PCRE(3)PCRE(3)NAME
PCRE - Perl-compatible regular expressions
INTRODUCTION
The PCRE library is a set of functions that implement regular expres‐
sion pattern matching using the same syntax and semantics as Perl, with
just a few differences. Some features that appeared in Python and PCRE
before they appeared in Perl are also available using the Python syn‐
tax, there is some support for one or two .NET and Oniguruma syntax
items, and there is an option for requesting some minor changes that
give better JavaScript compatibility.
The current implementation of PCRE corresponds approximately with Perl
5.12, including support for UTF-8 encoded strings and Unicode general
category properties. However, UTF-8 and Unicode support has to be
explicitly enabled; it is not the default. The Unicode tables corre‐
spond to Unicode release 5.2.0.
In addition to the Perl-compatible matching function, PCRE contains an
alternative function that matches the same compiled patterns in a dif‐
ferent way. In certain circumstances, the alternative function has some
advantages. For a discussion of the two matching algorithms, see the
pcrematching page.
PCRE is written in C and released as a C library. A number of people
have written wrappers and interfaces of various kinds. In particular,
Google Inc. have provided a comprehensive C++ wrapper. This is now
included as part of the PCRE distribution. The pcrecpp page has details
of this interface. Other people's contributions can be found in the
Contrib directory at the primary FTP site, which is:
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre
Details of exactly which Perl regular expression features are and are
not supported by PCRE are given in separate documents. See the pcrepat‐
tern and pcrecompat pages. There is a syntax summary in the pcresyntax
page.
Some features of PCRE can be included, excluded, or changed when the
library is built. The pcre_config() function makes it possible for a
client to discover which features are available. The features them‐
selves are described in the pcrebuild page. Documentation about build‐
ing PCRE for various operating systems can be found in the README and
NON-UNIX-USE files in the source distribution.
The library contains a number of undocumented internal functions and
data tables that are used by more than one of the exported external
functions, but which are not intended for use by external callers.
Their names all begin with "_pcre_", which hopefully will not provoke
any name clashes. In some environments, it is possible to control which
external symbols are exported when a shared library is built, and in
these cases the undocumented symbols are not exported.
USER DOCUMENTATION
The user documentation for PCRE comprises a number of different sec‐
tions. In the "man" format, each of these is a separate "man page". In
the HTML format, each is a separate page, linked from the index page.
In the plain text format, all the sections, except the pcredemo sec‐
tion, are concatenated, for ease of searching. The sections are as fol‐
lows:
pcre this document
pcre-config show PCRE installation configuration information
pcreapi details of PCRE's native C API
pcrebuild options for building PCRE
pcrecallout details of the callout feature
pcrecompat discussion of Perl compatibility
pcrecpp details of the C++ wrapper
pcredemo a demonstration C program that uses PCRE
pcregrep description of the pcregrep command
pcrematching discussion of the two matching algorithms
pcrepartial details of the partial matching facility
pcrepattern syntax and semantics of supported
regular expressions
pcreperform discussion of performance issues
pcreposix the POSIX-compatible C API
pcreprecompile details of saving and re-using precompiled patterns
pcresample discussion of the pcredemo program
pcrestack discussion of stack usage
pcresyntax quick syntax reference
pcretest description of the pcretest testing command
In addition, in the "man" and HTML formats, there is a short page for
each C library function, listing its arguments and results.
LIMITATIONS
There are some size limitations in PCRE but it is hoped that they will
never in practice be relevant.
The maximum length of a compiled pattern is 65539 (sic) bytes if PCRE
is compiled with the default internal linkage size of 2. If you want to
process regular expressions that are truly enormous, you can compile
PCRE with an internal linkage size of 3 or 4 (see the README file in
the source distribution and the pcrebuild documentation for details).
In these cases the limit is substantially larger. However, the speed
of execution is slower.
All values in repeating quantifiers must be less than 65536.
There is no limit to the number of parenthesized subpatterns, but there
can be no more than 65535 capturing subpatterns.
The maximum length of name for a named subpattern is 32 characters, and
the maximum number of named subpatterns is 10000.
The maximum length of a subject string is the largest positive number
that an integer variable can hold. However, when using the traditional
matching function, PCRE uses recursion to handle subpatterns and indef‐
inite repetition. This means that the available stack space may limit
the size of a subject string that can be processed by certain patterns.
For a discussion of stack issues, see the pcrestack documentation.
UTF-8 AND UNICODE PROPERTY SUPPORT
From release 3.3, PCRE has had some support for character strings
encoded in the UTF-8 format. For release 4.0 this was greatly extended
to cover most common requirements, and in release 5.0 additional sup‐
port for Unicode general category properties was added.
In order process UTF-8 strings, you must build PCRE to include UTF-8
support in the code, and, in addition, you must call pcre_compile()
with the PCRE_UTF8 option flag, or the pattern must start with the
sequence (*UTF8). When either of these is the case, both the pattern
and any subject strings that are matched against it are treated as
UTF-8 strings instead of strings of 1-byte characters.
If you compile PCRE with UTF-8 support, but do not use it at run time,
the library will be a bit bigger, but the additional run time overhead
is limited to testing the PCRE_UTF8 flag occasionally, so should not be
very big.
