jgraph(1)jgraph(1)NAMEjgraph - filter for graph plotting to postscript
SYNTAXjgraph [-p] [-P] [-L] [-comments] [filename ...]
DESCRIPTION
Jgraph takes the description of a graph or graphs and produces a post‐
script file on the standard output. Jgraph is ideal for plotting any
mixture of scatter point graphs, line graphs, and/or bar graphs, and
embedding the output into LaTeX, or any other text processing system
which can read postscript.
Jgraph reads its input from the specified files. If no files are spec‐
ified, then it reads from standard input.
The graph description language is simple enough to get nice looking
graphs with a minimum of effort, yet powerful enough to give the user
the flexibility to tailor the appearance of the graph to his or her
individual preferences. This includes plotting multiple graphs and
laying them out separately on the page (or pages).
As an example, if the user wanted to simply plot the points (2,3),
(4,5), (1,6), the following would be enough of a specification file:
newgraph
newcurve pts 2 3 4 5 1 6
Now, if the user wanted to spruce the graph up by adding labels to the
axes, connecting the points, and titling the graph, then the input
could change to:
newgraph
newcurve pts 2 3 4 5 1 6 linetype solid
xaxis label : X axis
yaxis label : Y axis
title : This is an example graph
If the user instead wanted this to be a bar graph with different end‐
points on the axes, he/she could simply change the input to:
newgraph
xaxis min 0 max 5 label : X axis
yaxis min 0 max 6 label : Y axis
newcurve pts 2 3 4 5 1 6 marktype xbar
title : This is an example bar graph
There are many more features of the description language, which are
described below in the next section. Features which are not embedded
within the description language are: line and function interpolation,
function plotting, and pie graphs. The latter is impossible to do with
the aid of jgraph, however, the others can be effected with jgraph
mixed with awk or c. See FUNCTION PLOTTING AND OTHER NON-INHERENT FEA‐
TURES below.
Also below is a section HINTS AND EXAMPLE GRAPHS, which may give good
ideas on how to use jgraph more effectively.
OPTIONS-P The -P option produces postscript which can be piped directly to
lpr, which can be displayed in an Xwindows environment with gs
(ghostscript). Without this option, the output should be embed‐
ded within LaTeX or a similar text processing system.
-L The -L option produces a landscape plot.
-p The -p option re-prints the input on the standard output, only
with all the defaults made explicit. This is useful for letting
the user do his/her own special formatting, as it shows the
explicit values that the defaults assume, so that they can be
manipulated.
-comments
This option makes jgraph put comments into the output post‐
script. These make it easier for the user to wade through the
final postscript if necessary.
THE DESCRIPTION LANGUAGE
The description language is essentially keywords followed by
attributes. All keywords and attributes except for string attributes
are tokens -- non-white-space characters surrounded by white-space.
Special tokens are ``(*'', ``*)'', ``include'', ``:'', and ``shell'',
which denote comments, include-file statements, string identifiers, and
shell-include statements:
Comments
Comments are surrounded by the tokens ``(*'' ``*)'' as in Mod‐
ula-2 (except that here, the tokens must be surrounded by white-
space). Comments may be nested. If the comment runs to the end
of a file, the last ``*)'' may be omitted.
Include-file statements
The token following an ``include'' token is expected to be a
file name. The result of the statement is to include the con‐
tents of the file at that point. Include-file statments can be
nested within included files, and within shell includes.
Strings
In places where strings are required (as in graph and curve
labels), they are denoted by the token ``:''. The second char‐
acter after the ``:'' starts the string, and the next newline
character terminates it. Thus, the string ``Graph #1'' can be
denoted as:
: Graph #1<newline>
or
:<newline>
Graph #1<newline>
One can get multiline strings by making a backslash the last
character before the newline on all but the last line. Notice
that in strings white-space is not ignored. This way of denot‐
ing strings allows the user to embed leading and trailing spa‐
ces, as well as the null string. For example, the null string
``'' is represented by:
: <newline>
Once a string has been started, it may contain any character.
Specifically, it may contain the sequence ``(*'', ``shell'', or
``include'' without starting a comment or including a file.
Each line of a string must contain less than 1000 characters.
Otherwise string sizes are limited only by the size of memory.
Shell-include statements
Shell include statements are of the form ``shell'', ``:'', and
then a string. The result of the statement is that the string
is executed (using popen, which passes the string to sh), and
the standard output is included at that point. Shell-includes
can be freely nested within include-files and other shell-
includes. Shell commands may be more than one line, but must
not exceed 1000 characters. The shell statement is not (yet)
available on VMS.
