rpm(8) Red Hat Software (22 December 1998) rpm(8)
NAME
rpm - Red Hat Package Manager
SYNOPSIS
rpm [options]
DESCRIPTION
rpm is a powerful package manager, which can be used to
build, install, query, verify, update, and uninstall
individual software packages. A package consists of an
archive of files, and package information, including name,
version, and description.
One of the following basic modes must be selected:
Initialize Database, Rebuild Database, Build Package,
Recompile Package, Build Package from Tarball, Query, Show
Querytags, Install, Freshen, Uninstall, Verify, Signature
Check, Resign, Add Signature, set owners and groups and Show
Configuration.
Database maintenance:
rpm-i [--initdb]
rpm-i [--rebuilddb]
Building:
rpm [-b|t] [package_spec]+
rpm [--rebuild] [sourcerpm]+
rpm [--tarbuild] [tarredsource]+
Querying:
rpm [--query] [queryoptions]
rpm [--querytags]
Maintaining installed packages:
rpm [--install] [installoptions] [package_file]+
rpm [--freshen|-F] [installoptions] [package_file]+
rpm [--uninstall|-e] [uninstalloptions] [package]+
rpm [--verify|-V] [verifyoptions] [package]+
Signatures:
rpm [--verify|-V] [verifyoptions] [package]+
rpm [--resign] [package_file]+
rpm [--addsign] [package_file]+
Miscellaneous:
rpm [--showrc]
rpm [--setperms] [package]+
rpm [--setgids] [package]+
Page 1 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
GENERAL OPTIONS
These options can be used in all the different modes.
-vv Print lots of ugly debugging information.
--quiet
Print as little as possible - normally only error
messages will be displayed.
--help
Print a longer usage message then normal.
--version
Print a single line containing the version number of
rpm being used.
--rcfile <filelist>
Each of the files in the colon separated <filelist> is
read sequentially by rpm for configuration information.
The default <filelist> is
/usr/lib/rpm/rpmrc:/etc/rpmrc:~/.rpmrc. Only the first
file in the list must exist, and tildes will be
expanded to the value of $HOME.
--root <dir>
Use the system rooted at <dir> for all operations.
Note that this means the database will be read or
modified under <dir> and any pre or post scripts are
run after a chroot() to <dir>.
--dbpath <path>
Use RPM database in <path>.
--justdb
Update only the database, not the filesystem.
--ftpproxy <host>, --httpproxy <host>
Use <host> as an FTP or HTTP proxy host. See FTP/HTTP
OPTIONS.
--ftpport <port>, --httpport <port>
Use <port> as the FTP or HTTP port on the proxy host.
See FTP/HTTP OPTIONS.
--pipe <cmd>
Pipes the output of rpm to the command <cmd>.
INSTALL AND UPGRADE OPTIONS
The general form of an rpm install command is
rpm-i [install-options] <package_file>+
Page 2 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
This installs a new package. The general form of an rpm
upgrade command is
rpm-U [install-options] <package_file>+
This upgrades or installs the package currently installed to
the version in the new RPM. This is the same as install,
except all other version of the package are removed from the
system.
rpm [-F|--freshen] [install-options] <package_file>+
This will upgrade packages, but only if an earlier version
currently exists.
The <package_file> may be specified as an ftp or http URL,
in which case the package will be downloaded before being
installed. See FTP/HTTP OPTIONS for information on RPM's
built-in ftp and http support.
--force
Same as using --replacepkgs, --replacefiles, and
--oldpackage.
-h, --hash
Print 50 hash marks as the package archive is unpacked.
Use with -v for a nice display.
--oldpackage
Allow an upgrade to replace a newer package with an
older one.
--percent
Print percentages as files are unpacked from the
package archive. This is intended to make RPM easy to
run from other tools.
--replacefiles
Install the packages even if they replace files from
other, already installed, packages.
--replacepkgs
Install the packages even if some of them are already
installed on this system.
--allfiles
Installs or upgrades all the missingok files in the
package, regardless if they exist.
--nodeps
Don't do a dependency check before installing or
Page 3 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
upgrading a package.
--noscripts
Don't execute the preinstall or postinstall scripts.
--notriggers
Don't execute scripts which are triggered by the
installation of this package.
--ignoresize
Don't check mount file systems for sufficient disk
space before installing this package.
