SJIRJC(8)SJIRJC(8)NAMEsjirjc - test the SJI Jukebox Interface SJIRJC command
SYNOPSISsjirjc devname
DESCRIPTION
The sjirjc program tests the SJIRJC command on SJI compliant Jukeboxes
(see libsji(8)). This command reads internal configuration information
and options about a Jukebox and prints it out.
Example output for this command might look like:
Device: scsidev@0.2.1
Number of Drives: 1
Number Drive Pairs: 1
Number of Import/Export Elements: 0
Number of Import/Export Pairs: 1
Number of Slots: 7
Number of Slot Pairs: 1
Number of Transport Elements: 1
Number of Transport Pairs: 1
Initialize Element Status Supported
Auto Eject Supported
The devname argument should be any device name that can be used to
reach a SJI compliant Jukebox driven by the system. Typical usage is in
constructing the name that contains the SCSI Bus, the SCSI Target ID
and the SCSI Lun on that target, e.g., scsidev@0.4.0.
Since the SJI specification allows for multiple disjoint sets of ele‐
ments, you will always see a count of 'Pairs' (but the author has never
run across a value other than '1'). The output displays the number of
man drives, slots, transports (gripper arm), and input/export elements.
In addition, various internal library options are printed out.
SEE ALSOlibsji(8)NetWorker 7.3.2 Aug 23, 06 SJIRJC(8)