PERF-LIST(1) perf Manual PERF-LIST(1)NAMEperf-list - List all symbolic event types
SYNOPSIS
perf list [hw|sw|cache|tracepoint|event_glob]
DESCRIPTION
This command displays the symbolic event types which can be selected in
the various perf commands with the -e option.
EVENT MODIFIERS
Events can optionally have a modifer by appending a colon and one or
more modifiers. Modifiers allow the user to restrict when events are
counted with u for user-space, k for kernel, h for hypervisor.
Additional modifiers are G for guest counting (in KVM guests) and H for
host counting (not in KVM guests).
The p modifier can be used for specifying how precise the instruction
address should be. The p modifier is currently only implemented for
Intel PEBS and can be specified multiple times: 0 - SAMPLE_IP can have
arbitrary skid 1 - SAMPLE_IP must have constant skid 2 - SAMPLE_IP
requested to have 0 skid 3 - SAMPLE_IP must have 0 skid
The PEBS implementation now supports up to 2.
RAW HARDWARE EVENT DESCRIPTOR
Even when an event is not available in a symbolic form within perf
right now, it can be encoded in a per processor specific way.
For instance For x86 CPUs NNN represents the raw register encoding with
the layout of IA32_PERFEVTSELx MSRs (see [Intel® 64 and IA-32
Architectures Software Developer’s Manual Volume 3B: System Programming
Guide] Figure 30-1 Layout of IA32_PERFEVTSELx MSRs) or AMD’s
PerfEvtSeln (see [AMD64 Architecture Programmer’s Manual Volume 2:
System Programming], Page 344, Figure 13-7 Performance Event-Select
Register (PerfEvtSeln)).
Example:
If the Intel docs for a QM720 Core i7 describe an event as:
Event Umask Event Mask
Num. Value Mnemonic Description Comment
A8H 01H LSD.UOPS Counts the number of micro-ops Use cmask=1 and
delivered by loop stream detector invert to count
cycles
raw encoding of 0x1A8 can be used:
perf stat -e r1a8 -a sleep 1
perf record -e r1a8 ...
You should refer to the processor specific documentation for getting
these details. Some of them are referenced in the SEE ALSO section
below.
OPTIONS
Without options all known events will be listed.
To limit the list use:
1. hw or hardware to list hardware events such as cache-misses, etc.
2. sw or software to list software events such as context switches,
etc.
3. cache or hwcache to list hardware cache events such as
L1-dcache-loads, etc.
4. tracepoint to list all tracepoint events, alternatively use
subsys_glob:event_glob to filter by tracepoint subsystems such as
sched, block, etc.
5. If none of the above is matched, it will apply the supplied glob to
all events, printing the ones that match.
One or more types can be used at the same time, listing the events for
the types specified.
SEE ALSOperf-stat(1), perf-top(1), perf-record(1), Intel® 64 and IA-32
Architectures Software Developer’s Manual Volume 3B: System Programming
Guide[1], AMD64 Architecture Programmer’s Manual Volume 2: System
Programming[2]
NOTES
1. Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3B: System Programming Guide
http://www.intel.com/Assets/PDF/manual/253669.pdf
2. AMD64 Architecture Programmer’s Manual Volume 2: System Programming
http://support.amd.com/us/Processor_TechDocs/24593.pdf
perf 3.6.11-4.fc16.x8 01/08/2013 PERF-LIST(1)
