NUT-IPMIPSU(8) NUT Manual NUT-IPMIPSU(8)NAMEnut-ipmipsu - Driver for IPMI Power Supply Units (PSU)
SYNOPSISnut-ipmipsu-h
nut-ipmipsu-a PSU_NAME [OPTIONS]
Note
This driver is experimental, and still a work-in-progress. Feedback
is encouraged.
Note
This man page only documents the hardware-specific features of the
nut-ipmipsu driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
This driver should support a wide range of PSUs through local IPMI
interface.
nut-ipmipsu currently use the GNU FreeIPMI project, for IPMI
implementation.
EXTRA ARGUMENTS
This driver doesn’t support any optional settings.
INSTALLATION
This driver is not built by default. You can build it by using
"configure --with-ipmi=yes".
You also need to give proper permissions on the local IPMI device file
(/dev/ipmi0 for example) to allow the NUT user to access it.
An udev rules file (nut-ipmipsu.rules) is provided and automatically
installed on udev enabled system. This file is generally installed in
/etc/udev/rules.d/ or /lib/udev/rules.d/ on newer systems, to address
the permission settings problem. For more information, refer to
nut/scripts/udev/README.
INSTANT COMMANDS
This driver doesn’t support any instant commands.
IMPLEMENTATION
The "port" value is used to identify the PSU. For instance, to target
FRU 0x2, use the following in ups.conf:
[pdu]
driver = nut-ipmipsu
port = id2
This driver will report various information related to a PSU,
including:
· manufacturer, model, serial and part numbers,
· nominal voltage and frequency,
· actual current and voltage,
· status of the PSU:
· OL means that the PSU is present and providing power,
· OFF means that the PSU is present but not providing power
(power cable removed),
· stale (no data) means that the PSU is not present (ie
physically removed).
Here is an example output for a Dell r610 server:
device.mfr: DELL
device.mfr.date: 01/05/11 - 08:51:00
device.model: PWR SPLY,717W,RDNT
device.part: 0RN442A01
device.serial: CN179721130031
device.type: psu
driver.name: nut-ipmipsu
driver.parameter.pollinterval: 2
driver.parameter.port: id2
driver.version: 2.6.1-3139M
driver.version.data: IPMI PSU driver
driver.version.internal: 0.01
input.current: 0.20
input.frequency.high: 63
input.frequency.low: 47
input.voltage: 232.00
input.voltage.maximum: 264
input.voltage.minimum: 90
ups.id: 2
ups.realpower.nominal: 717
ups.status: OL
ups.voltage: 12
AUTHOR
Arnaud Quette <arnaud.quette@free.fr>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
GNU FreeIPMI home page: http://www.gnu.org/software/freeipmi/
Network UPS Tools 08/07/2012 NUT-IPMIPSU(8)