SHM_OPEN(P) POSIX Programmer's Manual SHM_OPEN(P)NAMEshm_open - open a shared memory object (REALTIME)
SYNOPSIS
#include <sys/mman.h>
int shm_open(const char *name, int oflag, mode_t mode);
DESCRIPTION
The shm_open() function shall establish a connection between a shared
memory object and a file descriptor. It shall create an open file
description that refers to the shared memory object and a file descrip‐
tor that refers to that open file description. The file descriptor is
used by other functions to refer to that shared memory object. The name
argument points to a string naming a shared memory object. It is
unspecified whether the name appears in the file system and is visible
to other functions that take pathnames as arguments. The name argument
conforms to the construction rules for a pathname. If name begins with
the slash character, then processes calling shm_open() with the same
value of name refer to the same shared memory object, as long as that
name has not been removed. If name does not begin with the slash char‐
acter, the effect is implementation-defined. The interpretation of
slash characters other than the leading slash character in name is
implementation-defined.
If successful, shm_open() shall return a file descriptor for the shared
memory object that is the lowest numbered file descriptor not currently
open for that process. The open file description is new, and therefore
the file descriptor does not share it with any other processes. It is
unspecified whether the file offset is set. The FD_CLOEXEC file
descriptor flag associated with the new file descriptor is set.
The file status flags and file access modes of the open file descrip‐
tion are according to the value of oflag. The oflag argument is the
bitwise-inclusive OR of the following flags defined in the <fcntl.h>
header. Applications specify exactly one of the first two values
(access modes) below in the value of oflag:
O_RDONLY
Open for read access only.
O_RDWR Open for read or write access.
Any combination of the remaining flags may be specified in the value of
oflag:
O_CREAT
If the shared memory object exists, this flag has no effect,
except as noted under O_EXCL below. Otherwise, the shared memory
object is created; the user ID of the shared memory object shall
be set to the effective user ID of the process; the group ID of
the shared memory object is set to a system default group ID or
to the effective group ID of the process. The permission bits of
the shared memory object shall be set to the value of the mode
argument except those set in the file mode creation mask of the
process. When bits in mode other than the file permission bits
are set, the effect is unspecified. The mode argument does not
affect whether the shared memory object is opened for reading,
for writing, or for both. The shared memory object has a size of
zero.
O_EXCL If O_EXCL and O_CREAT are set, shm_open() fails if the shared
memory object exists. The check for the existence of the shared
memory object and the creation of the object if it does not
exist is atomic with respect to other processes executing
shm_open() naming the same shared memory object with O_EXCL and
O_CREAT set. If O_EXCL is set and O_CREAT is not set, the result
is undefined.
O_TRUNC
If the shared memory object exists, and it is successfully
opened O_RDWR, the object shall be truncated to zero length and
the mode and owner shall be unchanged by this function call. The
result of using O_TRUNC with O_RDONLY is undefined.
When a shared memory object is created, the state of the shared memory
object, including all data associated with the shared memory object,
persists until the shared memory object is unlinked and all other ref‐
erences are gone. It is unspecified whether the name and shared memory
object state remain valid after a system reboot.
RETURN VALUE
Upon successful completion, the shm_open() function shall return a non-
negative integer representing the lowest numbered unused file descrip‐
tor. Otherwise, it shall return -1 and set errno to indicate the error.
ERRORS
The shm_open() function shall fail if:
EACCES The shared memory object exists and the permissions specified by
oflag are denied, or the shared memory object does not exist and
permission to create the shared memory object is denied, or
O_TRUNC is specified and write permission is denied.
EEXIST O_CREAT and O_EXCL are set and the named shared memory object
already exists.
EINTR The shm_open() operation was interrupted by a signal.
EINVAL The shm_open() operation is not supported for the given name.
EMFILE Too many file descriptors are currently in use by this process.
ENAMETOOLONG
The length of the name argument exceeds {PATH_MAX} or a pathname
component is longer than {NAME_MAX}.
ENFILE Too many shared memory objects are currently open in the system.
ENOENT O_CREAT is not set and the named shared memory object does not
exist.
ENOSPC There is insufficient space for the creation of the new shared
memory object.