Notation
In the descriptions below:
tk {integer}
means that token tk must be followed by an integer.
tk [integer]
means that tk may be followed by an integer, but doesn't
have to. In most cases, if tk is not followed by an
integer, then the command denoted by tk is ignored.
tk [{integer} {integer}]*
means that tk must be followed by an even number of inte‐
gers.
Supported types other than integer are: {float} for floating
point entries, {token} for any token, and {string} for a string
as defined above.
TOP-LEVEL DESCRIPTION COMMANDS
newgraph
This starts editing a new graph (see GRAPH EDITING COM‐
MANDS). Note that multiple graphs may be drawn on the
same page.
graph {integer}
This edits the graph denoted by {integer}. If the graph
doesn't exist, then this command creates it and starts
editing it. Newgraph is simply an abbreviation for graph
n where n=0 if this is the first graph, otherwise n=m+1,
where m is the largest number of any graph so far.
copygraph [integer]
This creates a new graph, and copies all the attributes
from the graph [integer]'s x and y axes, as well as its
x_translate and y_translate values, the clipping, the
legend defaults, and the title defaults. If the [inte‐
ger] is omitted, then it copies its values from the
``previous'' graph, which is defined to be the graph with
the largest number less than the currrent graph's number.
If the current graph has the smallest number, then it
will take the last graph from the previous page of
graphs. If there is no previous page, then an error will
be flagged. (copygraph does not copy the values of the
hash_at, mhash_at, and hash_label attributes).
newpage
This command is for plotting graphs on multiple pages.
After a newpage, the graphs that the user enters will be
plotted on a new page. New graphs and strings will be
numbered starting with 0. Essentially, newpage is the
same as appending together the output of separate calls
of jgraph on the text before the newpage, and on the text
after the newpage. Newpage will most likely produce
bizarre results if the -P option is not specified.
X [float]
Y [float]
Postscript files to be embedded in LaTeX (and some other
programs) contain a ``bounding box'' which defines the
area which LaTeX will allocate for the postscript. Other
programs use this bounding box as well, sometimes using
it to define where to clip the postscript image. Jgraph
uses the axis lines and labels, and the title to generate
its bounding box. Most of the time that's good enough to
work in LaTeX. The Y and X commands say to make the
height and width of the bounding box at least Y and X
inches, respectively, but to maintain the current center‐
ing of the graph. If you still need further control over
the bounding box (e.g. to change the centering), try the
bbox command. If there's more than one page in the
jgraph file, Y, X and bbox values can be given for each
graph.
bbox float float float float
If the Y and X commands aren't enough to help you define
a good bounding box, this command lets you explicitly
enter one which will go directly into the jgraph output.
Its units are the final postscript units. It's probably
best to use the -p option to see what the bounding box is
that jgraph produces, and then alter that accordingly
with bbox. The main use for this is to change the auto‐
matic centering that jgraph performs: Usually the center
of the bounding box that jgraph computes is put at the
center of the page. Changing the bbox changes this cen‐
ter.
preamble : {string}
preamble {token}
epilogue : {string}
epilogue {token}
These two commands allow the user to include strings or
files (the token specifies the filename) which will be
copied directly into jgraph's output. The preamble is
included at the beginning of the output (after some ini‐
tial postscript to set things up for jgraph), and the
epilogue is included at the end. A good use for the pre‐
amble is to set up a postscript dictionary if you're
using postscript marks.
GRAPH EDITING COMMANDS
These commands act on the current graph. Graph editing is ter‐
minated when one of the top-level description commands is given.
xaxis
yaxis Edit the x or y axis (see AXIS EDITING COMMANDS)
newcurve
This starts editing a new curve of the graph (see CURVE
EDITING COMMANDS).
curve {integer}
This edits the curve denoted by {integer}. If the curve
doesn't exist, then this command creates it and starts
editing it. Newcurve and curve interact as newgraph and
graph do.
newline
This is an abbreviation for:
newcurve marktype none linetype solid
copycurve [integer]
This starts editing a new curve of the graph, and copies
all its values except for the points from curve [inte‐
ger.] If the [integer] is omitted, then it copies its
values from the last curve in this graph. If this graph
currently has no curves, then it searches backwards from
the previous graph.
title This edits the title of the graph (see LABEL EDITING COM‐
MANDS). The title is given a default location centered
beneath the graph, and a default font size of 12, how‐
ever, as with all labels, this can be changed.
legend The edits the legend of the graph (see LEGEND EDITING
COMMANDS). As a default, the graph will contain a legend
if any of its curves have labels.