--excludepath <path>
Don't install files whose name begins with <path>.
--excludedocs
Don't install any files which are marked as
documentation (which includes man pages and texinfo
documents).
--includedocs
Install documentation files. This is the default
behavior.
--test
Do not install the package, simply check for and report
potential conflicts.
--ignorearch
This allows installation or upgrading even if the
architectures of the binary RPM and host don't match.
--ignoreos
This allows installation or upgrading even if the
operating systems of the binary RPM and host don't
match.
--prefix <path>
This sets the installation prefix to <path> for
relocatable packages.
--relocate <oldpath>=<newpath>
For relocatable packages, translates the files that
would be put in <oldpath> to <newpath>.
--badreloc
To be used in conjunction with --relocate, this forces
the relocation even if the package isn't relocatable.
--noorder
Don't reorder the packages for an install. The list of
Page 4 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
packages would normally be reordered to satisfy
dependancies.
QUERY OPTIONS
The general form of an rpm query command is
rpm-q [query-options]
You may specify the format that package information should
be printed in. To do this, you use the [--queryformat|-qf]
option, followed by the format string.
Query formats are modifed versions of the standard printf(3)
formatting. The format is made up of static strings (which
may include standard C character escapes for newlines, tabs,
and other special characters) and printf(3) type formatters.
As rpm already knows the type to print, the type specifier
must be omitted however, and replaced by the name of the
header tag to be printed, enclosed by {} characters. The
RPMTAG_ portion of the tag name may be omitted.
Alternate output formats may be requested by following the
tag with :typetag. Currently, the following types are
supported: octal, date, shescape, perms, fflags, and
depflags.
For example, to print only the names of the packages
queried, you could use %{NAME} as the format string. To
print the packages name and distribution information in two
columns, you could use %-30{NAME}%{DISTRIBUTION}.
rpm will print a list of all of the tags it knows about when
it is invoked with the --querytags argument.
There are two subsets of options for querying: package
selection, and information selection.
Package selection options:
<package_name>
Query installed package named <package_name>.
-a, --all
Query all installed packages
--whatrequires <capability>
Query all packages that requires <capability> for
proper functioning.
--whatprovides <virtual>
Page 5 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
Query all packages that provide the <virtual>
capability.
-f <file>, --file <file>
Query package owning <file>.
-g <group>, --group <group>
Query packages with the group of <group>.
-p <package_file>
Query an (uninstalled) package <package_file>. The
<package_file> may be specified as an ftp or http style
URL, in which case the package header will be
downloaded and queried. See FTP/HTTP OPTIONS for
information on RPM's built-in ftp and http client
support.
--specfile <specfile>
Parse and query <specfile> as if it were a package.
Although not all the information (e.g. file lists) is
available, this type of query permits rpm to be used to
extract information from spec files without having to
write a specfile parser.
--querybynumber <num>
Query the <num>th database entry directly; this is
helpful for debugging purposes.
--triggeredby <pkg>
Query packages that are triggered by packages <pkg>.
Information selection options:
-i Display package information, including name, version,
and description. This uses the --queryformat if one was
specified.
-R, --requires
List packages on which this package depends.
--provides
List capabilities this package provides.
--changelog
Display change information for the package.
-l, --list
List files in package.
-s, --state
Display the states of files in the package (implies
Page 6 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
-l). The state of each file is either normal, not
installed, or replaced.
-d, --docfiles
List only documentation files (implies -l).
-c, --configfiles
List only configuration files (implies -l).
--scripts
List the package specific shell scripts that are used
as part of the installation and uninstallation
processes, if there are any.
--triggers, --triggerscripts
Display the trigger scripts, if any, which are
contained in the package.
--dump
Dump file information as follows: path size mtime
md5sum mode owner group isconfig isdoc rdev symlink.
This must be used with at least one of -l, -c, -d.
--last
Orders the package listing by install time such that
the latest packages are at the top.
--filesbypkg
This lists all the files in each package.
--triggerscripts
Shows all the trigger scripts for the selected
packages.
VERIFY OPTIONS
The general form of an rpm verify command is
rpm -V|-y|--verify [verify-options]
Verifying a package compares information about the installed
files in the package with information about the files taken
from the original package and stored in the rpm database.
