RPOST(1)RPOST(1)NAMErpost - post an article to an NNTP news server
SYNOPSISrpost [ hostname ] [ @filename ] [ -s | -S filename ] [ -e | -E file‐
name ] [ -b batchfile ] [ -r rnews_file rnews_path ] [ -p prefix ] [ -Q
] [ -d ] [ -U userid ] [ -P password ] [ -M ] [ -N port_number ] [ -l
phrase_file ] [ -D ] [ -T timeout ] [ -u ] [ -n ]
[ -F perl_file ] [ -i ] [ -z ] [ -f filter $$o=<outfile> filter_arg1
... ]
DESCRIPTION
Rpost will post one or more articles, specified by hostname. If host‐
name is not specified, rpost will use the environment variable
NNTPSERVER. The hostname may optionally include the port number, in
the form Host:Port will be ignored.
Generic Options
@filename
This option tells rpost to read other options from a file in addition
to the command line.
-D This option tells rpost to log various debugging messages to
"debug.suck", primarily for use by the developer.
-e|-E filename
These options will send all error messages (normally displayed on
stderr), to an alternate file. The lower case version, -e, will send
the error messages to the compiled-in default defined in suck_config.h.
The default is suck.errlog. The upper case version, -E, requires the
filename parameter. All error messages will then be sent to this file.
-i
This option tells rpost to ignore the 201 (no posting allowed) from the
welcoming message and to try and post anyway. Some news servers
(inn-2.3.1) send 201 no posting allowed when they are using the
AUTHINFO commands to verify permission to post.
-l phrase_file
This option tells rpost to load in an alternate phrase file, instead of
using the built-in messages. This allows you to have rpost print
phrases in another language, or to allow you to customize the messages
without re-building. See the "FOREIGN LANGUAGE PHRASES" in suck.1 for
more details.
-M
This option tells rpost to send the "mode reader" command to the remote
server. If you get an invalid command message from rpost immediately
after the welcome announcement, then try this option.
-n
This option tells rpost to show the name of the file as it is being
uploaded.
-N port_number
This option tells rpost to use an alternate NNRP port number when con‐
necting to the host, instead of the default port number, 119.
-s|-S filename
These options will send all status messages (normally displayed on std‐
out), to an alternate file. The lower case version, -s, will send the
status messages to the compiled-in default defined in suck_config.h.
The default is /dev/null, so no status messages will be displayed. The
upper case version, -S, requires the filename parameter. All status
messages will then be sent to this file.
-T This option overrides the compiled-in TIMEOUT value. This is how
long rpost waits for data from the remote host before timing out and
aborting.
-u This option tells rpost to send the AUTHINFO USER command immedi‐
ately upon connect to the remote server, rather than wait for a request
for authorization. You must supply the -U and -P options when you use
this option.
-U userid -P password
These two options let you specify a userid and password, if your NNTP
server requires them.
-Q
This option allows you to specify the userid and password via the envi‐
ronment variables "NNTP_USER" and "NNTP_PASS" instead of on the command
line. This prevents a potential security issue where someone doing a
ps command can see your login and password.
-z This option tells rpost to use SSL to communicate with the remote
hosts, if SSL was compiled into rpost.
STDIN MODErpost
rpost hostname
rpost reads one article from stdin and sends it to the NNTP server. The
article must have a header of at least two lines, namely Newsgroups:
and Subject: and a body (the article). Header and body have to be sepa‐
rated by a newline. Rpost does not change the article in any way.
Rpost uses the POST command to post your article, just like any stan‐
dard newsreader. This is handy when using SLIP and PPP, since most
providers do not allow any other method to post articles (such as
nntpsend or innxmit).
BATCH MODErpost hostname -b batchfile -p prefix -d
This batch mode allows you to give rpost a list of articles, and have
them all posted.
-b batchfile
A listing of the articles to be posted. This parameter is REQUIRED.
This file contains one article per line, with the line being the path
to the file containing the article. For example:
-b /usr/spool/news/out.going/pixi
IF there are any problems uploading a specific article, a "failed" file
will be created. It will be called "batchfile".fail, and contain the
line from this batchfile for the article(s) that did not successfully
upload. This file can be used to re-run the failed messages through
rpost. NOTE: duplicate articles are NOT considered an error for the
fail file.
-d
If the upload of articles is successful, this option will cause rpost
to
delete the batchfile named in the -b option.
-p prefix
If the batchfile does not contain a full path, but rather a partial
path, this parameter must be specified. This is useful when the batch
file is generated by another program. For example, Inn lists the path
in the out.going file relative to its base directory /usr/spool/news.