newstring
This edits a new text string (see LABEL EDITING COM‐
MANDS). This is useful as it allows the user to plot
text on the graph as well as curves.
string {integer}
copystring [integer]
String and copystring are to newstring as curve and copy‐
curve are to newcurve.
border
noborder
Border draws a square border around the area defined by
the axes. Noborder specifies no border. Noborder is the
default.
clip
noclip Clip specifies that all curves in the graph will be
clipped -- that is, no points outside of the of axes will
be plotted. Clipping can also be specified on a per-
curve basis. The default is noclip.
inherit_axes
This is an old command which is kept for backward compat‐
ibility. Copycurve. is equivalent to:
newgraph inherit_axes
x_translate [float]
y_translate [float]
By default, the bottom left-hand corner of each graph is
at point (0,0) (final postscript units). X_translate and
Y_translate translate the bottom left-hand corner of the
graph [float] inches. The main use of this is to draw
more than one graph on a page. Note that jgraph consid‐
ers all the graphs drawn on the page when it computes its
bounding box for centering. Thus, if only one graph is
drawn, it will always be centered on the page, regardless
of its X_translate and Y_translate values. These values
are used for relative placement of the graphs.
To change the centering of the graphs, use bbox.
X [float]
Y [float]
These are the same as X and Y in the Top-level commands,
except that they let the user continue editing the cur‐
rent graph.
SIMPLE AXIS EDITING COMMANDS
These commands act on the current axis as chosen by xaxis or
yaxis (see GRAPH EDITING COMMANDS). Axis editing terminates
when a graph or top-level command is given. There are more
advanced axis editing commands given below which have to do with
moving the hash marks, adding new hash marks and labels, etc.
See ADVANCED AXIS EDITING COMMANDS.
linear
log Set the axis to be linear or logarithmic. The default is
linear. If the axis is set to be logarithmic, then val‐
ues <= 0.0 will be disallowed, as they are at negative
infinity on the axis.
min [float]
max [float]
Set the minimum and maximum values of this axis.
Defaults depend on the points given. They can be seen by
using the -p option. Unless stated, all units (for exam‐
ple point plotting, string plotting, etc.) will be in
terms of the min and max values of the x and y axes.
size [float]
Set the size of this axis in inches.
log_base [float]
Set the base of the logarithmic axis. Default = 10. This
is the value which determines which hash marks and hash
labels are automatically produced.
hash [float]
Hash marks will be [float] units apart. Default = -1.
If this value equals 0, then there will be no hash marks.
If this value is less than 0, then the hash marks will be
automatically set by jgraph (see -p for the value). By
default, each hash mark will be labeled with its value.
Hash and shash are ignored if the axes are logarithmic.
shash [float]
Make sure there is a hash mark at the point [float] along
the axis. The default is set by jgraph if hash = -1. If
hash is set by the user, shash is defaulted to the min
value of the axis.
mhash [integer]
Put [integer] minor hash marks between the above hash
marks. Default = -1. If this value equals 0, then there
will be no minor hash marks. If this value is negative,
then the value will be chosen by jgraph (see -p for the
value).
precision [integer]
hash_format token
These control how jgraph formats the automatic hash
labels. The user shouldn't have to worry about these
values, except in extreme cases. Jgraph uses printf to
format the labels. If hash_format is ``f'' (the
default), then the value of a hash label is printed with
printf("%.*f", precision, value).
Other valid hash_format values are ``G'', ``g'', ``E'', and
``e''. ``G'' is a good generic format which converts to scien‐
tific notation if the value becomes too big or too small. If
the precision is negative, then jgraph chooses a default: For
``g'' and ``G'', the default is 6. For ``e'' and ``E'', the
default is 0, and for ``f'', jgraph tries to determine a reason‐
able default. Please read the man page of printf(1) for a com‐
plete description of how it formats floating point numbers.
label Edit the label of this axis (see LABEL EDITING COMMANDS).
By default, the label is in font ``Times-Bold'', and has
a font size of 10. If the user doesn't change any of the
plotting attributes of the label, jgraph chooses an
appropriate place for the axis label.
draw_at [float]
Draw the axis line at this point on the other axis. The
default is usually the other axis's min, however if
hash_scale is positive (see hash_scale under ADVANCED
AXIS EDITING), it will be the other axis's max.
nodraw Do not draw the axis, the hash marks or any labels. This
is useful for plotting points with no axes, and for over‐
laying graphs on top of one another with no clashes.
