CONFIG_FILE
This environment variable is used as the value for the
--site-config-file when that switch is not provided.
SILK_DATA_ROOTDIR
This environment variable specifies the root directory of data
repository. As described in the "FILES" section, rwcombine may use
this environment variable when searching for the SiLK site
configuration file.
SILK_PATH
This environment variable gives the root of the install tree. When
searching for configuration files, rwcombine may use this
environment variable. See the "FILES" section for details.
SILK_TEMPFILE_DEBUG
When set to 1, rwcombine prints debugging messages to the standard
error as it creates, re-opens, and removes temporary files.
FILES
${SILK_CONFIG_FILE}
${SILK_DATA_ROOTDIR}/silk.conf
/data/silk.conf
${SILK_PATH}/share/silk/silk.conf
${SILK_PATH}/share/silk.conf
/usr/local/share/silk/silk.conf
/usr/local/share/silk.conf
Possible locations for the SiLK site configuration file which are
checked when the --site-config-file switch is not provided.
${SILK_TMPDIR}/
${TMPDIR}/
/tmp/
Directory in which to create temporary files.
SEE ALSOrwfilter(1), rwcut(1), rwuniq(1), rwfileinfo(1), sensor.conf(5),
silk(7), yaf(1), zlib(3)NOTES
The first release of rwcombine occurred in SiLK 3.9.0.
SiLK 3.11.0.1 2016-02-19 rwcombine(1)