LOGGEN(1) The loggen manual page LOGGEN(1)NAMEloggen - Generate syslog messages at a specified rate
SYNOPSISloggen [options]target [port]
DESCRIPTION
NOTE: The loggen application is distributed with the syslog-ng system
logging application, and is usually part of the syslog-ng package. The
latest version of the syslog-ng application is available at the
official syslog-ng website[1].
This manual page is only an abstract; for the complete documentation of
syslog-ng, see The syslog-ng Administrator Guide[2].
The loggen application is tool to test and stress-test your syslog
server and the connection to the server. It can send syslog messages to
the server at a specified rate, using a number of connection types and
protocols, including TCP, UDP, and unix domain sockets. The messages
can be generated automatically (repeating the PADDstring over and
over), or read from a file or the standard input.
When loggen finishes sending the messages, it displays the following
statistics:
· average rate: Average rate the messages were sent in
messages/second.
· count: The total number of messages sent.
· time: The time required to send the messages in seconds.
· average message size: The average size of the sent messages in
bytes.
· bandwidth: The average bandwidth used for sending the messages in
kilobytes/second.
OPTIONS--active-connections <number-of-connections>
Number of connections loggen will use to send messages to the
destination. This option is usable only when using TCP or TLS
connections to the destination. Default value: 1
The loggen utility waits until every connection is established
before starting to to send messages. See also the
--idle-connections option.
--csv or -C
Send the statistics of the sent messages to stdout as CSV. This can
be used for plotting the message rate.
--dgram or -D
Use datagram socket (UDP or unix-dgram) to send the messages to the
target. Requires the --inet option as well.
--dont-parse or -d
Do not parse the lines read from the input files, send them as
received.
--help or -h
Display a brief help message.
--idle-connections <number-of-connections>
Number of idle connections loggen will establish to the
destination. Note that loggen will not send any messages on idle
connections, but the connection is kept open using keep-alive
messages. This option is usable only when using TCP or TLS
connections to the destination. See also the --active-connections
option. Default value: 0
--inet or -i
Use the TCP (by default) or UDP (when used together with the
--dgram option) protocol to send the messages to the target.
--interval <seconds> or -I <seconds>
The number of seconds loggen will run. Default value: 10
Note that when the --interval and --number are used together,
loggen will send messages until the period set in --interval
expires or the amount of messages set in --number is reached,
whichever happens first.
--permanent or -T
Send logs without time limit.
--ipv6 or -6
Specify the destination using its IPv6 address. Note that the
destination must have a real IPv6 address.
--loop-reading or -l
Read the file specified in --read-file option in loop: loggen will
start reading from the beginning of the file when it reaches the
end of the file.
--number <number-of-messages> or -n <number-of-messages>
Number of messages to generate.
Note that when the --interval and --number are used together,
loggen will send messages until the period set in --interval
expires or the amount of messages set in --number is reached,
whichever happens first.
--no-framing or -F
Do not use the framing of the IETF-syslog protocol style, even if
the syslog-proto option is set.
--quiet or -Q
Output statistics only when the execution of loggen is finished. If
not set, the statistics are displayed every second.
--rate <message/second> or -r <message/second>
The number of messages generated per second for every active
connection. Default value: 1000
--read-file <filename> or -R <filename>
Read the messages from a file and send them to the target. See also
the --skip-tokens option.
Specify - as the input file to read messages from the standard
input (stdio). Note that when reading messages from the standard
input, loggen can only use a single thread. The -R - parameters
must be placed at end of command, like: loggen 127.0.0.1 1061
--read-file -
Send the given sdata (e.g. "[test name=\"value\"]) in case of
syslog-proto
.PP --sdata <data-to-send> or -p <data-to-send>
Send the argument of the --sdata option as the SDATA part of
IETF-syslog (RFC5424 formatted) messages. Use it together with the
--syslog-proto option. For example: --sdata "[test name=\"value\"]
--size <message-size> or -s <message-size>
The size of a syslog message in bytes. Default value: 256. Minimum
value: 127 bytes, maximum value: 8192 bytes.
--skip-tokens <number>
Skip the specified number of space-separated tokens (words) at the
beginning of every line. For example, if the messages in the file
look like foo bar message, --skip-tokens 2 skips the foo bar part
of the line, and sends only the message part. Works only when used
together with the --read-file parameter. Default value: 3
--stream or -S
Use a stream socket (TCP or unix-stream) to send the messages to
the target.
--syslog-proto or -P
Use the new IETF-syslog message format as specified in RFC5424. By
default, loggen uses the legacy BSD-syslog message format (as
described in RFC3164). See also the --no-framing option.
--unix </path/to/socket> or -x </path/to/socket>
Use a UNIX domain socket to send the messages to the target.
--use-ssl or -U
Use an SSL-encrypted channel to send the messages to the target.
Note that it is not possible to check the certificate of the
target, or to perform mutual authentication.
--version or -V
Display version number of syslog-ng.
EXAMPLES
The following command generates 100 messages per second for ten
minutes, and sends them to port 2010 of the localhost via TCP. Each
message is 300 bytes long. loggen--size 300 --rate 100 --interval 600
127.0.0.1 2010.PP The following command is similar to the one above,
but uses the UDP protocol. loggen--inet --dgram --size 300 --rate 100
--interval 600 127.0.0.1 2010.PP Send a single message on TCP6 to the
::1 IPv6 address, port 1061: loggen--ipv6 --number 1 ::1 1061.PP Send
a single message on UDP6 to the ::1 IPv6 address, port 1061: loggen--ipv6 --dgram --number 1 ::1 1061.PP Send a single message using a
unix domain-socket: loggen--unix --stream --number 1
</path/to/socket>.PP Read messages from the standard input (stdio) and
send them to the localhost: loggen 127.0.0.1 1061 --read-file -.SH
"FILES"
/usr/local/bin/loggen
SEE ALSOsyslog-ng.conf(5)
The syslog-ng Administrator Guide[2]
If you experience any problems or need help with loggen or syslog-ng,
visit the syslog-ng mailing list[3]
The syslog-ng OSE 3.3 Administrator Guide[2]
If you experience any problems or need help with syslog-ng, visit visit
the syslog-ng wiki[4] or the syslog-ng mailing list[3].
For news and notifications about of syslog-ng, visit the syslog-ng
Insider Blog[5].
AUTHOR
This manual page was written by the BalaBit Documentation Team
<documentation@balabit.com>.
COPYRIGHT
The authors grant permission to copy, distribute and/or modify this
manual page under the terms of the GNU General Public License Version 2
or newer (GPL v2+).
NOTES
1. the official syslog-ng website
http://www.balabit.com/network-security/syslog-ng/
2. The syslog-ng Administrator Guide
http://www.balabit.com/support/documentation/
3. syslog-ng mailing list
https://lists.balabit.hu/mailman/listinfo/syslog-ng
4. visit the syslog-ng wiki
http://www.balabit.com/wiki/syslog-ng-faq
5. syslog-ng Insider Blog
http://insider.blogs.balabit.com
syslog-ng Open Source Edition 10/27/2015 LOGGEN(1)