This is equivalent to no_draw_axis, no_draw_axis_label,
no_draw_hash_marks, and no_draw_hash_labels.
draw Cancels the effect of nodraw. Default = draw. This is
equivalent to draw_axis, draw_axis_label,
draw_hash_marks, and draw_hash_labels.
grid_lines
no_grid_lines
Grid_lines specifies to plot a grid line at each major
hash mark on this axis. The default is no_grid_lines.
mgrid_lines
no_mgrid_lines
Mgrid_lines specifies to plot a grid line at each minor
hash mark on this axis. The default is no_mgrid_lines.
CURVE EDITING COMMANDS
These commands act on the current curve as chosen by newcurve or
curve (see GRAPH EDITING COMMANDS). Curve editing terminates
when a graph or top-level command is given.
pts [{float} {float}]*
This sets the points to plot in this curve. The first
float is the x value, and the second float is the y value
of the point. Points are plotted in the order specified.
This command stops reading points when a non-float is
given. The user can specify this command multiple times
within a curve -- each time, simply more points are added
to the curve.
x_epts [{float} {float} {float} {float}]*
y_epts [{float} {float} {float} {float}]*
This allows the user to specify points and ``confidence
values'' (otherwise known as ``error bars''). The first
two floats specify the x and y values of the point, as
above. If x_epts is specified, then the second two
floats specify range or confidence values for the x value
of the point. Error bars will be printed to each of
these x values (using the original point's y value) from
the original point. Similarly, y_epts specifies range or
confidence values for the y value of the point. pts
x_epts and y_epts can all be intermixed.
marktype
This sets the kind of mark that is plotted for this
curve. Valid marks are: circle, box, diamond, triangle,
x, cross, ellipse, xbar, ybar, text, postscript, eps,
none, and variants of general. Most of these are self-
explanatory, except for the last few:
Xbar makes the curve into a bar graph with the bars
going to the x axis. Ybar has the bars going to the y
axis.
Text lets the user plot text instead of a mark. The
text is editted as a label (see LABEL EDITING COMMANDS)
immediately following the text command. The x and y
fields of the label have special meanings here: They
define where the label is to be printed in relation to
the curve points. For example, if they are both 0, the
label will be printed directly on the curve points. If x
is 1.0 and y is -1.0, then the label will be printed one
unit to the right and one unit below the curve points
(units are units of the x and y axes). Default label
values are 0 for x and y, and center justification.
Postscript: See the postscript token below.
Eps: See the eps token below.
None means that no mark will be plotted (this is useful
for drawing lines).
There are four types of general marks, which work using
the gmarks command described below. The four marktypes
are general, general_nf, general_bez, and general_bez_nf.
By default, a new mark is chosen for each curve.
marksize [float] [float]
This sets the size of the mark. The first [float] is the
width of the mark, and the second is the height. Units
are those of the x and y axes respectively, unless that
axis is logarithmic, in which case the units are inches.
Negative marksizes are allowed (e.g. a negative height
will flip a triangle mark). The default mark size can be
determined using the -p option of jgraph
mrotate [float]
This allows the user to rotate the mark [float] degrees.
Default is zero.
gray [float]
color [float float float]
These specify either the grayness of the curve or its
color. Values for gray should be from 0 (black) to 1
(white). Values for color should also be from 0 to 1.
They are RGB values, and thus define the amount of red,
green and blue in the curve respectively. Specifying
color nullifies the gray value, and vice versa. The
default is gray 0
fill [float]
cfill [float float float]
This sets the filling of marks which define an area to
fill (e.g. box, circle, xbar). fill defines a gray
value, and cfill defines a color value (see gray and
color above for a description of the units). The default
is fill 0 (black).
pattern token [float]
This defines the how the mark is to be filled. Token may
be solid (the default), stripe, or estripe. If solid,
then the float is ignored, and the mark is completely
filled in with either the gray value defined by fill or
the color value defined by cfill. If stripe, then the
mark will be filled with stripes of either the gray value
defined by fill or the color defined by cfill. The
stripes will be rotated by float degrees. Estripe dif‐
fers from stripe only in that stripe draws stripes on a
white background, while estripe simply draws the stripes
on an empty background.
poly
nopoly
pfill [float]
pcfill [float float float]
ppattern token [float]
Poly allows the user to make jgraph treat the curve as a
closed polygon (or in the case of a bezier, a closed
bezier curve). pfill, pcfill and ppattern specify the
filling of the polygon, and work like fill, cfill and
pattern above. The default is nopoly.
gmarks [{float} {float}]*
Gmarks is a way for the user to define custom marks. For
each mark on (x,y), Each pair of {float_x}, {float_y},
will define a point on the mark (x + (float_x * mark‐
size_x / 2), y + (float_y * marksize_y / 2)).
