patch man page on GhostBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
GhostBSD logo
[printable version]

PATCH(1)							      PATCH(1)

NAME
       patch - apply a diff file to an original

SYNOPSIS
       patch [options] [origfile [patchfile]] [+ [options] [origfile]]...

       but usually just

       patch <patchfile

DESCRIPTION
       Patch  will  take a patch file containing any of the four forms of dif‐
       ference listing produced by the diff program and	 apply	those  differ‐
       ences  to  an  original file, producing a patched version.  By default,
       the patched version is put in place of the original, with the  original
       file backed up to the same name with the extension ".orig" ("~" on sys‐
       tems that do not support long file names), or as specified  by  the  -b
       (--suffix),  -B	(--prefix),  or	 -V  (--version-control) options.  The
       extension used for making backup files may also	be  specified  in  the
       SIMPLE_BACKUP_SUFFIX  environment  variable, which is overridden by the
       above options.

       If the backup file already exists, patch creates a new backup file name
       by  changing  the  first	 lowercase letter in the last component of the
       file's name into uppercase.  If there are no more lowercase letters  in
       the  name,  it  removes	the first character from the name.  It repeats
       this process until it comes up with a backup file that does not already
       exist.

       You  may also specify where you want the output to go with a -o (--out‐
       put) option; if that file already exists, it is backed up first.

       If patchfile is omitted, or is a hyphen, the patch will	be  read  from
       standard	 input.	 If a -i argument is specified, the filename following
       it will be used, instead of standard input. You may specify only one -i
       directive.

       Upon  startup,  patch  will  attempt  to determine the type of the diff
       listing, unless over-ruled by a -c (--context), -e (--ed),  -n  (--nor‐
       mal),  or  -u (--unified) option.  Context diffs (old-style, new-style,
       and unified) and normal diffs are applied by the patch program  itself,
       while ed diffs are simply fed to the ed editor via a pipe.

       Patch  will  try	 to skip any leading garbage, apply the diff, and then
       skip any trailing garbage.  Thus you could feed an article  or  message
       containing  a diff listing to patch, and it should work.	 If the entire
       diff is indented by a  consistent  amount,  this	 will  be  taken  into
       account.

       With context diffs, and to a lesser extent with normal diffs, patch can
       detect when the line numbers mentioned in the patch are incorrect,  and
       will attempt to find the correct place to apply each hunk of the patch.
       As a first guess, it takes the line number mentioned for the hunk, plus
       or minus any offset used in applying the previous hunk.	If that is not
       the correct place, patch will scan both forwards and  backwards	for  a
       set of lines matching the context given in the hunk.  First patch looks
       for a place where all lines of the context match.  If no such place  is
       found, and it's a context diff, and the maximum fuzz factor is set to 1
       or more, then another scan takes place ignoring the first and last line
       of  context.  If that fails, and the maximum fuzz factor is set to 2 or
       more, the first two and last two lines  of  context  are	 ignored,  and
       another	scan  is  made.	  (The	default maximum fuzz factor is 2.)  If
       patch cannot find a place to install that hunk of the  patch,  it  will
       put  the	 hunk  out to a reject file, which normally is the name of the
       output file plus ".rej" ("#" on systems that do not support  long  file
       names).	 (Note	that  the  rejected hunk will come out in context diff
       form whether the input patch was a context diff or a normal  diff.   If
       the input was a normal diff, many of the contexts will simply be null.)
       The line numbers on the hunks in the reject file may be different  than
       in  the	patch file: they reflect the approximate location patch thinks
       the failed hunks belong in the new file rather than the old one.

       As each hunk is completed, you will be told whether the hunk  succeeded
       or  failed,  and	 which	line  (in the new file) patch thought the hunk
       should go on.  If this is different from the line number	 specified  in
       the  diff you will be told the offset.  A single large offset MAY be an
       indication that a hunk was installed in the wrong place.	 You will also
       be  told if a fuzz factor was used to make the match, in which case you
       should also be slightly suspicious.

       If no original file is specified on the command line, patch will try to
       figure  out  from the leading garbage what the name of the file to edit
       is.  In the header of a context diff, the file name is found from lines
       beginning  with	"***"  or "---", with the shortest name of an existing
       file winning.  Only context diffs have lines like that, but if there is
       an "Index:" line in the leading garbage, patch will try to use the file
       name from that line.  The context diff header takes precedence over  an
       Index  line.  If no file name can be intuited from the leading garbage,
       you will be asked for the name of the file to patch.

       If the original file cannot be found or is read-only,  but  a  suitable
       SCCS  or	 RCS file is handy, patch will attempt to get or check out the
       file.

       Additionally, if the leading garbage contains a "Prereq: " line,	 patch
       will  take  the first word from the prerequisites line (normally a ver‐
       sion number) and check the input file to see if that word can be found.
       If not, patch will ask for confirmation before proceeding.

       The  upshot  of	all this is that you should be able to say, while in a
       news interface, the following:

	    | patch -d /usr/src/local/blurfl

       and patch a file in the blurfl directory directly from the article con‐
       taining the patch.

