rotctld man page on DragonFly
[printable version]
ROTCTLD(8) Rotator Control Daemon ROTCTLD(8)
NAME
rotctld - Hamlib TCP rotator control daemon
SYNOPSIS
rotctld [OPTION]...
DESCRIPTION
The rotctld program is an NEW Hamlib rotator control daemon ready for
testing that handles client requests via TCP sockets. This allows mul‐
tiple user programs to share one rotator (this needs testing). Multiple
rotators can be controlled on different TCP ports by use of multiple
rotctld processes. The syntax of the commands are the same as rotctl.
It is hoped that rotctld will be especially useful for client authors
using languages such as Perl, Python, PHP, and others.
rotctld communicates to a client through a TCP socket using text com‐
mands shared with rotctl. The protocol is simple, commands are sent to
rotctld on one line and rotctld responds to "get" commands with the
requested values, one per line, when successful, otherwise, it responds
with one line "RPRT x", where x is a negative number indicating the
error code. Commands that do not return values respond with the line
"RPRT x", where x is zero when successful, otherwise is a regative num‐
ber indicating the error code. Each line is terminated with a newline
'\n' character. This protocol is primarily for use by the NET rotctl
(rot model 2) backend.
A separate Extended Response protocol extends the above behavior by
echoing the received command string as a header, any returned values as
a key: value pair, and the "RPRT x" string as the end of response
marker which includes the Hamlib success or failure value. See the
PROTOCOL section for details. Consider using this protocol for clients
that will interact with rotctld directly through a TCP socket.
Keep in mind that Hamlib is BETA level software. While a lot of back‐
end libraries lack complete rotator support, the basic functions are
usually well supported. The API may change without publicized notice,
while an advancement of the minor version (e.g. 1.1.x to 1.2.x) indi‐
cates such a change.
Please report bugs and provide feedback at the e-mail address given in
the REPORTING BUGS section. Patches and code enhancements are also
welcome.
OPTIONS
This program follows the usual GNU command line syntax, with long
options starting with two dashes ('-').
Here is a summary of the supported options:
-m, --model=id
Select rotator model number. See -l, "list" option below.
-r, --rot-file=device
Use device as the file name of the port the rotator is con‐
nected. Often a serial port, but could be a USB to serial
adapter or USB port device. Typically /dev/ttyS0, /dev/ttyS1,
/dev/ttyUSB0, etc. on Linux or COM1, COM2, etc. on Win32.
-s, --serial-speed=baud
Set serial speed to baud rate. Uses maximum serial speed from
rotor backend capabilities (set by -m above) as the default.
-T, --listen-addr=IPADDR
Use IPADDR as the listening IP address. The default is ANY.
-t, --port=number
Use number as the TCP listening port. The default is 4533.
N.B.: As rigctld's default port is 4532, it is advisable to use
odd numbered ports for rotctld, e.g. 4533, 4535, 4537, etc.
-L, --show-conf
List all config parameters for the rotator defined with -m
above.
-C, --set-conf=parm=val[,parm=val]*
Set config parameter. e.g. --set-conf=stop_bits=2
Use -L option for a list.
-l, --list
List all model numbers defined in Hamlib and exit. As of
1.2.15.1 the list is sorted by model number.
N.B. In Linux the list can be scrolled back using Shift-PageUp/
Shift-PageDown, or using the scrollbars of a virtual terminal in
X or the cmd window in Windows. The output can be piped to
'more' or 'less', e.g. 'rotctld -l | more'.
-u, --dump-caps
Dump capabilities for the rotator defined with -m above and
exit.
-v, --verbose
Set verbose mode, cumulative (see DIAGNOSTICS below).
-h, --help
Show a summary of these options and exit.
-V, --version
Show the version of rotctld and exit.
N.B. Some options may not be implemented by a given backend and will
return an error. This is most likely to occur with the --set-conf and
--show-conf options.
Please note that the backend for the rotator to be controlled, or the
rotator itself may not support some commands. In that case, the opera‐
tion will fail with a Hamlib error code.
COMMANDS
Commands can be sent over the TCP socket either as a single char, or as
a long command name plus the value(s) space separated on one '\n' ter‐
minated line. See PROTOCOL.
Since most of the Hamlib operations have a set and a get method, an
upper case letter will be used for set methods whereas the correspond‐
ing lower case letter refers to the get method. Each operation also
has a long name; prepend a backslash to send a long command name.
Example (Perl): `print $socket "\\dump_caps\n";' to see what the
rotor's backend can do (NOTE: In Perl and many other languages a '\'
will need to be escaped with a preceding '\' so that even though two
backslash characters appear in the code, only one will be passed to
rotctld. This is a possible bug, beware!).
Please note that the backend for the rotator to be controlled, or the
rotator itself may not support some commands. In that case, the opera‐
tion will fail with a Hamlib error message.
Here is a summary of the supported commands (In the case of "set" com‐
mands the quoted string is replaced by the value in the description.