In that case just use:
-p /usr/spool/news
RNEWS MODErpost hostname -r rnews_file rnews_path
This option allows you to use rnews generated file(s) to post. It
requires two parameters.
rnews_file - this is the base name for the rnews files. If you have
your rnews file(s) called batch1, batch2, etc., then this argument
would be "batch".
rnews_path - this is the path to the location of the rnews files.
-r batch /usr/tmp/rnews
-d
If the upload of all the articles from any of the rnews files is suc‐
cessful, then this option will cause rpost to delete that particular
rnews file.
FILTER MODES-f filter $$o=<outfile> filter_arg1 filter_arg2 ...
In many cases, each article must be massaged before the remote NNTP
will accept it. This option, and the embedded perl filter option
below, lets you do that. These filters do not work in STDIN mode, but
in the batch and rnews modes from above. Note that the -f .... option
must be the LAST option, as everything that follows it is passed to the
filter, except as noted below. There are three required parameters
with this:
$$o=<outfile> - <outfile> is the name of the file produced by your
filter that will get uploaded to the remote NNTP server. THIS IS NOT
passed to your filter program. This can be specified anywhere on the
command line AFTER the -f filter argument, either before the filter
name, or after it.
filter - name of the program to call. Whatever follows filter, EXCEPT
for the $$o, are arguments passed to the filter.
arg1 - The first argument to your filter program/script. It most
likely will be $$i, which rpost fills in with the name of the article
that needs to be cleaned up.
arg2 ... - any additional args needed can be specified.
Let's clarify this a bit with an example. Some NNTP servers don't like
to receive articles with the NNTP-Posting-Host filled in. Create a
short shell script to delete this from a file:
-myscr--------------------------------------------
#!/bin/sh
sed -e "/^NNTP-Posting-Host/d" $1 > $2
-end myscr----------------------------------------
Then call rpost like this:
rpost localhost -b /usr/spool/news/out.going/pixi -f myscr
\$\$o=/tmp/FILTERED_MSG \$\$i /tmp/FILTERED_MSG
Then, before each article is uploaded, myscr is called like such:
myscr infilename /tmp/FILTERED_MSG
After myscr has finished, rpost uploads the cleaned up article, stored
in /tmp/FILTERED_MSG, to the remote NNTP server.
NOTE:
The $$o and $$i have to be escaped, using either the backslashes as
above, or with single quotes, to prevent the shell from trying to
interpret these as variables. Failure to escape them will result in
rpost not working!
-F perlfilter
This option allows you to use an embedded perl filter to filter your
articles. In order to use this, you must edit the Makefile, and define
the various PERL_ options. It has a couple of advantages over the -f
option above. Because it is embedded perl, there are no forks and exe‐
cls() done, so it should be faster. Also, you don't need to worry
about the arguments to the program and escaping $$, etc as above.
Rpost will, when it starts up, load in the perlfilter file designated
and parse it for syntax errors. Then, for each article to be uploaded,
rpost will call the subroutine "perl_rpost", contained in the perlfil‐
ter file. See sample/put.news.pl for a complete working example.
There are three key points you need to be aware of when creating your
filter.
1. The perlfilter file must contain the line "package
Embed::Persistant;", so that variables in the perlfilter file
don't clash with rpost variables, and the subroutine must be
called "perl_rpost". This can be changed by editting the
PERL_RPOST_SUB define in suck_config.h.
2. The perl_rpost subroutine receives the input file name as its
sole argument, and must return the full path to the location of
the filtered article as a single scalar string (return $out‐
file).
3. The subroutine must explicitly close the output file (con‐
taining the filtered argument) before it returns. This is
because perl will only do an automatic close upon program com‐
pletion (in our case when rpost exits), or when the file handle
is reused (the next time the subroutine is called). If the
close is not done, then more than likely, a 0 byte file will
exist when rpost tries to post the article, and errors will
result.
WARNING:
Be very careful with what the filter program deletes from the article.
Deleting the wrong line can have bad effects later on. For example, do
not delete the MSG-ID line, as this could cause a single message to be
posted many times, depending on the configuration of both the local and
remote newserver.
RPOST ARGUMENT FILE
If you specify @filename on the command line, rpost will read from
filename and parse it for any arguments that you wish to pass to rpost.
You specify the same arguments in this file as you do on the command
line. The arguments can be on one line, or spread out among more than
one line. You may also use comments. Comments begin with '#' and go
to the end of a line. All command line arguments override arguments in
the file. One advantage to using the file instead of the command line,
is that you don't have to escape any special characters, such as $.
# Sample Argument file
-b batch # batch file option
-M # use mode reader option
EXIT VALUES
Rpost returns the following exit values:
0 = success
1 = error posting an article
2 = unable to do NNTP authorization with the remote server.
3 = unexpected answer to command when doing NNTP authorization.
-1 = other fatal error.
SEE ALSOsuck(1), testhost(1), lpost(1).
RPOST(1)
