XSM(1) X Version 11 (Release 6.6) XSM(1)
NAME
xsm - X Session Manager
SYNOPSIS
xsm [-display display] [-session sessionName] [-verbose]
DESCRIPTION
xsm is a session manager. A session is a group of
applications, each of which has a particular state. xsm
allows you to create arbitrary sessions - for example, you
might have a "light" session, a "development" session, or an
"xterminal" session. Each session can have its own set of
applications. Within a session, you can perform a
"checkpoint" to save application state, or a "shutdown" to
save state and exit the session. When you log back in to
the system, you can load a specific session, and you can
delete sessions you no longer want to keep.
Some session managers simply allow you to manually specify a
list of applications to be started in a session. xsm is
more powerful because it lets you run applications and have
them automatically become part of the session. On a simple
level, xsm is useful because it gives you this ability to
easily define which applications are in a session. The true
power of xsm, however, can be taken advantage of when more
and more applications learn to save and restore their state.
OPTIONS
-display display
Causes xsm to connect to the specified X display.
-session sessionName
Causes xsm to load the specified session, bypassing
the session menu.
-verbose
Turns on debugging information.
SETUP
.xsession file
Using xsm requires a change to your .xsession file:
The last program executed by your .xsession file should be
xsm. With this configuration, when the user chooses to shut
down the session using xsm, the session will truly be over.
Since the goal of the session manager is to restart clients
when logging into a session, your .xsession file, in
general, should not directly start up applications. Rather,
the applications should be started within a session. When
xsm shuts down the session, xsm will know to restart these
applications. Note however that there are some types of
Page 1 (printed 7/20/06)
XSM(1) X Version 11 (Release 6.6) XSM(1)
applications that are not "session aware". xsm allows you
to manually add these applications to your session (see the
section titled Client List).
SM_SAVE_DIR environment variable
If the SM_SAVE_DIR environment variable is defined, xsm will
save all configuration files in this directory. Otherwise,
they will be stored in the user's home directory. Session
aware applications are also encouraged to save their
checkpoint files in the SM_SAVE_DIR directory, although the
user should not depend on this convention.
Default Startup Applications
The first time xsm is started, it will need to locate a list
of applications to start up. For example, this list might
include a window manager, a session management proxy, and an
xterm. xsm will first look for the file .xsmstartup in the
user's home directory. If that file does not exists, it
will look for the system.xsm file that was set up at
installation time. Note that xsm provides a "fail safe"
option when the user chooses a session to start up. The
fail safe option simply loads the default applications
described above.
Each line in the startup file should contain a command to
start an application. A sample startup file might look
this:
<start of file>
twm
smproxy
xterm
<end of file>
STARTING A SESSION
When xsm starts up, it first checks to see if the user
previously saved any sessions. If no saved sessions exist,
xsm starts up a set of default applications (as described
above in the section titled Default Startup Applications).
If at least one session exists, a session menu is presented.
The [-session sessionName] option forces the specified
session to be loaded, bypassing the session menu.
The session menu
The session menu presents the user with a list of sessions
to choose from. The user can change the currently selected
session with the mouse, or by using the up and down arrows
on the keyboard. Note that sessions which are locked (i.e.
running on a different display) can not be loaded or
deleted.
The following operations can be performed from the session
Page 2 (printed 7/20/06)
XSM(1) X Version 11 (Release 6.6) XSM(1)
menu:
Load Session Pressing this button will load the
currently selected session.
Alternatively, hitting the Return key
will also load the currently selected
session, or the user can double click
a session from the list.
Delete Session This operation will delete the
currently selected session, along with
all of the application checkpoint
files associated with the session.
After pressing this button, the user
will be asked to press the button a
second time in order to confirm the
operation.
Default/Fail Safe xsm will start up a set of default
applications (as described above in
the section titled Default Startup
Applications). This is useful when
the user wants to start a fresh
session, or if the session
configuration files were corrupted and
the user wants a "fail safe" session.
Cancel Pressing this button will cause xsm to
exit. It can also be used to cancel a
"Delete Session" operation.
CONTROLLING A SESSION
After xsm determines which session to load, it brings up its
main window, then starts up all applications that are part
of the session. The title bar for the session manager's
main window will contain the name of the session that was
loaded.
The following options are available from xsm's main window:
Client List Pressing this button brings up a window
containing a list of all clients that are
in the current session. For each client,
the host machine that the client is
running on is presented. As clients are
added and removed from the session, this
list is updated to reflect the changes.
The user is able to control how these
clients are restarted (see below).
By pressing the View Properties button,
the user can view the session management
Page 3 (printed 7/20/06)
XSM(1) X Version 11 (Release 6.6) XSM(1)
properties associated with the currently
selected client.
By pressing the Clone button, the user can
start a copy of the selected application.
By pressing the Kill Client button, the
user can remove a client from the session.
By selecting a restart hint from the
Restart Hint menu, the user can control
the restarting of a client. The following
hints are available:
- The Restart If Running hint indicates
that the client should be restarted in the
next session if it is connected to the
session manager at the end of the current
session.
- The Restart Anyway hint indicates that
the client should be restarted in the next
session even if it exits before the
current session is terminated.