Thus, for example, the box mark could be defined as
gmarks -1 -1 -1 1 1 1 1 -1
marktype general
The marktypes general, general_nf, general_bez, and gen‐
eral_bez_nf, allow the gmarks points to define a closed polygon,
a line, a closed bezier curve and a regular bezier curve respec‐
tively (the ``nf'' stands for ``non-filled'').
postscript : {string}
postscript {token}
This allows the user to enter direct postscript as a
mark. It automatically sets the marktype to postscript.
If a string is entered, then that string is used as the
mark in the jgraph output. If a token is entered, then
that token must stand for a filename, which will be
copied to the output once for every mark. The postscript
will be set up so that when the string or file is put to
the output, (0, 0) of the the axes is in the middle of
the mark, it is rotated by mrotate degrees, and scaled by
(marksize_x / 2), marksize_y / 2). Thus, the box mark
could be defined as:
postscript : 1 setlinewidth -1 -1 moveto -1 1 lineto \
1 1 lineto 1 -1 lineto -1 -1 lineto stroke
If the marksize_x is defined to be (0, 0), then jgraph does no
scaling. This is useful when the postscript has strings, and
the user does not want the strings to be scaled.
eps {token}
This allows the user to include an encapsulated post‐
script file and treat it as a mark. It automatically
sets the marktype to eps. The file will be scaled so
that the bounding box is marksize units. Among other
things, this allows the user to include whole jgraph
files as marks. Please see ad.jgr, explained in HINTS
AND EXAMPLE GRAPHS below for an example of this feature.
larrows
rarrows
nolarrows
norarrows
Rarrows specifies to draw an arrow at the end of every
line segment in the curve. Larrows specifies to draw an
arrow at the beginning of every line segment. The size
of the arrows can be changed by using asize. The default
is nolarrows and norarrows.
Arrows always go exactly to the point specified, with
the exception of when the marktype is ``circle''. In
this case, the arrow goes to the edge of the circle.
larrow
rarrow
nolarrow
norarrow
This is analgous to the above, except that with larrow,
the only arrow drawn is to the beginning of the first
segment in the curve, and with rarrow, the only arrow
drawn is to the end of the last segment.
asize [float] [float]
This sets the size of the arrows. The first [float] con‐
trols the arrow's width. Its units are those of the x-
axis. The second [float] controls the arrow's height.
It is in the units of the y-axis. Use the -p option of
jgraph to see the default values.
afill [float]
afill [float]
apattern token [float]
These control the grayness or color of arrowheads.
Afill, acfill and apattern work in the same way as fill,
cfill and pattern described above. The default is afill
0 (black).
linetype [token]
This defines the type of the line connecting the points.
Valid entries are solid, dotted, dashed, longdash, dot‐
dash, dotdotdash, dotdotdashdash, general, and none. The
default is none. General lets the user define his own
linetype using the glines command described below.
Points are connected in the order in which they are
inserted using the pts command.
glines [float]*
This lets the user specify the exact dashing of a line.
The format is as in postscript -- the first number is the
length of the first dash, the second is the length of the
space after the first dash, etc. For example, dotdash
could be defined as ``glines 5 3 1 3''.
linethickness [float]
This defines the line thickness (in absolute postscript
units) of the connecting line. Default = 1.0.
bezier
nobezier
Bezier specifies to use the curve's points to define suc‐
cessive bezier curves. The first point is the starting
point. The next two are control points for the bezier
curve and the next point is the ending point. If there
is another bezier, this ending point is also the begin‐
ning point of the next curve. The next two points are
again control points, and the next point is the ending
point. Thus, a bezier must have a total of (3n + 1)
points, where n is at least 1.
In bezier curves, marks and arrows only apply to every
third point. Nobezier is the default.
clip This specifies that this curve will be clipped -- that
is, no points outside of the of axes will be plotted.
noclip This turns off clipping. If clipping was specified for
the entire graph, then noclip has no effect. Noclip is
the default.
label This edits the label of this curve for the purposed of
drawing a legend. (see LABEL EDITING COMMANDS and LEGEND
EDITING COMMANDS). Unless the legend entry is custom,
setting any label attribute except for the text itself
will have no effect.
LABEL EDITING COMMANDS
The following commands are used for editing labels. Unless
stated otherwise, the defaults are written with each command.
Label editing terminates when one of these tokens is not given.