       If the patch file contains more than one patch, patch will try to apply
       each of them as if they came from separate patch	 files.	  This	means,
       among  other  things,  that  it is assumed that the name of the file to
       patch must be determined for each diff listing, and  that  the  garbage
       before  each  diff listing will be examined for interesting things such
       as file names and revision level, as  mentioned	previously.   You  can
       give options (and another original file name) for the second and subse‐
       quent patches by separating the corresponding argument lists by a  '+'.
       (The  argument  list for a second or subsequent patch may not specify a
       new patch file, however.)

       Patch recognizes the following options:

       -b suff, --suffix=suff
	    causes suff to be interpreted as the backup extension, to be  used
	    in place of ".orig" or "~".

       -B pref, --prefix=pref
	    causes pref to be interpreted as a prefix to the backup file name.
	    If this argument is	 specified,  any  argument  from  -b  will  be
	    ignored.

       -c, --context
	    forces patch to interpret the patch file as a context diff.

       -C, --check
	    see what would happen, but don't do it.

       -d dir, --directory=dir
	    causes  patch to interpret dir as a directory, and cd to it before
	    doing anything else.

       -D sym, --ifdef=sym
	    causes patch  to  use  the	"#ifdef...#endif"  construct  to  mark
	    changes.  sym will be used as the differentiating symbol.

       -e, --ed
	    forces patch to interpret the patch file as an ed script.

       -E, --remove-empty-files
	    causes  patch  to  remove  output  files  that are empty after the
	    patches have been applied.

       -f, --force
	    forces patch to assume that the user knows exactly what he or  she
	    is doing, and to not ask any questions.  It assumes the following:
	    skip patches for which a file to patch can't be found; patch files
	    even  though  they have the wrong version for the ``Prereq:'' line
	    in the patch; and assume that patches are  not  reversed  even  if
	    they  look	like  they are.	 This option does not suppress commen‐
	    tary; use -s for that.

       -t, --batch
	    similar to -f, in that it suppresses  questions,  but  makes  some
	    different  assumptions:  skip  patches  for	 which a file to patch
	    can't be found (the same as -f); skip patches for which  the  file
	    has	 the  wrong version for the ``Prereq:'' line in the patch; and
	    assume that patches are reversed if they look like they are.

       -F number, --fuzz=number
	    sets the maximum fuzz factor.  This option only applies to context
	    diffs, and causes patch to ignore up to that many lines in looking
	    for places to install a hunk.  Note	 that  a  larger  fuzz	factor
	    increases  the odds of a faulty patch.  The default fuzz factor is
	    2, and it may not be set to more than the number of lines of  con‐
	    text in the context diff, ordinarily 3.

       -i patchfile
	    tells patch to apply patchfile instead of stdin.

       -I, --index-first
	    forces  patch to take ``Index:'' line precedence over context diff
	    header.  The same effect have PATCH_INDEX_FIRST environment	 vari‐
	    able if present.

       -l, --ignore-whitespace
	    causes  the	 pattern matching to be done loosely, in case the tabs
	    and spaces have been munged in your input file.  Any  sequence  of
	    whitespace	in  the	 pattern  line	will match any sequence in the
	    input file.	 Normal characters must	 still	match  exactly.	  Each
	    line of the context must still match a line in the input file.

       -n, --normal
	    forces patch to interpret the patch file as a normal diff.

       -N, --forward
	    causes  patch  to  ignore  patches	that it thinks are reversed or
	    already applied.  See also -R .

       -o file, --output=file
	    causes file to be interpreted as the output file name.

       -p[number], --strip[=number]
	    sets the pathname strip count, which controls how pathnames	 found
	    in	the  patch  file are treated, in case you keep your files in a
	    different directory than the person who sent out the  patch.   The
	    strip count specifies how many slashes are to be stripped from the
	    front of the pathname.  (Any intervening directory names  also  go
	    away.)  For example, supposing the file name in the patch file was

		 /u/howard/src/blurfl/blurfl.c

	    setting -p or -p0 gives the entire pathname unmodified, -p1 gives

		 u/howard/src/blurfl/blurfl.c

	    without the leading slash, -p4 gives

		 blurfl/blurfl.c

	    and not specifying -p at all just gives you "blurfl.c", unless all
	    of the directories in the leading path (u/howard/src/blurfl) exist
	    and	 that path is relative, in which case you get the entire path‐
	    name unmodified.  Whatever you end up with is looked for either in
	    the	 current  directory,  or  the  directory  specified  by the -d
	    option.

       -r file, --reject-file=file
	    causes file to be interpreted as the reject file name.

       -R, --reverse
	    tells patch that this patch was created with the old and new files
	    swapped.   (Yes,  I'm  afraid that does happen occasionally, human
	    nature being what it is.)  Patch will attempt to  swap  each  hunk
	    around  before  applying it.  Rejects will come out in the swapped
	    format.  The -R option will not work with ed diff scripts  because
	    there  is too little information to reconstruct the reverse opera‐
	    tion.