- The Restart Immediately hint is similar
to the Restart Anyway hint, but in
addition, the client is meant to run
continuously. If the client exits, the
session manager will try to restart it in
the current session.
- The Restart Never hint indicates that
the client should not be restarted in the
next session.
Note that all X applications may not be
"session aware". Applications that are
not session aware are ones that do not
support the X Session Management Protocol
or they can not be detected by the Session
Management Proxy (see the section titled
THE PROXY). xsm allows the user to
manually add such applications to the
session. The bottom of the Client List
window contains a text entry field in
which application commands can be typed
in. Each command should go on its own
line. This information will be saved with
the session at checkpoint or shutdown
time. When the session is restarted, xsm
will restart these applications in
Page 4 (printed 7/20/06)
XSM(1) X Version 11 (Release 6.6) XSM(1)
addition to the regular "session aware"
applications.
Pressing the Done button removes the
Client List window.
Session Log... The Session Log window presents useful
information about the session. For
example, when a session is restarted, all
of the restart commands will be displayed
in the log window.
Checkpoint By performing a checkpoint, all
applications that are in the session are
asked to save their state. Not every
application will save its complete state,
but at a minimum, the session manager is
guaranteed that it will receive the
command required to restart the
application (along with all command line
options). A window manager participating
in the session should guarantee that the
applications will come back up with the
same window configurations.
If the session being checkpointed was
never assigned a name, the user will be
required to specify a session name.
Otherwise, the user can perform the
checkpoint using the current session name,
or a new session name can be specified.
If the session name specified already
exists, the user will be given the
opportunity to specify a different name or
to overwrite the already existing session.
Note that a session which is locked can
not be overwritten.
When performing a checkpoint, the user
must specify a Save Type which informs the
applications in the session how much state
they should save.
The Local type indicates that the
application should save enough information
to restore the state as seen by the user.
It should not affect the state as seen by
other users. For example, an editor would
create a temporary file containing the
contents of its editing buffer, the
location of the cursor, etc...
Page 5 (printed 7/20/06)
XSM(1) X Version 11 (Release 6.6) XSM(1)
The Global type indicates that the
application should commit all of its data
to permanent, globally accessible storage.
For example, the editor would simply save
the edited file.
The Both type indicates that the
application should do both of these. For
example, the editor would save the edited
file, then create a temporary file with
information such as the location of the
cursor, etc...
In addition to the Save Type, the user
must specify an Interact Style.
The None type indicates that the
application should not interact with the
user while saving state.
The Errors type indicates that the
application may interact with the user
only if an error condition arises.
The Any type indicates that the
application may interact with the user for
any purpose. Note that xsm will only
allow one application to interact with the
user at a time.
After the checkpoint is completed, xsm
will, if necessary, display a window
containing the list of applications which
did not report a successful save of state.
Shutdown A shutdown provides all of the options
found in a checkpoint, but in addition,
can cause the session to exit. Note that
if the interaction style is Errors or Any,
the user may cancel the shutdown. The
user may also cancel the shutdown if any
of the applications report an unsuccessful
save of state.
The user may choose to shutdown the
session with our without performing a
checkpoint.
HOW XSM RESPONDS TO SIGNALS
xsm will respond to a SIGTERM signal by performing a
shutdown with the following options: fast, no interaction,
Page 6 (printed 7/20/06)
XSM(1) X Version 11 (Release 6.6) XSM(1)
save type local. This allows the user's session to be saved
when the system is being shutdown. It can also be used to
perform a remote shutdown of a session.
xsm will respond to a SIGUSR1 signal by performing a
checkpoint with the following options: no interaction, save
type local. This signal can be used to perform a remote
checkpoint of a session.
THE PROXY
Since not all applications have been ported to support the X
Session Management Protocol, a proxy service exists to allow
"old" clients to work with the session manager. In order
for the proxy to detect an application joining a session,
one of the following must be true:
- The application maps a top level window containing the
WM_CLIENT_LEADER property. This property provides a pointer
to the client leader window which contains the WM_CLASS,
WM_NAME, WM_COMMAND, and WM_CLIENT_MACHINE properties.
or ...
- The application maps a top level window which does not
contain the WM_CLIENT_LEADER property. However, this top
level window contains the WM_CLASS, WM_NAME, WM_COMMAND, and
WM_CLIENT_MACHINE properties.
An application that support the WM_SAVE_YOURSELF protocol
will receive a WM_SAVE_YOURSELF client message each time the
session manager issues a checkpoint or shutdown. This
allows the application to save state. If an application
does not support the WM_SAVE_YOURSELF protocol, then the
proxy will provide enough information to the session manager
to restart the application (using WM_COMMAND), but no state
will be restored.
REMOTE APPLICATIONS
xsm requires a remote execution protocol in order to restart
applications on remote machines. Currently, xsm supports
the rstart protocol. In order to restart an application on
remote machine X, machine X must have rstart installed. In
the future, additional remote execution protocols may be
supported.
SEE ALSO
smproxy(1), rstart(1)
AUTHORS
Ralph Mor, X Consortium
Jordan Brown, Quarterdeck Office Systems
Page 7 (printed 7/20/06)
