GIT-DAEMON(1) Git Manual GIT-DAEMON(1)NAMEgit-daemon - A really simple server for git repositories
SYNOPSISgit-daemon [--verbose] [--syslog] [--export-all]
[--timeout=n] [--init-timeout=n] [--strict-paths]
[--base-path=path] [--user-path | --user-path=path]
[--interpolated-path=pathtemplate]
[--reuseaddr] [--detach] [--pid-file=file]
[--enable=service] [--disable=service]
[--allow-override=service] [--forbid-override=service]
[--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]]
[directory...]
DESCRIPTION
A really simple TCP git daemon that normally listens on port
"DEFAULT_GIT_PORT" aka 9418. It waits for a connection asking for a
service, and will serve that service if it is enabled.
It verifies that the directory has the magic file
"git-daemon-export-ok", and it will refuse to export any git directory
that hasn't explicitly been marked for export this way (unless the
--export-all parameter is specified). If you pass some directory paths
as git-daemon arguments, you can further restrict the offers to a
whitelist comprising of those.
By default, only upload-pack service is enabled, which serves
git-fetch-pack and git-ls-remote clients, which are invoked from
git-fetch, git-pull, and git-clone.
This is ideally suited for read-only updates, i.e., pulling from git
repositories.
An upload-archive also exists to serve git-archive.
OPTIONS--strict-paths
Match paths exactly (i.e. don't allow "/foo/repo" when the real
path is "/foo/repo.git" or "/foo/repo/.git") and don't do
user-relative paths. git-daemon will refuse to start when this
option is enabled and no whitelist is specified.
--base-path
Remap all the path requests as relative to the given path. This
is sort of "GIT root" - if you run git-daemon with
--base-path=/srv/git on example.com, then if you later try to
pull git://example.com/hello.git, git-daemon will interpret the
path as /srv/git/hello.git.
--base-path-relaxed
If --base-path is enabled and repo lookup fails, with this
option git-daemon will attempt to lookup without prefixing the
base path. This is useful for switching to --base-path usage,
while still allowing the old paths.
--interpolated-path=pathtemplate
To support virtual hosting, an interpolated path template can be
used to dynamically construct alternate paths. The template
supports %H for the target hostname as supplied by the client
but converted to all lowercase, %CH for the canonical hostname,
%IP for the server's IP address, %P for the port number, and %D
for the absolute path of the named repository. After
interpolation, the path is validated against the directory
whitelist.
--export-all
Allow pulling from all directories that look like GIT
repositories (have the objects and refs subdirectories), even if
they do not have the git-daemon-export-ok file.
--inetd
Have the server run as an inetd service. Implies --syslog.
Incompatible with --port, --listen, --user and --group options.
--listen=host_or_ipaddr
Listen on an a specific IP address or hostname. IP addresses can
be either an IPv4 address or an IPV6 address if supported. If
IPv6 is not supported, then --listen=hostname is also not
supported and --listen must be given an IPv4 address.
Incompatible with --inetd option.
--port=n
Listen on an alternative port. Incompatible with --inetd option.
--init-timeout
Timeout between the moment the connection is established and the
client request is received (typically a rather low value, since
that should be basically immediate).
--timeout
Timeout for specific client sub-requests. This includes the time
it takes for the server to process the sub-request and time
spent waiting for next client's request.
--syslog
Log to syslog instead of stderr. Note that this option does not
imply --verbose, thus by default only error conditions will be
logged.
--user-path, --user-path=path
Allow user notation to be used in requests. When specified with
no parameter, requests to git://host/alice/foo is taken as a
request to access foo repository in the home directory of user
alice. If --user-path=path is specified, the same request is
taken as a request to access path/foo repository in the home
directory of user alice.
--verbose
Log details about the incoming connections and requested files.
--reuseaddr
Use SO_REUSEADDR when binding the listening socket. This allows
the server to restart without waiting for old connections to
time out.