Among other things, verifying compares the size, MD5 sum,
permissions, type, owner and group of each file. Any
discrepencies are displayed. The package specification
options are the same as for package querying.
Files that were not installed from the package, for example
documentation files excluded on installation using the
"--excludedocs" option, will be silently ignored.
Page 7 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
Options that can be used in verify mode:
--nofiles
Ignores missing files when verifying.
--nomd5
Ignores MD5 checksum errors when verifying.
--nopgp
Ignores PGP checking errors when verifying.
--nofiles
Ignores missing files when verifying.
The format of the output is a string of 8 characters, a
possible "c" denoting a configuration file, and then
the file name. Each of the 8 characters denotes the
result of a comparison of one attribute of the file to
the value of that attribute recorded in the RPM
database. A single "." (period) means the test passed.
The following characters denote failure of certain
tests:
5 MD5 sum
S File size
L Symlink
T Mtime
D Device
U User
G Group
M Mode (includes permissions and file type)
SIGNATURE CHECKING
The general form of an rpm signature check command is
rpm--checksig <package_file>+
This checks the PGP signature of package <package_file> to
ensure its integrity and origin. PGP configuration
information is read from configuration files. See the
section on PGP SIGNATURES for details.
Page 8 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
UNINSTALL OPTIONS
The general form of an rpm uninstall command is
rpm-e <package_name>+
--allmatches
Remove all versions of the package which match
<package_name>. Normally an error is issued if
<package_name> matches multiple packages.
--noscripts
Don't execute the preuninstall or postuninstall
scripts.
--notriggers
Don't execute scripts which are triggered by the
removal of this package.
--nodeps
Don't check dependencies before uninstalling the
packages.
--test
Don't really uninstall anything, just go through the
motions. Useful in conjunction with the -vv option.
BUILD OPTIONS
The general form of an rpm build command is
rpm -[b|t]O [build-options] <package_spec>+
The argument used is -b if a spec file is being used to
build the package and -t if RPM should look inside of a
gzipped (or compressed) tar file for the spec file to use.
After the first argument, the next argument (O) specifies
the stages of building and packaging to be done and is one
of:
-bp Executes the "%prep" stage from the spec file.
Normally this involves unpacking the sources and
applying any patches.
-bl Do a "list check". The "%files" section from the spec
file is macro expanded, and checks are made to verify
that each file exists.
-bc Do the "%build" stage from the spec file (after doing
the prep stage). This generally involves the
equivalent of a "make".
Page 9 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)-bi Do the "%install" stage from the spec file (after doing
the prep and build stages). This generally involves
the equivalent of a "make install".
-bb Build a binary package (after doing the prep, build,
and install stages).
-bs Build just the source package (after doing the prep,
build, and install stages).
-ba Build binary and source packages (after doing the prep,
build, and install stages).
The following options may also be used:
--short-circuit
Skip straight to specified stage (ie, skip all stages
leading up to the specified stage). Only valid with
-bc and -bi.
--timecheck
Set the "timecheck" age (0 to disable). This value can
also be configured by defining the macro "_timecheck".
The timecheck value expresses, in seconds, the maximum
age of a file being packaged. Warnings will be printed
for all files beyond the timecheck age.
--clean
Remove the build tree after the packages are made.
--rmsource
Remove the sources and spec file after the build (may
also be used standalone, eg. "rpm --rmsource
foo.spec").
--test
Do not execute any build stages. Useful for testing
out spec files.
--sign
Embed a PGP signature in the package. This signature
can be used to verify the integrity and the origin of
the package. See the section on PGP SIGNATURES for
configuration details.
--buildroot <dir>
When building the package, override the BuildRoot tag
with directory <dir>.
--target <platform>
When building the package, interpret <platform> as
arch-vendor-os and set the macros _target, _target_arch
Page 10 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
and _target_os accordingly.
--buildarch <arch>
When building the package, set the architecture to
<arch>. This option has been obsoleted by --target in
RPM 3.0.
--buildos <os>
When building the package, set the architecture to
<os>. This option has been obsoleted by --target in RPM
3.0.
REBUILD AND RECOMPILE OPTIONS
There are two other ways to invoke building with rpm:
rpm--recompile <source_package_file>+
rpm--rebuild <source_package_file>+
When invoked this way, rpm installs the named source
package, and does a prep, compile and install. In addition,
--rebuild builds a new binary package. When the build has
completed, the build directory is removed (as in --clean)
and the the sources and spec file for the package are
removed.