	    If the first hunk of a patch fails, patch will reverse the hunk to
	    see	 if  it can be applied that way.  If it can, you will be asked
	    if you want to have the -R option set.  If	it  can't,  the	 patch
	    will  continue  to be applied normally.  (Note: this method cannot
	    detect a reversed patch if it is a normal diff and	if  the	 first
	    command  is	 an  append  (i.e. it should have been a delete) since
	    appends always succeed, due to the fact that a null	 context  will
	    match  anywhere.  Luckily, most patches add or change lines rather
	    than delete them, so most reversed normal diffs will begin with  a
	    delete, which will fail, triggering the heuristic.)

       -s, --silent, --quiet
	    makes patch do its work silently, unless an error occurs.

       -S, --skip
	    causes  patch  to  ignore this patch from the patch file, but con‐
	    tinue on looking for the next patch in the file.  Thus

		 patch -S + -S + <patchfile

	    will ignore the first and second of three patches.

       -u, --unified
	    forces patch to interpret the patch file as a unified context diff
	    (a unidiff).

       -v, --version
	    causes patch to print out its revision header and patch level.

       -V method, --version-control=method
	    causes  method  to	be interpreted as a method for creating backup
	    file names.	 The type of backups made can also  be	given  in  the
	    VERSION_CONTROL  environment variable, which is overridden by this
	    option.  The -B option overrides this option, causing  the	prefix
	    to	always be used for making backup file names.  The value of the
	    VERSION_CONTROL environment variable and the argument  to  the  -V
	    option  are	 like  the  GNU Emacs `version-control' variable; they
	    also recognize synonyms that are more descriptive.	The valid val‐
	    ues are (unique abbreviations are accepted):

	    `t' or `numbered'
		   Always make numbered backups.

	    `nil' or `existing'
		   Make numbered backups of files that already have them, sim‐
		   ple backups of the others.  This is the default.

	    `never' or `simple'
		   Always make simple backups.

       -x number, --debug=number
	    sets internal debugging flags, and is of interest  only  to	 patch
	    patchers.

AUTHOR
       Larry Wall <lwall@netlabs.com>
       with many other contributors.

ENVIRONMENT
       TMPDIR Directory to put temporary files in; default is /tmp.

       SIMPLE_BACKUP_SUFFIX
	      Extension	 to  use  for  backup file names instead of ".orig" or
	      "~".

       VERSION_CONTROL
	      Selects when numbered backup files are made.

FILES
       $TMPDIR/patch*

SEE ALSO
       diff(1)

NOTES FOR PATCH SENDERS
       There are several things you should bear in mind if you are going to be
       sending	out  patches.	First,	you  can save people a lot of grief by
       keeping a patchlevel.h file which is patched  to	 increment  the	 patch
       level  as  the first diff in the patch file you send out.  If you put a
       Prereq: line in with the patch, it won't let them apply patches out  of
       order  without  some  warning.	Second, make sure you've specified the
       file names right, either in a context diff header, or  with  an	Index:
       line.  If you are patching something in a subdirectory, be sure to tell
       the patch user to specify a -p option as needed.	 Third, you can create
       a  file by sending out a diff that compares a null file to the file you
       want to create.	This will only work if the file	 you  want  to	create
       doesn't	exist  already in the target directory.	 Fourth, take care not
       to send out reversed patches, since it makes people wonder whether they
       already	applied	 the  patch.  Fifth, while you may be able to get away
       with putting 582 diff listings into one file, it is probably  wiser  to
       group  related  patches into separate files in case something goes hay‐
       wire.

DIAGNOSTICS
       Too many to list here, but generally  indicative	 that  patch  couldn't
       parse your patch file.

       The  message  "Hmm..."  indicates that there is unprocessed text in the
       patch file and that patch is attempting to intuit whether  there	 is  a
       patch in that text and, if so, what kind of patch it is.

       Patch  will  exit  with a non-zero status if any reject files were cre‐
       ated.  When applying a set of patches in a  loop	 it  behooves  you  to
       check  this exit status so you don't apply a later patch to a partially
       patched file.

CAVEATS
       Patch cannot tell if the line numbers are off in an ed script, and  can
       only  detect bad line numbers in a normal diff when it finds a "change"
       or a "delete" command.  A context diff using fuzz factor 3 may have the
       same  problem.	Until  a  suitable interactive interface is added, you
       should probably do a context diff in these cases to see if the  changes
       made sense.  Of course, compiling without errors is a pretty good indi‐
       cation that the patch worked, but not always.

       Patch usually produces the correct results, even when it has  to	 do  a
       lot  of	guessing.   However,  the results are guaranteed to be correct
       only when the patch is applied to exactly the same version of the  file
       that the patch was generated from.

BUGS
       Could be smarter about partial matches, excessively deviant offsets and
       swapped code, but that would take an extra pass.

       If code has been duplicated (for instance with #ifdef OLDCODE ... #else
       ...   #endif), patch is incapable of patching both versions, and, if it
       works at all, will likely patch the wrong one, and  tell	 you  that  it
       succeeded to boot.

       If  you	apply a patch you've already applied, patch will think it is a
       reversed patch, and offer to un-apply the patch.	 This  could  be  con‐
       strued as a feature.

				     LOCAL			      PATCH(1)
[top]

List of man pages available for GhostBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net