--detach
Detach from the shell. Implies --syslog.
--pid-file=file
Save the process id in file. Ignored when the daemon is run
under --inetd.
--user=user, --group=group
Change daemon's uid and gid before entering the service loop.
When only --user is given without --group, the primary group ID
for the user is used. The values of the option are given to
getpwnam(3) and getgrnam(3) and numeric IDs are not supported.
Giving these options is an error when used with --inetd; use the
facility of inet daemon to achieve the same before spawning
git-daemon if needed.
--enable=service, --disable=service
Enable/disable the service site-wide per default. Note that a
service disabled site-wide can still be enabled per repository
if it is marked overridable and the repository enables the
service with an configuration item.
--allow-override=service, --forbid-override=service
Allow/forbid overriding the site-wide default with per
repository configuration. By default, all the services are
overridable.
<directory>
A directory to add to the whitelist of allowed directories.
Unless --strict-paths is specified this will also include
subdirectories of each named directory.
SERVICES
These services can be globally enabled/disabled using the command line
options of this command. If a finer-grained control is desired (e.g. to
allow git-archive to be run against only in a few selected repositories
the daemon serves), the per-repository configuration file can be used
to enable or disable them.
upload-pack
This serves git-fetch-pack and git-ls-remote clients. It is
enabled by default, but a repository can disable it by setting
daemon.uploadpack configuration item to false.
upload-archive
This serves git-archive --remote. It is disabled by default, but
a repository can enable it by setting daemon.uploadarch
configuration item to true.
receive-pack
This serves git-send-pack clients, allowing anonymous push. It
is disabled by default, as there is no authentication in the
protocol (in other words, anybody can push anything into the
repository, including removal of refs). This is solely meant for
a closed LAN setting where everybody is friendly. This service
can be enabled by daemon.receivepack configuration item to true.
EXAMPLES
We assume the following in /etc/services
$ grep 9418 /etc/services
git 9418/tcp # Git Version Control System
git-daemon as inetd server
To set up git-daemon as an inetd service that handles any
repository under the whitelisted set of directories, /pub/foo
and /pub/bar, place an entry like the following into /etc/inetd
all on one line:
git stream tcp nowait nobody /usr/bin/git-daemon
git-daemon--inetd --verbose --export-all
/pub/foo /pub/bar
git-daemon as inetd server for virtual hosts
To set up git-daemon as an inetd service that handles
repositories for different virtual hosts, www.example.com and
www.example.org, place an entry like the following into
/etc/inetd all on one line:
git stream tcp nowait nobody /usr/bin/git-daemon
git-daemon--inetd --verbose --export-all
--interpolated-path=/pub/%H%D
/pub/www.example.org/software
/pub/www.example.com/software
/software
In this example, the root-level directory /pub will contain a
subdirectory for each virtual host name supported. Further, both
hosts advertise repositories simply as
git://www.example.com/software/repo.git. For pre-1.4.0 clients,
a symlink from /software into the appropriate default repository
could be made as well.
git-daemon as regular daemon for virtual hosts
To set up git-daemon as a regular, non-inetd service that
handles repositories for multiple virtual hosts based on their
IP addresses, start the daemon like this:
git-daemon--verbose --export-all
--interpolated-path=/pub/%IP/%D
/pub/192.168.1.200/software
/pub/10.10.220.23/software
In this example, the root-level directory /pub will contain a
subdirectory for each virtual host IP address supported.
Repositories can still be accessed by hostname though, assuming
they correspond to these IP addresses.
selectively enable/disable services per repository
To enable git-archive --remote and disable git-fetch against a
repository, have the following in the configuration file in the
repository (that is the file config next to HEAD, refs and
objects).
[daemon]
uploadpack = false
uploadarch = true
AUTHOR
Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki
<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org>
DOCUMENTATION
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
GIT
Part of the git(7) suite
Git 1.5.5.2 10/21/2008 GIT-DAEMON(1)