IP-RULE(8) Linux IP-RULE(8)NAMEip-rule - routing policy database management
SYNOPSIS
ip [ OPTIONS ] rule { COMMAND | help }
ip rule [ list | add | del | flush ] SELECTOR ACTION
SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark
FWMARK[/MASK] ] [ iif STRING ] [ oif STRING ] [ pref NUMBER ]
ACTION := [ table TABLE_ID ] [ nat ADDRESS ] [ prohibit | reject |
unreachable ] [ realms [SRCREALM/]DSTREALM ]
TABLE_ID := [ local | main | default | NUMBER ]
DESCRIPTION
ip rule manipulates rules in the routing policy database control the
route selection algorithm.
Classic routing algorithms used in the Internet make routing decisions
based only on the destination address of packets (and in theory, but
not in practice, on the TOS field).
In some circumstances we want to route packets differently depending
not only on destination addresses, but also on other packet fields:
source address, IP protocol, transport protocol ports or even packet
payload. This task is called 'policy routing'.
To solve this task, the conventional destination based routing table,
ordered according to the longest match rule, is replaced with a 'rout‐
ing policy database' (or RPDB), which selects routes by executing some
set of rules.
Each policy routing rule consists of a selector and an action predi‐
cate. The RPDB is scanned in the order of increasing priority. The
selector of each rule is applied to {source address, destination
address, incoming interface, tos, fwmark} and, if the selector matches
the packet, the action is performed. The action predicate may return
with success. In this case, it will either give a route or failure
indication and the RPDB lookup is terminated. Otherwise, the RPDB pro‐
gram continues on the next rule.
Semantically, natural action is to select the nexthop and the output
device.
At startup time the kernel configures the default RPDB consisting of
three rules:
1. Priority: 0, Selector: match anything, Action: lookup routing
table local (ID 255). The local table is a special routing ta‐
ble containing high priority control routes for local and broad‐
cast addresses.
Rule 0 is special. It cannot be deleted or overridden.
2. Priority: 32766, Selector: match anything, Action: lookup rout‐
ing table main (ID 254). The main table is the normal routing
table containing all non-policy routes. This rule may be deleted
and/or overridden with other ones by the administrator.
3. Priority: 32767, Selector: match anything, Action: lookup rout‐
ing table default (ID 253). The default table is empty. It is
reserved for some post-processing if no previous default rules
selected the packet. This rule may also be deleted.
Each RPDB entry has additional attributes. F.e. each rule has a
pointer to some routing table. NAT and masquerading rules have an
attribute to select new IP address to translate/masquerade. Besides
that, rules have some optional attributes, which routes have, namely
realms. These values do not override those contained in the routing
tables. They are only used if the route did not select any attributes.
The RPDB may contain rules of the following types:
unicast - the rule prescribes to return the route found in the
routing table referenced by the rule.
blackhole - the rule prescribes to silently drop the packet.
unreachable - the rule prescribes to generate a 'Network is
unreachable' error.
prohibit - the rule prescribes to generate 'Communication is
administratively prohibited' error.
nat - the rule prescribes to translate the source address of
the IP packet into some other value.
ip rule add - insert a new rule
ip rule delete - delete a rule
type TYPE (default)
the type of this rule. The list of valid types was given in the
previous subsection.
from PREFIX
select the source prefix to match.
to PREFIX
select the destination prefix to match.
iif NAME
select the incoming device to match. If the interface is loop‐
back, the rule only matches packets originating from this host.
This means that you may create separate routing tables for for‐
warded and local packets and, hence, completely segregate them.
oif NAME
select the outgoing device to match. The outgoing interface is
only available for packets originating from local sockets that
are bound to a device.
tos TOS
dsfield TOS
select the TOS value to match.
fwmark MARK
select the fwmark value to match.
priority PREFERENCE
the priority of this rule. Each rule should have an explicitly
set unique priority value. The options preference and order are
synonyms with priority.
table TABLEID
the routing table identifier to lookup if the rule selector
matches. It is also possible to use lookup instead of table.
realms FROM/TO
Realms to select if the rule matched and the routing table
lookup succeeded. Realm TO is only used if the route did not
select any realm.
nat ADDRESS
The base of the IP address block to translate (for source
addresses). The ADDRESS may be either the start of the block of
NAT addresses (selected by NAT routes) or a local host address
(or even zero). In the last case the router does not translate
the packets, but masquerades them to this address. Using map-to
instead of nat means the same thing.
Warning: Changes to the RPDB made with these commands do not
become active immediately. It is assumed that after a script
finishes a batch of updates, it flushes the routing cache with
ip route flush cache.
ip rule flush - also dumps all the deleted rules.
This command has no arguments.
ip rule show - list rules
This command has no arguments. The options list or lst are synonyms
with show.
SEE ALSOip(8)AUTHOR
Original Manpage by Michail Litvak <mci@owl.openwall.com>
iproute2 20 Dec 2011 IP-RULE(8)