Vim Documentation: if_python
*if_python.txt* For Vim version 5.4. Last change: 1999 Jun 07
VIM REFERENCE MANUAL by Paul Moore
The Python Interface to Vim *python*
1. Commands |python-commands|
2. The vim module |python-vim|
3. Buffer objects |python-buffer|
4. Range objects |python-range|
5. Window objects |python-window|
{Vi does not have any of these commands}
The Python interface only works when Vim was compiled with the |+python|
feature.
==============================================================================
1. Commands *python-commands*
*:python* *:py*
:[range]py[thon] {stmt} Execute Python statement {stmt}. {not in Vi}
*:pyfile* *:pyf*
:[range]pyf[ile] {file} Execute the Python script in {file}. {not in Vi}
Both of these commands do essentially the same thing - they execute a piece of
Python code, with the "current range" |python-range| set to the given line
range.
In the case of :python, the code to execute is specified on the command-line.
In the case of :pyfile, the code to execute is the contents of the given file.
Here are some examples *python-examples*
:python from vim import *
:python from string import upper
:python current.line = upper(current.line)
:python print "Hello"
:python str = current.buffer[42]
(Note that changes - like the imports - persist from one command to the next,
just like in the Python interpreter).
==============================================================================
2. The vim module *python-vim*
Python code gets all of its access to vim (with one exception - see
|python-output| below) via the "vim" module. The vim module implements two
methods, three constants, and one error object.
Overview
print "Hello" # displays a message
vim.command(cmd) # execute an ex command
w = vim.windows[n] # gets window "n"
cw = vim.current.window # gets the current window
b = vim.buffers[n] # gets buffer "n"
cb = vim.current.buffer # gets the current buffer
w.height = lines # sets the window height
w.cursor = (row, col) # sets the window cursor position
pos = w.cursor # gets a tuple (row, col)
name = b.name # gets the buffer file name
line = b[n] # gets a line from the buffer
lines = b[n:m] # gets a list of lines
num = len(b) # gets the number of lines
b[n] = str # sets a line in the buffer
b[n:m] = [str1, str2, str3] # sets a number of lines at once
del b[n] # deletes a line
del b[n:m] # deletes a number of lines
Methods
vim.command(str) *python-command*
Executes the vim (ex-mode) command str. Returns None.
Examples:
vim.command("set tw=72")
vim.command("%s/aaa/bbb/g")
To execute normal-mode commands, the following definition could be
used:
def normal(str):
vim.command("normal "+str)
# Note the use of '...' to delimit a string containing double
# quotes
normal('"a2dd"aP')
vim.expr(str) *python-expr*
Evaluates the expression str using the vim internal expression
evaluator (see |expression|). Returns the expression result as a
string.
Examples:
text_width = vim.expr("'tw'")
str = vim.expr("12+12") # NB result is a string! Use
# string.atoi() to convert to
# a number.
Error object
vim.error *python-error*
All vim errors encountered by Python are raised as exceptions of type
vim.error.
Example:
try:
vim.command("put a")
except vim.error:
# nothing in register a
Constants
Note that these are not actually constants - in theory you could
reassign them. But this is silly, as you would then lose access to the
vim objects referred to by the variables.
vim.buffers *python-buffers*
A sequence object providing access to the list of vim buffers. The
following operations are supported:
b = vim.buffers[i] # Indexing (read-only)
b in vim.buffers # Membership test
n = len(vim.buffers) # Number of elements
for b in vim.buffers: # Sequential access
vim.windows *python-windows*
A sequence object providing access to the list of vim windows. The
following operations are supported:
w = vim.windows[i] # Indexing (read-only)
w in vim.windows # Membership test
n = len(vim.windows) # Number of elements
for w in vim.windows: # Sequential access
vim.current *python-current*
An object providing access (via specific attributes) to various
"current" objects available in vim:
vim.current.line The current line (RW) String
vim.current.buffer The current buffer (RO) Buffer
vim.current.window The current window (RO) Window
vim.current.range The current line range (RO) Range
The last case deserves a little explanation. When a range is specified
in the :python or :pyfile command, this range of lines is treated as
the "current range". A range is a bit like a buffer, but with all
access restricted to a subset of lines. See |python-range| for more
details.
