isovfy man page on Mandriva

Man page or keyword search:  
man Server   17060 pages
apropos Keyword Search (all sections)
Output format
Mandriva logo
[printable version]

ISOINFO(1)							    ISOINFO(1)

NAME
       devdump,	 isoinfo,  isovfy,  isodump - Utility programs for dumping and
       verifying iso9660 images.

SYNOPSIS
       devdump isoimage

       isodump isoimage

       isoinfo [ -d ] [ -h ] [ -R ] [ -J ] [ -j charset ] [ -f ] [ -l ] [ -p ]
       [ -T sector ] [ -N sector ] [ -i isoimage ] [ -x path ]

       isovfy isoimage

DESCRIPTION
       devdump	is  a  crude  utility to interactively display the contents of
       device or filesystem images.  The initial screen is a  display  of  the
       first  256  bytes  of the first 2048 byte sector.  The commands are the
       same as with isodump.

       isodump is a crude utility to interactively  display  the  contents  of
       iso9660	images	in  order  to verify directory integrity.  The initial
       screen is a display of the first part of the root  directory,  and  the
       prompt shows you the extent number and offset in the extent.

	      You  can use the 'a' and 'b' commands to move backwards and for‐
	      wards within the image. The 'g' command allows you  to  goto  an
	      arbitrary	 extent, and the 'f' command specifies a search string
	      to be used. The  '+'  command  searches  forward	for  the  next
	      instance of the search string, and the 'q' command exits devdump
	      or isodump.

       isoinfo is a utility to perform	directory  like	 listings  of  iso9660
       images.

       isovfy  is  a utility to verify the integrity of an iso9660 image. Most
       of the tests in isovfy were added after bugs were discovered  in	 early
       versions	 of  genisoimage.   It isn't all that clear how useful this is
       anymore, but it doesn't hurt to have this around.

OPTIONS
       The   options   common	to   all   programs   are   -help,-h,-version,
       i=name,dev=name.	  The  isoinfo	program	 has  additional  command line
       options. The options are:

       -help

       -h     print a summary of all options.

       -d     Print information from the primary volume	 descriptor  (PVD)  of
	      the  iso9660  image. This includes information about Rock Ridge,
	      Joliet extensions and Eltorito boot information if present.

       -f     generate output as if a 'find . -print' command had been run  on
	      the  iso9660  image. You should not use the -l image with the -f
	      option.

       -i iso_image
	      Specifies the path of the iso9660 image that we wish to examine.
	      The options -i and dev=target are mutual exclusive.

       dev=target
	      Sets  the SCSI target for the drive, see notes above.  A typical
	      device specification is dev=6,0 .	 If a filename	must  be  pro‐
	      vided  together  with  the  numerical  target specification, the
	      filename is implementation specific.  The	 correct  filename  in
	      this  case  can  be  found in the system specific manuals of the
	      target operating system.	On a FreeBSD system without  CAM  sup‐
	      port,  you need to use the control device (e.g.  /dev/rcd0.ctl).
	      A	 correct  device   specification   in	this   case   may   be
	      dev=/dev/rcd0.ctl:@ .

	      On Linux, drives connected to a parallel port adapter are mapped
	      to a virtual SCSI bus. Different adapters are mapped to  differ‐
	      ent targets on this virtual SCSI bus.

	      If  no  dev  option  is present, the program will try to get the
	      device from the CDR_DEVICE environment.

	      If the argument to the dev= option does not contain the  charac‐
	      ters  ',',  '/',	'@' or ':', it is interpreted as an label name
	      that may be found in the file /etc/wodim.conf  (see  FILES  sec‐
	      tion).

	      The options -i and dev=target are mutual exclusive.

       -l     generate	output	as  if	a 'ls -lR' command had been run on the
	      iso9660 image.  You should not use the  -f  image	 with  the  -l
	      option.

       -N sector
	      Quick hack to help examine single session disc files that are to
	      be written to a multi-session disc. The sector number  specified
	      is  the sector number at which the iso9660 image should be writ‐
	      ten when send to the cd-writer. Not used for the	first  session
	      on the disc.

       -p     Print path table information.

       -R     Extract  information from Rock Ridge extensions (if present) for
	      permissions, file names and ownerships.

       -J     Extract information from Joliet extensions (if present) for file
	      names.

       -j charset
	      Convert  Joliet file names (if present) to the supplied charset.
	      See genisoimage(8) for details.

       -T sector
	      Quick hack  to  help  examine  multi-session  images  that  have
	      already  been  burned to a multi-session disc. The sector number
	      specified is the sector number for the start of the  session  we
	      wish to display.