In the case of "get" commands the quoted string is the key name of the
value returned.):
P, set_pos 'Azimuth' 'Elevation'
Set position: Azimuth and Elevation as double precision floating
point values.
p, get_pos
Get position: 'Azimuth' and 'Elevation' as double precision
floating point values.
M, move 'Direction' 'Speed'
Move the rotator in a specific direction at the given rate.
Values are integers where Direction is defined as 2 = Up, 4 =
Down, 8 = Left, and 16 = Right. Speed is an integer between 1
and 100. Not all backends that implement the move command use
the Speed value. At this time only the gs232a utilizes the
Speed parameter.
S, stop
Stop the rotator.
K, park
Park the antenna.
C, set_conf 'Token' 'Value'
Set Token to Value.
Backend dependent. Needs testing.
R, reset 'Reset'
Reset the rotator.
Integer value of '1' for Reset All.
_, get_info
Get misc information about the rotator.
At the moment returns 'Model Name'.
w, send_cmd 'Cmd'
Send raw command string to rotator.
For binary protocols enter values as \0xAA\0xBB. Expect a
'Reply' from the rotator which will likely be a binary block or
an ASCII string.
Locator Commands
These commands offer conversions of Degrees Minutes Seconds to other
formats, Maidenhead square locator conversions and distance and azimuth
conversions.
L, lonlat2loc 'Longitude' 'Latitude' 'Loc Len [2-12]'
Returns the Maidenhead locator for the given 'Longitude' and
'Latitude'.
Both are floating point values. The precision of the returned
square is controlled by 'Loc Len' which should be an even num‐
bered integer value between 2 and 12.
For example, "+L -170.000000 -85.000000 12\n" returns "Locator:
AA55AA00AA00\n".
l, loc2lonlat 'Locator'
Returns 'Longitude' and 'Latitude' in decimal degrees at the
approximate center of the requested grid square (despite the use
of double precision variables internally, some rounding error
occurs). West longitude is expressed as a negative value.
South latitude is expressed as a negative value. Locator can be
from 2 to 12 characters in length.
For example, "+l AA55AA00AA00\n" returns "Longitude:
-169.999983\nLatitude: -84.999991\n".
D, dms2dec 'Degrees' 'Minutes' 'Seconds' 'S/W'
Returns 'Dec Degrees', a signed floating point value.
Degrees and Minutes are integer values and Seconds is a floating
point value. S/W is a flag with '1' indicating South latitude
or West longitude and '0' North or East (the flag is needed as
computers don't recognize a signed zero even though only the
Degrees value only is typically signed in DMS notation).
d, dec2dms 'Dec Degrees'
Returns 'Degrees' 'Minutes' 'Seconds' 'S/W'.
Values are as in dms2dec above.
E, dmmm2dec 'Degrees' 'Dec Minutes' 'S/W'
Returns 'Dec Degrees', a signed floating point value.
Degrees is an integer value and Minutes is a floating point
value. S/W is a flag with '1' indicating South latitude or West
longitude and '0' North or East (the flag is needed as computers
don't recognize a signed zero even though only the Degrees value
only is typically signed in DMS notation).
e, dec2dmmm 'Dec Deg'
Returns 'Degrees' 'Minutes' 'S/W'.
Values are as in dmmm2dec above.
B, qrb 'Lon 1' 'Lat 1' 'Lon 2' 'Lat 2'
Returns 'Distance' 'Azimuth' where Distance is in km and Azimuth
is in degrees.
All Lon/Lat values are signed floating point numbers.
A, a_sp2a_lp 'Short Path Deg'
Returns 'Long Path Deg' or -RIG_EINVAL upon input error..
Both are floating point values within the range 0.00 to 360.00.
a, d_sp2d_lp 'Short Path km'
Returns 'Long Path km'.
Both are floating point values.
PROTOCOL
Default Protocol
The rotctld protocol is intentionally simple. Commands are entered on a
single line with any needed values. In Perl, reliable results are
obtained by terminating each command string with a newline character,
'\n'.
Example set (Perl code):
print $socket "P 135 10\n";
print $socket "\\set_pos 135 10\n"; # escape leading '\'
A one line response will be sent as a reply to set commands, "RPRT x\n"
where x is the Hamlib error code with '0' indicating success of the
command.
Responses from rotctld get commands are text values and match the same
tokens used in the set commands. Each value is returned on its own
line. On error the string "RPRT x\n" is returned where x is the Hamlib
error code.
Example get (Perl code):
print $socket "p\n";
"135"
"10"
Most get functions return one to three values. A notable exception is
the \dump_caps function which returns many lines of key:value pairs.
This protocol is primarily used by the NET rotctl (rotctl model 2)
backend which allows applications already written for Hamlib's C API to
take advantage of rotctld without the need of rewriting application
code. An application's user can select rotor model 2 ("NET rotctl")
and then set rot_pathname to "localhost:4533" or other network
host:port (set by the -t option above).
