DS2404(3) One-Wire File System DS2404(3)NAMEDS2404 - EconoRAM time chip
DS2404S
- Dual port memory plus time
DS1994 - 4k plus time iButton
DS1427 - Time iButton
SYNOPSIS
Real time clock, 4kbit memory. 3-wire interface, too.
04.XXXXXXXXXXXX / alarm | auto | cycle | date | delay | interval | mem‐
ory | pages/page.[0-15|ALL] | readonly/[memory|clock|cycle|interval] |
memory | pages/page.[0-15|ALL] | readonly/[memory|clock|cycle|interval]
| running | set_alarm | start | trigger/[cycle,date,interval,udate,uin‐
terval] | udate | uinterval |
84.XXXXXXXXXXXX / alarm | auto | cycle | date | delay | interval | mem‐
ory | pages/page.[0-15|ALL] | readonly/[memory|clock|cycle|interval] |
running | set_alarm | start | trigger/[cycle,date,interval,udate,uin‐
terval] | udate | uinterval | address | crc8 | id | present | type
FAMILY CODE
04 DS2404 DS1994
84 DS1427 DS2404S
SPECIAL PROPERTIES
alarm
read-write, unsigned integer (0-111)
Alarm state of the DS2404 (3) triggered by time or counter events.
Reading the alarm state clears the alarm.
The alarm value is of the form CIR, where:
C cycle counter alarm
0 no
1 yes
I interval timer alarm
0 no
1 yes
R real-time clock alarm
0 no
1 yes
auto
read-write, yes-no
Flag for mode of interval counter operation. 0=manual 1=auto
See the datasheet for details.
date
read-write, ascii
26 character date representation of the udate value. Increments once
per second while running
Actual internal representation has higher precision.
Cannot be altered if readonly/clock is set.
Setting date to a null string will put the current system time.
Accepted date formats are:
Sat[urday] March 12 12:23:59 2001
Apr[il] 4 9:34:56 2002
3/23/04 23:34:57
current locale setting (your system's format)
delay
read-write, yes-no
Flag for adding a delay to cycle counter. 0=short 1-long
See the datasheet under "IDEL" for details.
interval
read-write, date
Interval timer value, represented as a date string. More typically will
be used as uinterval to read the actual elapsed seconds.
memory
read-write, binary
512 bytes of memory. The readonly/memory flag prevents further change.
pages/page.0 ... pages/page.15 pages/page.ALL
read-write, yes-no
Memory is split into 16 pages of 32 bytes each. The readonly/memory
flag prevents further change. ALL is an aggregate of the pages. Each
page is accessed sequentially.
readonly/[memory|clock|interval|cycle]
read-write, yes-no
Permanently protect part of the chip's function from alteration.
readonly/memory
page.X and memory
readonly/clock
date and udate
readonly/interval
interval
readonly/cycle
cycle
running
read-write, yes-no
State of the clock. 0=off 1=running.
set_alarm
read-write, unsigned integer (0-111)
Which of the alarm triggers are enabled in the DS2404 (3)
The set_alarm value is of the form CIR, where:
C cycle counter alarm
0 no
1 yes
I interval timer alarm
0 no
1 yes
R real-time clock alarm
0 no
1 yes
start
read-write, yes-no
Flag for starting the interval counter operation if not in auto mode.
0=stop 1=start
See the datasheet for details.
trigger/[cycle,date,interval,udate,uinterval]
read-write,varies
Target value that will trigger the alarm if the corresponding set_alarm
field is set.
The format is the same as the similarly named field (i.e. date for
trigger/date )
udate
read-write, unsigned integer
Time represented as a number. udate increments once per second, while
running is on.
Usually set to unix time standard: number of seconds since Jan 1, 1970.
The date field will be the unix representation of udate and setting
either will change the other.
uinterval
read-write, unsigned interval
Similar to the udate field, except corresponds to the interval value.
STANDARD PROPERTIESALARMS
None implemented.
DESCRIPTION
DS1427 DS1994 DS2404 DS2404S
The DS1427 (3), DS1994 (3), DS2404 (3), and DS2404S (3) family of
1-wire devices includes clock functions, with timers, memory, counters
and alarms. It is possible to write-protect regians of memory. Uses
include software or hardware timing and control.
Chips
Both the DS2404 (3) and DS2404S (3) have 1-wire and 3-wire interfaces,
which might be useful for transferring data between the 2 buses. They
act as a passive slave to both busses. The DS2404 (3) and DS2404S (3)
require an external source of power and an external crystal. They also
offer a reset and 1HZ clock pin.
iButtons
Both the DS1427 and DS1994 offer the memory, alarms, and clock function
in iButton format. Because the iButton is a complete sealed package,
battery and crystal are internal. Everything is access via the 1-wire
interface.
ADDRESSINGDATASHEET
http://pdfserv.maxim-ic.com/en/ds/DS2404.pdf
http://pdfserv.maxim-ic.com/en/ds/DS2404S-C01.pdf
http://pdfserv.maxim-ic.com/en/ds/DS1994.pdf
http://pdfserv.maxim-ic.com/en/ds/DS1427.pdf
SEE ALSOAVAILABILITY
http://www.owfs.org
AUTHOR
Paul Alfille (paul.alfille@gmail.com)
OWFS Manpage 2006 DS2404(3)