: {string}
This sets the string of the label. If no string is set,
the label will not be printed.
x [float]
y [float]
This sets the x or y coordinate of the label. Units are
the units of the x and y axes respectively.
font [token]
This sets the font. Default is usually ``Times-Roman''.
fontsize [float]
This sets the fontsize in points. Default is usually 9.
linesep [float]
This sets the distance between lines in multilined
labels. Units are points. The default is the fontsize.
hjl
hjc
hjr These set the horizontal justification to left, center,
and right, respectively. Default = hjc.
vjt
vjc
vjb These set the vertical justification to top center, and
bottom, respectively. Default = vjb.
rotate [float]
This will rotate the string [float] degrees. The point
of rotation is defined by the vj and hj commands. For
example, to rotate 90 degrees about the center of a
string, one would use vjc hjc rotate 90.
lgray [float]
lcolor [float float float]
These control the color or the grayness of the label. It
works just as gray and color do for curves and axes. The
default depends on the context. For example, for strings
and the title, the default is black. For axis labels and
hash labels, the default is the color of the axis. For
text as marks, the default is the curve color.
LEGEND EDITING COMMANDS
These commands allow the user to alter the appearance of the
legend. Legends are printed out for each curve having a non-
null label. The legend entries are printed out in the order of
ascending curve numbers. Legend editing terminates when a graph
command or top level command is issued.
In earlier versions of jgraph (before version 8.0), the charac‐
teristics of each legend entry were set in the label portion of
the entry's curve. Thus, for example, if you wanted each
entry's fontsize to be 18, you had to set it in each entry's
curve. Now, default legend entry characteristics are set using
the defaults keyword. Unless a custom legend is specified,
these default values override any values set in the entry's
curve. Thus, to get all entries to have a fontsize of 18, it
must be set using defaults fontsize 18.
If legend editing seems cryptic, try the following example:
newgraph
newcurve marktype box linetype solid label : Solid box
pts 0 0 1 1 2 1 3 1
newcurve marktype circle linetype dotted label : Dotted circle
pts 0 1 1 2 2 2 3 2
newcurve marktype x linetype dashed label : Dashed x
pts 0 2 1 3 2 3 3 3
legend defaults
font Times-Italic fontsize 14 x 1.5 y 3.5 hjc vjb
The legend of this graph should be centered over the top of the graph,
and all legend entries should be 14pt Times-Italic.
on
off These turn printing of the legend on and off. The
default is on (but, of course, if there are no curve
labels defined, there will be no legend).
linelength [float]
This sets the length of the line printed in front of leg‐
end entries corresponding to curves which have lines.
Units are those of the x axis, unless the x axis is loga‐
rithmic, in which case the units are inches. The default
may be gotten using the -p option.
linebreak [float]
This sets the vertical distance between individual legend
entries. Units are those of the y axis, unless the y
axis is logarithmic, in which case the units are inches.
The default may be gotten using the -p option.
midspace [float]
This sets one of two things. If any of the legend
entries have lines in them, then this sets the distance
between the end of the line and the legend entry text.
Otherwise, this sets the distance between center of the
mark and the legend entry text. Units are those of the x
axis, unless the x axis is logarithmic, in which case the
units are inches. The default may be gotten using the -p
option.
defaults
This lets the user change the attributes of all legend
entries. The defaults are editted as a label (see LABEL
EDITING COMMANDS). A few of the label fields have spe‐
cial meanings: The : field is ignored. The x and y
fields define where the label will be printed. The hj
and vj fields define the justification of the legend
about the x and y point. Thus, if x is 10 and y is 15,
and hjc vjb are specified, then the legend will be cen‐
tered horizontally about x=10, and the bottom of the leg‐
end will be placed on y=15. This is analagous to label
plotting. The rotate field is also analagous to label
plotting.
Defaults are as follows. Rotate is 0. font is ``Times-
Roman'' and fontsize is 9. The color is black. Default
justification is hjl and vjc. The default x and y values
are set according to the hj and vj fields. See the -p
option.
left
right These will automatically produce a legend to the left or
the right of the graph. Left is equivalent to defaults
hjr vjc and right is equivalent to defaults hjl vjc.
top
bottom These will automatically produce a legend on the top or
the bottom of the graph. Top is equivalent to defaults
hjl vjb
and bottom is equivalent to defaults hjl vjt.
x [float]
y [float]
These are included mainly for backward compatability to
earlier versions of jgraph. Setting x and y is equiva‐
lent to ``defaults x float y float hjl vjt''
custom This lets the user control where each individual legend
entry goes. The values of the defaults fields are
ignored, and instead, the values of the curve's labels
are used. All justifications have defined results,
except for hjc. Similarly, rotation other than 0 is
likely to produce bad effects.