Extended Response Protocol
An EXPERIMENTAL Extended Response protocol has been introduced into
rotctld as of February 10, 2010. This protocol adds several rules to
the strings returned by rotctld and adds a rule for the command syntax.
1. The command received by rotctld is echoed with its long command name
followed by the value(s) (if any) received from the client terminated
by the specified response separator as the first record of the
response.
2. The last record of each block is the string "RPRT x\n" where x is
the numeric return value of the Hamlib backend function that was called
by the command.
3. Any records consisting of data values returned by the rotor backend
are prepended by a string immediately followed by a colon then a space
and then the value terminated by the response separator. e.g. "Azimuth:
90.000000\n" when the command was prepended by '+'.
4. All commands received will be acknowledged by rotctld with records
from rules 1 and 2. Records from rule 3 are only returned when data
values must be returned to the client.
An example response to a +P command command sent from the shell prompt
(note the prepended '+'):
$ echo "+P 90 45" | nc -w 1 localhost 4533
set_pos: 90 45
RPRT 0
In this case the long command name and values are returned on the first
line and the second line contains the end of block marker and the
numeric rotor backend return value indicating success.
An example response to a +\get_pos query:
$ echo "+\get_pos" | nc -w 1 localhost 4533
get_pos:
Azimuth: 90.000000
Elevation: 45.000000
RPRT 0
In this case, as no value is passed to rotctld, the first line consists
only of the long command name. The final line shows that the command
was processed successfully by the rotor backend.
Invoking the Extended Response protocol requires prepending a command
with a punctuation character. As shown in the examples above, prepend‐
ing a '+' character to the command results in the responses being sepa‐
rated by a newline character ('\n'). Any other punctuation character
recognized by the C ispunct() function except '\', '?', or '_' will
cause that character to become the response separator and the entire
response will be on one line.
Separator character summary:
'+'
Each record of the response is appended with a newline ('\n').
';', '|', or ','
Each record of the response is appended by the given character
resulting in entire response on one line.
Common record separators for text representations of spreadsheet
data, etc.
'?'
Reserved for 'help' in rotctl short command
'_'
Reserved for \get_info short command
'#'
Reserved for comments when reading a command file script
Other punctuation characters have not been tested! Use at your
own risk.
For example, invoking a ;\get_pos query with a leading ';' returns:
get_pos:;Azimuth: 90.000000;Elevation: 45.000000;RPRT 0
Or, using the pipe character '|' returns:
get_pos:|Azimuth: 90.000000|Elevation: 45.000000|RPRT 0
And a \set_pos command prepended with a '|' returns:
set_pos: 135 22.5|RPRT 0
Such a format will allow reading a response as a single event using a
preferred response separator. Other punctuation characters have not
been tested!
All commands with the exception of \set_conf have been tested with the
Extended Response protocol and the included testrotctld.pl script.
EXAMPLES
Start rotctld for a Ham IV rotor with the RotorEZ installed using a
USB-to-serial adapter and backgrounding:
$ rotctld -m 401 -r /dev/ttyUSB1 &
Start rotctld for RotorEZ using COM2 on Win32:
$ rotctl -m 401 -r COM2
Connect to the already running rotctld, and set position to 135.0
degrees azimuth and 30.0 degrees elevation with a 1 second read timeout
from the shell prompt:
$ echo "\set_pos 135.0 30.0" | nc -w 1 localhost 4533
Connect to a running rotctld with rotctl on the local host:
$ rotctl -m2
DIAGNOSTICS
The -v, --version option allows different levels of diagnostics to be
output to stderr and correspond to -v for BUG, -vv for ERR, -vvv for
WARN, -vvvv for VERBOSE, or -vvvvv for TRACE.
A given verbose level is useful for providing needed debugging informa‐
tion to the email address below. For example, TRACE output shows all
of the values sent to and received from the rotator which is very use‐
ful for rotator backend library development and may be requested by the
developers. See the README.betatester and README.developer files for
more information.
SECURITY
No authentication whatsoever; DO NOT leave this TCP port open wide to
the Internet. Please ask if stronger security is needed or consider
using an SSH tunnel.
As rotctld does not need any greater permissions than rotctl, it is
advisable to not start rotctld as root or another system user account
in order to limit any vulnerability.
BUGS
The daemon is not detaching and backgrounding itself.
Much testing needs to be done.
REPORTING BUGS
Report bugs to <hamlib-developer@lists.sourceforge.net>.
We are already aware of the bugs in the previous section :-)
AUTHORS
Written by Stephane Fillod, Nate Bargmann, and the Hamlib Group
<http://www.hamlib.org>.
COPYRIGHT
Copyright © 2000-2009 Stephane Fillod
Copyright © 2011-2013 Nate Bargmann
Copyright © 2000-2009 the Hamlib Group.
This is free software; see the source for copying conditions. There is
NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
SEE ALSO
rotctl(1), hamlib(3)
Hamlib March 13, 2013 ROTCTLD(8)
[top]
List of man pages available for DragonFly
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
|
Vote for polarhome
|