SIGNING AN EXISTING RPM
rpm--resign <binary_package_file>+
This option generates and inserts new signatures for the
listed packages. Any existing signatures are removed.
rpm--addsign <binary_package_file>+
This option generates and appends new signatures for the
listed packages to those that already exist.
PGP SIGNATURES
In order to use the signature feature RPM must be configured
to run PGP, and it must be able to find a public key ring
with RPM public keys in it. By default, RPM uses the PGP
defaults to find the keyrings (honoring PGPPATH). If your
key rings are not located where PGP expects them to be, you
will need to configure the macro
_pgp_path
to be the location of the PGP key rings to use.
Page 11 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
If you want to be able to sign packages you create yourself,
you also need to create your own public and secret key pair
(see the PGP manual). You will also need to configure the
macros
_signature
The signature type. Right now only pgp is supported.
_pgp_name
The name of the "user" whose key you wish to use to
sign your packages.
When building packages you then add --sign to the command
line. You will be prompted for your pass phrase, and your
package will be built and signed.
For example, to be able to use PGP to sign packages as the
user "John Doe <jdoe@foo.com>" from the key rings located in
/etc/rpm/.pgp using the executable /usr/bin/pgp you would
include
%_signature pgp
%_pgp_name /etc/rpm/.pgp
%_pgp_name John Doe <jdoe@foo.com>
%_pgpbin /usr/bin/pgp
in a macro configuration file. Use /etc/rpm/macros for per-
system configuration and ~/.rpmmacros for per-user
configuration.
REBUILD DATABASE OPTIONS
The general form of an rpm rebuild database command is
rpm--rebuilddb
To rebuild a new database, do:
rpm--initdb
The only options for these modes are --dbpath and --root.
SHOWRC
Running
rpm--showrc
Page 12 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
shows the values RPM will use for all of the options that
may be set in rpmrc files.
FTP/HTTP OPTIONS
RPM includes simple FTP and HTTP clients to simplify
installing and querying packages which are available over
the internet. Package files for install, upgrade, and query
operations may be specified as an ftp or http style URL:
ftp://<user>:<password>@hostname:<port>/path/to/package.rpm
If the :password portion is omitted, the password will be
prompted for (once per user/hostname pair). If both the user
and password are omitted, anonymous ftp is used. In all
cases passive (PASV) ftp transfers are used.
RPM allows the following options to be used with ftp URLs:
--ftpproxy <hostname>
The host <hostname> will be used as a proxy server for
all ftp transfers, which allows users to ftp through
firewall machines which use proxy systems. This option
may also be specified by configuring the macro
_ftpproxy.
--ftpport <port>
The TCP <port> number to use for the ftp connection on
the proxy ftp server instead of the default port. This
option may also be specified by configuring the macro
_ftpport.
RPM allows the following options to be used with http URLs:
--httpproxy <hostname>
The host <hostname> will be used as a proxy server for
all http transfers. This option may also be specified
by configuring the macro _httpproxy.
--httpport <port>
The TCP <port> number to use for the http connection
on the proxy http server instead of the default port.
This option may also be specified by configuring the
macro _httpport.
FILES
/usr/lib/rpm/rpmrc
Page 13 (printed 11/20/99)
rpm(8) Red Hat Software (22 December 1998) rpm(8)
/etc/rpmrc
~/.rpmrc
/usr/lib/rpm/macros
/etc/rpm/macros
~/.rpmmacros
/var/lib/rpm/conflictsindex.rpm
/var/lib/rpm/fileindex.rpm
/var/lib/rpm/groupindex.rpm
/var/lib/rpm/nameindex.rpm
/var/lib/rpm/packages.rpm
/var/lib/rpm/providesindex.rpm
/var/lib/rpm/requiredby.rpm
/var/lib/rpm/triggerindex.rpm
/tmp/rpm*
SEE ALSO
glint(8), rpm2cpio(8), http://www.rpm.org/
AUTHORS
Marc Ewing <marc@redhat.com>
Jeff Johnson <jbj@redhat.com>
Erik Troan <ewt@redhat.com>
Page 14 (printed 11/20/99)