CDI_GET_CONFIG(8)CDI_GET_CONFIG(8)NAMEcdi_get_config - get configuration information on a tape device
SYNOPSIScdi_get_config-f device [ -v ] [ -t { s | t | g | n | m | i } ]
DESCRIPTION
The cdi_get_config program obtains configuration information on a tape
device. The data output from this command is collected from the SCSI
Mode Sense disconnect/reconnect, data compression and device configura‐
tion pages.
OPERANDS-f device
Specifies the device to obtain configuration information from.
OPTIONS-t Use the -t option to specify the method of tape functions to use
to query the device for configuration information. If the -t
option is not specified, the default method is to use the OS
tape driver SCSI passthrough functions. Please refer to the
libcdi (8) manpage for a complete list of access methods cur‐
rently supported by the cdi_get_config program.
-v Run the program in verbose mode. This option will print out the
version number of the CDI library used by the program.
EXAMPLES
Sample output including drive status information:
% cdi_get_config-f /dev/rmt/2cbn -v
CDI_GET_VERSION returns 1
SCSI config info for via /dev/rmt/2cbn:
active_format 000d
active_partition 00b8
write_full_ratio 0000
read_empty_ratio 007e
write_delay_time c950
flags 000000009cef2080
Parameters Savable
Change Active Format
Data Buffer Recovery
Block Identifiers Supported
Report Setmarks
Stop On Consecutive Filemarks: Stop On 3 Consecutive Filemarks
Recover Buffer Order
Report Early Warning
EOD defined: Reserved (4)
Enable EOD Generation
Sync at Early Warning
Soft Write Protection
buffer_size_early_warning 00b80000
data_compress_algorithm 0000
discon_buffer_full 00ad
discon_buffer_empty 00b8
discon_bus_inactive 007e
discon_time_limit c950
discon_connect_time_limit ef75
discon_max_burst_time 9eb8
compression_algorithm 007ec950
decompression_algorithm ef759eb8
cdi_info.drivestat is:
status = 1, DRIVE_STATUS_NO_ERROR
msg = Drive reports no error - but state is unknown
SEE ALSOlibcdi(8)NetWorker 7.3.2 Aug 23, 06 CDI_GET_CONFIG(8)