ADVANCED AXIS EDITING
These are more advanced commands for editing an axis. This
includes drawing explicit hash marks and labels, moving the hash
marks, axes, and labels, not drawing the hash marks, labels,
axes, etc.
gray [float]
color [float float float]
These specify either the grayness of the axis or its
color. Values for gray should be from 0 (black) to 1
(white). Values for color should also be from 0 to 1.
They are RGB values, and thus define the amount of red,
green and blue in the axis respectively. Specifying
color nullifies the gray value, and vice versa. The
default is gray 0. These values affect every part of the
axis: the label, the hash marks and labels, the axis
line and the grid lines.
grid_gray [float]
grid_color [float float float]
mgrid_gray [float]
mgrid_color [float float float]
These allow the user to define the grayness or color of
the gridlines and the mgridlines to be different from
those of the axis lines. The default grid_gray and
grid_color is the same as the axis's gray and color. The
default mgrid_gray and mgrid_color is the same as
grid_gray and grid_color.
hash_at [float]
Draw a hash mark at this point. No label is made for
this hash mark.
mhash_at [float]
Draw a minor hash mark at this point.
hash_label
Edit a hash label (see HASH LABEL EDITING COMMANDS).
hash_labels
Edit the default characteristics of the hash labels.
This is so that the user can change the fontsize, justi‐
fication, etc., of the hash labels. Editing hash_labels
is just like editing normal labels (see LABEL EDITING
COMMANDS), except that the :, x, and y values are all
ignored. Defaults for hash labels are as follows: Font‐
size=9, Font=``Times-Roman'', Justification is dependent
on whether it is the x or y axis and whether hash_scale
is positive or negative.
hash_scale [float]
This is to change the size and orientation of the hash
marks. Default = -1.0. Changing this to -2.0 will dou‐
ble the length of the hash marks. Changing this to +1.0
will make the hash marks come above or to the right of
the axis.
draw_hash_marks_at [float]
By default, the hash marks are drawn either above or
below the axis. This command changes where they are
drawn. Hash_scale still determines whether they are
drawn above or below this point, and their size.
draw_hash_labels_at [float]
By default, the hash labels are drawn either above or
below the hash marks (again, this is dependent on
hash_scale). This command changes where they are drawn.
Justification and fontsize, etc., can be changed with the
hash_labels command.
auto_hash_marks
no_auto_hash_marks
This toggles whether or not jgraph will automatically
create hash marks according to hash, mhash and shash (or
log_base and mhash for logarithmic axes). The default is
auto_hash_marks.
auto_hash_labels
no_auto_hash_labels
This toggles whether or not jgraph will automatically
create hash labels for the auto_hash_marks. Default =
auto_hash_labels.
draw_axis
no_draw_axis
This toggles whether or not the axis line is drawn.
Default = draw_axis.
draw_axis_label
no_draw_axis_label
This toggles whether or not the axis label (as editted by
the label command) is drawn. Default = draw_axis_label.
draw_hash_marks
no_draw_hash_marks
This toggles whether or not the hash marks (both auto‐
matic and those created with hash_at and mhash_at) are
drawn. Default = draw_hash_marks.
draw_hash_labels
no_draw_hash_labels
This toggles whether or not the hash labels are drawn.
Default = draw_hash_labels.
HASH LABEL EDITING COMMANDS
Hash labels are simply strings printed along the appropriate
axis. As a default, they are printed at the place denoted by
the most recent hash_at or mhash_at for this axis, but this can
be changed by the at command. If there has been no hash_at or
mhash_at, then an at command must be given, or there will be an
error. Hash editing terminates when either one of these com‐
mands is not given.
: {string}
This sets the string of the hash label (see Strings above
under THE DESCRIPTION LANGUAGE).
at [float]
This sets the location of the hash label along the cur‐
rent axis.
FUNCTION PLOTTING AND OTHER NON-INHERENT FEATURES
Although jgraph doesn't have any built-in functions for interpolation
or function plotting, both can be effected in jgraph with a little out‐
side help:
Function plotting
With the include and shell statement, it's easy to create a file
of points of a function with a c or awk program, and include it
into a graph. See the section HINTS AND EXAMPLE GRAPHS for an
example of a sin graph produced in this manner.
Point interpolation
Point interpolation is essentially the same as function plot‐
ting, and therefore is left out of jgraph. The UNIX spline(1)
routine is a simple way to get interpolation between points.
See bailey.jgr described below. Maybe in a future release.