       -x pathname
	      Extract specified file to stdout.

AUTHOR
       The  author  of	the original sources (1993 ... 1998) is Eric Youngdale
       <ericy@gnu.ai.mit.edu> or <eric@andante.jic.com> is to blame for	 these
       shoddy hacks.  Joerg Schilling wrote the SCSI transport library and its
       adaptation layer to the programs and newer parts (starting  from	 1999)
       of  the	utilities,  this  makes	 them  Copyright  (C)  1999-2004 Joerg
       Schilling.  Patches  to	improve	 general  usability  would  be	gladly
       accepted.

       This manpage describes the program implementation of isoinfo as shipped
       by the cdrkit distribution. See	http://alioth.debian.org/projects/deb‐
       burn/  for  details. It is a spinoff from the original program distrib‐
       uted in the cdrtools package [1]. However, the cdrtools developers  are
       not involved in the development of this spinoff and therefore shall not
       be made responsible for any problem caused by it. Do  not  try  to  get
       support for this program by contacting the original author(s).

       If you have support questions, send them to

       debburn-devel@lists.alioth.debian.org

       If you have definitely found a bug, send a mail to this list or to

       submit@bugs.debian.org

       writing	at  least  a  short description into the Subject and "Package:
       cdrkit" into the first line of the mail body.

BUGS
       The user interface really sucks.

FUTURE IMPROVEMENTS
       These utilities are really quick	 hacks,	 which	are  very  useful  for
       debugging  problems  in genisoimage or in an iso9660 filesystem. In the
       long run, it would be nice to have a daemon that	 would	NFS  export  a
       iso9660 image.

       The  isoinfo program is probably the program that is of the most use to
       the general user.

AVAILABILITY
       These utilities come with the cdrkit package, and the primary  download
       site  is http://debburn.alioth.debian.org/ and FTP mirrors of distribu‐
       tions.  Despite the name, the software is not beta.

ENVIRONMENT
       CDR_DEVICE
	      This may either hold a device identifier that is suitable to the
	      open  call  of the SCSI transport library or a label in the file
	      /etc/wodim.conf.

       RSH    If the RSH environment is present, the  remote  connection  will
	      not be created via rcmd(3) but by calling the program pointed to
	      by RSH.  Use e.g.	 RSH=/usr/bin/ssh to  create  a	 secure	 shell
	      connection.

	      Note that this forces the program to create a pipe to the rsh(1)
	      program and disallows the program to directly access the network
	      socket to the remote server.  This makes it impossible to set up
	      performance parameters and slows down the connection compared to
	      a root initiated rcmd(3) connection.

       RSCSI  If the RSCSI environment is present, the remote SCSI server will
	      not  be  the  program  /opt/schily/sbin/rscsi  but  the  program
	      pointed  to  by RSCSI.  Note that the remote SCSI server program
	      name will be ignored if you log in using	an  account  that  has
	      been created with a remote SCSI server program as login shell.

FILES
       /etc/wodim.conf
	      Default	values	can  be	 set  for  the	following  options  in
	      /etc/wodim.conf.

	      CDR_DEVICE
		     This may either hold a device identifier that is suitable
		     to the open call of the SCSI transport library or a label
		     in the file /etc/wodim.conf that  allows  to  identify  a
		     specific drive on the system.

	      Any other label
		     is	 an  identifier	 for  a	 specific drive on the system.
		     Such an identifier may not contain	 the  characters  ',',
		     '/', '@' or ':'.

		     Each  line	 that follows a label contains a TAB separated
		     list of items.  Currently, four items are recognized: the
		     SCSI  ID  of  the drive, the default speed that should be
		     used for this drive, the default FIFO size that should be
		     used  for this drive and drive specific options. The val‐
		     ues for speed and fifosize may be set to -1 to  tell  the
		     program  to  use  the  global  defaults.	The  value for
		     driveropts may be set to "" if no driveropts are used.  A
		     typical line may look this way:

		     teac1= 0,5,0   4	 8m   ""

		     yamaha= 1,6,0  -1	 -1   burnfree

		     This  tells  the  program	that a drive named teac1 is at
		     scsibus 0, target 5, lun 0 and should be used with	 speed
		     4	and  a FIFO size of 8 MB.  A second drive may be found
		     at scsibus 1, target 6, lun 0 and uses the default	 speed
		     and the default FIFO size.

SEE ALSO
       genisoimage(1), wodim(1), readcd(1), ssh(1).

SOURCES
       [1] Cdrtools 2.01.01a08 from May 2006, http://cdrecord.berlios.de

Version 2.0			   04/06/01			    ISOINFO(1)
[top]

List of man pages available for Mandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net