Output from Python *python-output*
All output from Python code is displayed in the Vim message area.
Normal output is displayed as information messages, and error output
is displayed as error messages.
In implementation terms, this means that all output directed to
sys.stdout (including the output from print statements) is displayed
by vim as an information message, and all output directed to
sys.stderr (including error tracebacks) is displayed by vim as an
error message.
*python-input*
Input (via sys.stdin, including input() and raw_input()) is not
supported, and may cause the program to crash. This should probably be
fixed.
==============================================================================
3. Buffer objects *python-buffer*
Buffer objects represent vim buffers. They can be obtained in a number of
ways:
- via vim.current.buffer (|python-current|)
- from indexing vim.buffers (|python-buffers|)
- from the "buffer" attribute of a window (|python-window|)
Buffer objects have one read-only attribute - name - the full file name for
the buffer. They also have three methods (append, mark, and range) which are
described below.
Buffer objects can also be treated as sequence objects. In this context, they
act as if they were lists (yes, they are mutable) of strings, with each
element being a line of the buffer. All of the usual sequence operations,
including indexing, index assignment, slicing and slice assignment, work as
you would expect. Note that the result of indexing (slicing) a buffer is a
string (list of strings). This has one unusual consequence - b[:] is different
from b. In particular, "b[:] = None" deletes the whole of the buffer, whereas
"b = None" merely updates the variable b, with no effect on the buffer.
Buffer indexes start at zero, as is normal in Python. This differs from vim
line numbers, which start from 1. This is particularly relevant when dealing
with marks (see below) which use vim line numbers.
The buffer object methods are:
b.append(str) Append a line to the buffer
b.append(list) Append a list of lines to the buffer
Note that the option of supplying a list of strings to
the append method differs from the equivalent method
for Python's built-in list objects.
b.mark(name) Return a tuple (row,col) representing the position
of the named mark (can also get the []"<> marks)
b.range(s,e) Return a range object (see |python-range|) which
represents the part of the given buffer between line
numbers s and e (inclusive).
Examples (assume b is the current buffer)
print b.name # write the buffer file name
b[0] = "hello!!!" # replace the top line
b[:] = None # delete the whole buffer
del b[:] # delete the whole buffer (same as above)
b[0:0] = "add a line" # add a line at the top
del b[2] # delete a line (the third)
b.append("bottom") # add a line at the bottom
n = len(b) # number of lines
(row,col) = b.mark('a') # named mark
r = b.range(1,5) # a sub-range of the buffer
==============================================================================
4. Range objects *python-range*
Range objects represent a part of a vim buffer. They can be obtained in a
number of ways:
- via vim.current.range (|python-current|)
- from a buffer's range() method (|python-buffer|)
A range object is almost identical in operation to a buffer object. However,
all operations are restricted to the lines within the range (this line range
can, of course, change as a result of slice assignments, line deletions, or
the range.append() method).
Unlike buffers, ranges do not have a "name" attribute, nor do they have mark()
or range() methods. They do have an append() method, however, which adds
line(s) to the end of the range.
==============================================================================
5. Window objects *python-window*
Window objects represent vim windows. They can be obtained in a number of
ways:
- via vim.current.window (|python-current|)
- from indexing vim.windows (|python-windows|)
Window objects can only be manipulated through their attributes. They have no
methods, and no sequence or other interface.
Window attributes are
buffer (read-only) The buffer displayed in this window
cursor (read-write) The current cursor position in the window
This is a tuple, (row,col).
height (read-write) The window height, in rows
==============================================================================
top - back to help