rtsol man page on OpenDarwin

Man page or keyword search:  
man Server   3202 pages
apropos Keyword Search (all sections)
Output format
OpenDarwin logo
[printable version]

RTSOLD(8)		  BSD System Manager's Manual		     RTSOLD(8)

NAME
     rtsold — router solicitation daemon

SYNOPSIS
     rtsold [-dDfm1] interface ...
     rtsold [-dDfm1] -a
     rtsol [-dD] interface ...
     rtsol [-dD] -a

DESCRIPTION
     rtsold is the daemon program to send ICMPv6 Router Solicitation messages
     on the specified interfaces.  If a node (re)attaches to a link, rtsold
     sends some Router Solicitations on the link destined to the link-local
     scope all-routers multicast address to discover new routers and to get
     non link-local addresses.

     rtsold should be used on IPv6 hosts (non-router nodes) only.

     If you invoke the program as rtsol, it will transmit probes from the
     specified interface, without becoming a daemon.  In other words, rtsol
     behaves as “rtsold -f1 interfaces”.

     Specifically, rtsold sends at most 3 Router Solicitations on an interface
     after one of the following events:

     ·	 Just after invocation of rtsold daemon.
     ·	 The interface is up after a temporary interface failure.  rtsold
	 detects such failures by periodically probing to see if the status of
	 the interface is active or not.  Note that some network cards and
	 drivers do not allow the extraction of link state.  In such cases,
	 rtsold cannot detect the change of the interface status.
     ·	 Every 60 seconds if the -m option is specified and the rtsold daemon
	 cannot get the interface status.  This feature does not conform to
	 the IPv6 neighbor discovery specification, but is provided for mobile
	 stations.  The default interval for router advertisements, which is
	 on the order of 10 minutes, is slightly long for mobile stations.
	 This feature is provided for such stations so that they can find new
	 routers as soon as possible when they attach to another link.

     Once rtsold has sent a Router Solicitation, and has received a valid
     Router Advertisement, it refrains from sending additional solicitations
     on that interface, until the next time one of the above events occurs.

     When sending a Router Solicitation on an interface, rtsold includes a
     Source Link-layer address option if the interface has a link-layer
     address.

     Upon receipt of signal SIGUSR1, rtsold will dump the current internal
     state into /var/run/rtsold.dump.

OPTIONS
     -a	     Autoprobe outgoing interface.  rtsold will try to find a non-
	     loopback, non-point-to-point, IPv6-capable interface.  If rtsold
	     finds multiple interfaces, rtsold will exit with error.

     -d	     Enable debugging.

     -D	     Enable more debugging including the printing of internal timer
	     information.

     -f	     -f prevents rtsold from becoming a daemon (foreground mode).
	     Warning messages are generated to standard error instead of
	     syslog(3).

     -m	     Enable mobility support.  If this option is specified, rtsold
	     sends probing packets to default routers that have advertised
	     Router Advertisements when the node (re)attaches to an interface.
	     Moreover, if the option is specified, rtsold periodically sends
	     Router Solicitation on an interface that does not support
	     SIOCGIFMEDIA ioctl.

     -1	     Perform only one probe.  Transmit Router Solicitation packets
	     until at least one valid Router Advertisement packet has arrived
	     on each interface, then exit.

DIAGNOSTICS
     The rtsold utility exits 0 on success, and >0 if an error occurs.

FILES
     /var/run/rtsold.pid   the pid of the currently running rtsold.
     /var/run/rtsold.dump  dumps internal state on.

SEE ALSO
     rtadvd(8), sysctl(8)

HISTORY
     The rtsold command is based on the rtsol command, which first appeared in
     WIDE/KAME IPv6 protocol stack kit.	 rtsol is now integrated into
     rtsold(8).

BUGS
     In some operating systems, when a PCMCIA network card is removed and
     reinserted, the corresponding interface index is changed.	However,
     rtsold assumes such changes will not occur, and always uses the index
     that it got at invocation. As a result, rtsold may not work if you rein‐
     sert a network card.  In such a case, rtsold should be killed and
     restarted.

     The IPv6 autoconfiguration specification assumes a single-interface host.
     You may see kernel error messages if you try to autoconfigure a host with
     multiple interfaces.  Also, it seems contradictory for rtsold to accept
     multiple interface arguments.

BSD				 May 17, 1998				   BSD
[top]

List of man pages available for OpenDarwin

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net