INJECT(1)INJECT(1)NAMEinject - inject a removable media device
SYNOPSISinject [ [ controller_id ] scsi_id [ lun ] | device | dir ]
DESCRIPTIONinject injects a removable mediad device. inject will only work with
CD-ROM or DVD-ROM drives.
Without any options, inject will act upon the first device it finds in
the hardware inventory table.
OPTIONS
device
Specify the device to inject. The device may be specified using any
of the names described in the mediad(1m) man page. Note that some
devices do not support software inject.
dir If mediad is running, the mount point of the filesystem on the disk
to be injected can be specified.
[controller_id] scsi_id
If mediad is running, the controller id and the scsi id of the
device to be injected can be specified. If the controller id is
left out, it will default to 0.
FILES
/dev/scsi/* generic SCSI devices (for CD-ROM drives)
/etc/fsd.tab table of devices monitored by mediad
ERRORS
An error will occur if the specified device already has media loaded.
EXAMPLESinject /dev/scsi/sc0d6l0 inject CD-ROM disk (controller 0 SCSI id 6)
SEE ALSOmediad(1M), mount(1M), umount(1M), ds(7M), smfd(7M)DIAGNOSTICS
The exit codes for inject have the following meanings:
0 : success
1 : Incorrect usage. Check the inject man page.
2 : The drive is busy. Make sure no programs are using the drive.
6 : No such device. Check your scsi id, fsname, or dir.
7 : A system error has occurred. See /var/adm/SYSLOG for more info.
14: Unable to inject. Try hardware inject.
Page 1
INJECT(1)INJECT(1)
Page 2