mge-utalk(8) Network UPS Tools (NUT) mge-utalk(8)NAMEmge-utalk - Driver for MGE UPS UTALK protocol hardware
NOTE
This man page only documents the hardware-specific fea-
tures of the mge-utalk driver. For information about the
core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
Pulsar Evolution (Serial), Pulsar ESV+, Pulsar EX, Pulsar
ES+, Pulsar EXtreme C, Pulsar / Comet EXtreme, Comet /
Galaxy (Serial)
EXTRA ARGUMENTS
This driver supports the following optional settings in
the ups.conf(5):
LowBatt=value
Low battery level, in % (default 30%)
OnDelay=value
Set delay before startup, in minutes (default 1
minute)
OffDelay=value
Delay before shutdown, in seconds (default 120 sec-
onds)
AUTHORS
Hans Ekkehard Plesser, Dave Abbott, Arnaud Quette,
Nicholas Reilly, Marek Kralewski
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page:
http://www.exploits.org/nut/
NUT mailing list archives and information:
http://lists.exploits.org/
Wed Oct 16 2002 mge-utalk(8)