The following sections are informative.
EXAMPLES
None.
APPLICATION USAGE
None.
RATIONALE
When the Memory Mapped Files option is supported, the normal open()
call is used to obtain a descriptor to a file to be mapped according to
existing practice with mmap(). When the Shared Memory Objects option
is supported, the shm_open() function shall obtain a descriptor to the
shared memory object to be mapped.
There is ample precedent for having a file descriptor represent several
types of objects. In the POSIX.1-1990 standard, a file descriptor can
represent a file, a pipe, a FIFO, a tty, or a directory. Many imple‐
mentations simply have an operations vector, which is indexed by the
file descriptor type and does very different operations. Note that in
some cases the file descriptor passed to generic operations on file
descriptors is returned by open() or creat() and in some cases returned
by alternate functions, such as pipe(). The latter technique is used by
shm_open().
Note that such shared memory objects can actually be implemented as
mapped files. In both cases, the size can be set after the open using
ftruncate(). The shm_open() function itself does not create a shared
object of a specified size because this would duplicate an extant func‐
tion that set the size of an object referenced by a file descriptor.
On implementations where memory objects are implemented using the
existing file system, the shm_open() function may be implemented using
a macro that invokes open(), and the shm_unlink() function may be
implemented using a macro that invokes unlink().
For implementations without a permanent file system, the definition of
the name of the memory objects is allowed not to survive a system
reboot. Note that this allows systems with a permanent file system to
implement memory objects as data structures internal to the implementa‐
tion as well.
On implementations that choose to implement memory objects using memory
directly, a shm_open() followed by an ftruncate() and close() can be
used to preallocate a shared memory area and to set the size of that
preallocation. This may be necessary for systems without virtual mem‐
ory hardware support in order to ensure that the memory is contiguous.
The set of valid open flags to shm_open() was restricted to O_RDONLY,
O_RDWR, O_CREAT, and O_TRUNC because these could be easily implemented
on most memory mapping systems. This volume of IEEE Std 1003.1-2001 is
silent on the results if the implementation cannot supply the requested
file access because of implementation-defined reasons, including hard‐
ware ones.
The error conditions [EACCES] and [ENOTSUP] are provided to inform the
application that the implementation cannot complete a request.
[EACCES] indicates for implementation-defined reasons, probably hard‐
ware-related, that the implementation cannot comply with a requested
mode because it conflicts with another requested mode. An example might
be that an application desires to open a memory object two times, map‐
ping different areas with different access modes. If the implementa‐
tion cannot map a single area into a process space in two places, which
would be required if different access modes were required for the two
areas, then the implementation may inform the application at the time
of the second open.
[ENOTSUP] indicates for implementation-defined reasons, probably hard‐
ware-related, that the implementation cannot comply with a requested
mode at all. An example would be that the hardware of the implementa‐
tion cannot support write-only shared memory areas.
On all implementations, it may be desirable to restrict the location of
the memory objects to specific file systems for performance (such as a
RAM disk) or implementation-defined reasons (shared memory supported
directly only on certain file systems). The shm_open() function may be
used to enforce these restrictions. There are a number of methods
available to the application to determine an appropriate name of the
file or the location of an appropriate directory. One way is from the
environment via getenv(). Another would be from a configuration file.
This volume of IEEE Std 1003.1-2001 specifies that memory objects have
initial contents of zero when created. This is consistent with current
behavior for both files and newly allocated memory. For those implemen‐
tations that use physical memory, it would be possible that such imple‐
mentations could simply use available memory and give it to the process
uninitialized. This, however, is not consistent with standard behavior
for the uninitialized data area, the stack, and of course, files.
Finally, it is highly desirable to set the allocated memory to zero for
security reasons. Thus, initializing memory objects to zero is
required.
FUTURE DIRECTIONS
None.
SEE ALSOclose() , dup() , exec() , fcntl() , mmap() , shmat() , shmctl() ,
shmdt() , shm_unlink() , umask() , the Base Definitions volume of
IEEE Std 1003.1-2001, <fcntl.h>, <sys/mman.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of
Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online
at http://www.opengroup.org/unix/online.html .
IEEE/The Open Group 2003 SHM_OPEN(P)