If PCRE is built with Unicode character property support (which implies
UTF-8 support), the escape sequences \p{..}, \P{..}, and \X are sup‐
ported. The available properties that can be tested are limited to the
general category properties such as Lu for an upper case letter or Nd
for a decimal number, the Unicode script names such as Arabic or Han,
and the derived properties Any and L&. A full list is given in the
pcrepattern documentation. Only the short names for properties are sup‐
ported. For example, \p{L} matches a letter. Its Perl synonym, \p{Let‐
ter}, is not supported. Furthermore, in Perl, many properties may
optionally be prefixed by "Is", for compatibility with Perl 5.6. PCRE
does not support this.
Validity of UTF-8 strings
When you set the PCRE_UTF8 flag, the strings passed as patterns and
subjects are (by default) checked for validity on entry to the relevant
functions. From release 7.3 of PCRE, the check is according the rules
of RFC 3629, which are themselves derived from the Unicode specifica‐
tion. Earlier releases of PCRE followed the rules of RFC 2279, which
allows the full range of 31-bit values (0 to 0x7FFFFFFF). The current
check allows only values in the range U+0 to U+10FFFF, excluding U+D800
to U+DFFF.
The excluded code points are the "Low Surrogate Area" of Unicode, of
which the Unicode Standard says this: "The Low Surrogate Area does not
contain any character assignments, consequently no character code
charts or namelists are provided for this area. Surrogates are reserved
for use with UTF-16 and then must be used in pairs." The code points
that are encoded by UTF-16 pairs are available as independent code
points in the UTF-8 encoding. (In other words, the whole surrogate
thing is a fudge for UTF-16 which unfortunately messes up UTF-8.)
If an invalid UTF-8 string is passed to PCRE, an error return
(PCRE_ERROR_BADUTF8) is given. In some situations, you may already know
that your strings are valid, and therefore want to skip these checks in
order to improve performance. If you set the PCRE_NO_UTF8_CHECK flag at
compile time or at run time, PCRE assumes that the pattern or subject
it is given (respectively) contains only valid UTF-8 codes. In this
case, it does not diagnose an invalid UTF-8 string.
If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set,
what happens depends on why the string is invalid. If the string con‐
forms to the "old" definition of UTF-8 (RFC 2279), it is processed as a
string of characters in the range 0 to 0x7FFFFFFF. In other words,
apart from the initial validity test, PCRE (when in UTF-8 mode) handles
strings according to the more liberal rules of RFC 2279. However, if
the string does not even conform to RFC 2279, the result is undefined.
Your program may crash.
If you want to process strings of values in the full range 0 to
0x7FFFFFFF, encoded in a UTF-8-like manner as per the old RFC, you can
set PCRE_NO_UTF8_CHECK to bypass the more restrictive test. However, in
this situation, you will have to apply your own validity check.
General comments about UTF-8 mode
1. An unbraced hexadecimal escape sequence (such as \xb3) matches a
two-byte UTF-8 character if the value is greater than 127.
2. Octal numbers up to \777 are recognized, and match two-byte UTF-8
characters for values greater than \177.
3. Repeat quantifiers apply to complete UTF-8 characters, not to indi‐
vidual bytes, for example: \x{100}{3}.
4. The dot metacharacter matches one UTF-8 character instead of a sin‐
gle byte.
5. The escape sequence \C can be used to match a single byte in UTF-8
mode, but its use can lead to some strange effects. This facility is
not available in the alternative matching function, pcre_dfa_exec().
6. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly
test characters of any code value, but, by default, the characters that
PCRE recognizes as digits, spaces, or word characters remain the same
set as before, all with values less than 256. This remains true even
when PCRE is built to include Unicode property support, because to do
otherwise would slow down PCRE in many common cases. Note in particular
that this applies to \b and \B, because they are defined in terms of \w
and \W. If you really want to test for a wider sense of, say, "digit",
you can use explicit Unicode property tests such as \p{Nd}. Alterna‐
tively, if you set the PCRE_UCP option, the way that the character
escapes work is changed so that Unicode properties are used to deter‐
mine which characters match. There are more details in the section on
generic character types in the pcrepattern documentation.
7. Similarly, characters that match the POSIX named character classes
are all low-valued characters, unless the PCRE_UCP option is set.
8. However, the horizontal and vertical whitespace matching escapes
(\h, \H, \v, and \V) do match all the appropriate Unicode characters,
whether or not PCRE_UCP is set.
9. Case-insensitive matching applies only to characters whose values
are less than 128, unless PCRE is built with Unicode property support.
Even when Unicode property support is available, PCRE still uses its
own character tables when checking the case of low-valued characters,
so as not to degrade performance. The Unicode property information is
used only for characters with higher values. Furthermore, PCRE supports
case-insensitive matching only when there is a one-to-one mapping
between a letter's cases. There are a small number of many-to-one map‐
pings in Unicode; these are not supported by PCRE.
AUTHOR
Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.
Putting an actual email address here seems to have been a spam magnet,
so I've taken it away. If you want to email me, use my two initials,
followed by the two digits 10, at the domain cam.ac.uk.
REVISION
Last updated: 13 November 2010
Copyright (c) 1997-2010 University of Cambridge.
PCRE(3)