HINTS AND EXAMPLE GRAPHS
Jgraph should be able to draw any kind of scatter/line/bar graph that a
user desires. To embellish the graph with extra text, axes, lines,
etc., it is helpful to use copygraph. The following example graphs
show a few examples of different features of jgraph. They should be in
the directory JGRAPH_DIR.
- acc.jgr is a simple bar graph. Acc.tex is also included to show how
one can include the output of jgraph in a LaTeX file. To get this to
work, you might have to substitute the entire pathname of the file
acc.jps in the acc.tex file.
- g8.jgr is a simple graph with some plotted text. - g8col.jgr shows
how to produce a color background -- it is
the same as g8.jgr only all on a yellow background. - ebars.jgr is a
simple graph with error bars. - sin.jgr shows how a sin function can
be plotted using a simple c program to produce the sin wave. Moreover,
this file shows a use of copygraph to plot an extra x and y axis at the
0 point.
- sin1.jgr is a further extension of sin.jgr only with one x and y axis
at 0, but with the axis labels at the left and the bottom of the graph.
- sin2.jgr is a different sin wave with a logarithmic x axis.
- sin3.jgr shows how a bizarre effect can be gotten by sorting the
points in a different manner.
- bailey.jgr shows how to use the UNIX spline(1) routine to get inter‐
polation between points.
- gpaper.jgr shows how you can get jgraph to easily produce graph
paper.
- g9n10.jgr contains two graphs with complicated legends. It contains
a description of how the legend was created.
- ex1.jgr and ex2.jgr are two examples which were figures 1 and two in
an extended abstract for a paper about jgraph.
- mab2.jgr is a graph created by Matt Blaze which shows how a compli‐
cated output graph can be quite concisely and simply stated. In this
graph, the x axis is a time line. It shows usage of the hash_label and
hash_labels commands, as well as displaying how jgraph lets you extract
data from output files with awk.
- nr.jgr is an example of a rather complicated bar graph with stripe-
filled bars. It was created by Norman Ramsey.
- hypercube.jgr shows an interesting use of jgraph for picture-drawing.
- ad.jgr is an example which shows how one can include jgraph output as
jgraph input. The file uses the eps token to include cube.jgr, a
jgraph drawing of an Intel hypercube, and disk.jgr, a jgraph drawing of
a disk, in a picture.
- alb.jgr is another use of jgraph for picture drawing. This file was
created by an awk script which Adam Buchsbaum wrote to draw trees and
graphs.
- wortman.jgr is a neat graph of processor utilization written by Dave
Wortman for SIGPLAN '92. It was created by an awk script, which pro‐
cessed the data and emitted the jgraph.
To view these graphs, use jgraph-P, and view the resulting output file
with gs, or a similar postscript viewer. To make a hard copy of these
graphs, pipe the output of jgraph-P directly to lpr.
USING JGRAPH TO DRAW PICTURES
As hypercube.jgr and alb.jgr show, jgraph can be used as a postscript
preprocessor to make drawings. There are two advantages using jgraph
to draw pictures instead of using standard drawing tools like xfig,
figtool, or idraw. The first is that with jgraph, you know exactly
where strings, lines, boxes, etc, will end up, because you plot them
explicitly. The second advantage is that for iterative drawings, with
lots of patters, you can combine jgraph with awk or c or any other pro‐
gramming language to get complex output in a simple way. Most what-
you-see-is-what-you-get (WYSIWYG) drawing tools cannot do this.
The major disadvantage of using jgraph to draw pictures is that jgraph
is not WYSIWYG. You have to set up axes and plot points, lines and
strings. It's all a matter of taste.
If you'd like to see some more complex pictures drawn with jgraph, as
well as some hints to make picture-drawing easier, send me email
(jsp@princeton.edu).
EMBEDDING THE OUTPUT IN LATEX
I haven't read the manuals, but the way I've been loading these files
into LaTeX has been as follows:
1. Toward the beginning of my LaTeX file, I've had ``\input{psfig}''
2. Where I've wanted my file, I've put:
\begin{figure}
\centerline{\psfig{figure=<path-name>/<filename-of-jgraph-output>}}
\end{figure}
Some versions of dvips or dvi2ps work without the path-name. Others
require that the path-name be present.
3. After running latex on the file, do
lpr -d file.dvi
4. If that doesn't work, try dvips-ing the file and printing the postscript.
BUGS
Logarithmic axes cannot contain points <= 0. If I have enough com‐
plaints to convince me that this is a bug, I'll try to fix it.
There is no real way to make the axes such that they decrease from left
to right or low to high -- or at least not without writing your own
hash labels.
There may well be loads of other bugs. Send to jsp@princeton.edu.
This is $Revision: 8.3 $.
jgraph(1)