fdcontrol man page on GhostBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
GhostBSD logo
[printable version]

FDCONTROL(8)		  BSD System Manager's Manual		  FDCONTROL(8)

NAME
     fdcontrol — display and modify floppy disk parameters

SYNOPSIS
     fdcontrol [-F] [-d dbg] [-f fmt] [-s fmtstr] [-v] device

DESCRIPTION
     The fdcontrol utility allows the modification of the run-time behavior of
     the fdc(4) driver for the device specified by device.

     Commands are implemented to query the current device density settings as
     well as the underlying device hardware as registered with the driver, to
     manipulate debugging levels, and to adjust the device density settings.
     All the operations that manipulate the kernel settings are restricted to
     the superuser (by the device driver), while all inquiry requests only
     require read access to device.

     The device argument should always be given as a full path name, e.g.
     /dev/fd0.

   Inquiry Commands
     Running the fdcontrol utility without any of the optional flags will
     report the drive type that is registered with the device driver.  In the
     shortest form, a single string describing the drive type will be
     returned.	Possible values are: “360K”, “1.2M”, “720K”, “1.44M”, “2.88M”,
     or “unknown”.  This information is primarily intended to be easily
     parsable by scripts.

     In order to add some descriptive text that makes the output better human
     readable, the flag -v can be added.

     Specifying flag -F will report the device's density settings in a form
     that is suitable as input to the -s fmtstr option (see below).  Again,
     together with -v, some more text will be returned, including the total
     capacity of the density settings in kilobytes.

   Debug Control
     If the fdc(4) driver was configured with the FDC_DEBUG option, by
     default, device debugging information is still disabled since it could
     produce huge amounts of kernel messages.  It needs to be turned on using
     fdcontrol together with “-d 1”, usually immediately before starting an
     operation on the respective device the debug information is wanted for,
     and later turned off again using “-d 0”.  Note that debugging levels are
     a driver's global option that will affect any drives and controllers
     using the fdc(4) driver, regardless which device was specified on the
     fdcontrol command line.

   Density Control
     The fdc(4) control utilities support two different options how to specify
     device density settings.  The first form uses -f fmt to specify the for‐
     mat of the medium in kilobytes.  Depending on the underlying drive type,
     the value is compared against a table of known commonly used device den‐
     sity settings for that drive, and if a match is found, those settings
     will be used.  Currently, the following values for the respective drive
     types are acceptable:

     2.88M and 1.44M drives:
	   KB	  sectrac   secsize   ncyls   speed   heads   flags
	   1721	  21	    2 (512)   82      500     2	      MFM
	   1476	  18	    2 (512)   82      500     2	      MFM
	   1440	  18	    2 (512)   80      500     2	      MFM
	   1200	  15	    2 (512)   80      500     2	      MFM
	    820	  10	    2 (512)   82      250     2	      MFM

	    800	  10	    2 (512)   80      250     2	      MFM
	    720	  9	    2 (512)   80      250     2	      MFM

     1.2M drives:
	   KB	  sectrac   secsize    ncyls   speed   heads   flags
	   1200	  15	    2 (512)    80      500     2       MFM
	   1232	  8	    3 (1024)   77      500     2       MFM
	   1476	  18	    2 (512)    82      500     2       MFM
	   1440	  18	    2 (512)    80      500     2       MFM
	   1200	  15	    2 (512)    80      500     2       MFM
	    820	  10	    2 (512)    82      300     2       MFM
	    800	  10	    2 (512)    80      300     2       MFM
	    720	  9	    2 (512)    80      300     2       MFM
	    360	  9	    2 (512)    40      300     2       MFM,2STEP
	    640	  8	    2 (512)    80      300     2       MFM

     720K drives:
	   KB	 sectrac   secsize   ncyls   speed   heads   flags
	   720	 9	   2 (512)   80	     250     2	     MFM

     360K drives:
	   KB	 sectrac   secsize   ncyls   speed   heads   flags
	   360	 9	   2 (512)   40	     250     2	     MFM

     The second form to specify a device density uses -s fmtstr to explicitly
     specify each parameter in detail.	The argument fmtstr is a comma-sepa‐
     rated list of values of the form:

     sectrac,secsize,datalen,gap,ncyls,speed,heads,f_gap,f_inter,offs2,flags

     The meaning of the parameters is:

     sectrac  The number of sectors per track.

     secsize  The sector size code, 0 = 128 bytes (or less), 1 = 256 bytes, 2
	      = 512 bytes, 3 = 1024 bytes.

     datalen  The actual sector size if the size code is 0, or the (ignored)
	      value 0xFF for larger size codes.

     gap      The length of the gap 3 parameter for read/write operations.

     ncyls    The number of cylinders.

     speed    The transfer speed in kilobytes per second.  Can be 250, 300,
	      500, or 1000, but each drive type only supports a subset of
	      these values.

     heads    The number of heads.

     f_gap    The length of the gap 3 when formatting media.

     f_inter  The sector interleave to be applied when formatting.  0 means no
	      interleave, 1 means 1:1 etc.

     offs2    The offset of the sector numbers on side 2 (i.e., head number
	      1).  Normally, sector numbering on both sides starts with 1.

     flags    A list from one of the following flag values:

	      +mfm	Use MFM encoding.
	      -mfm	Use FM (single-density) encoding.
	      +2step	Use 2 steps per each cylinder (for accessing 40-cylin‐
			der media in 80-cylinder drives).
	      -2step	Do not use 2 steps per cylinder, i.e., access each
			physical cylinder of the drive.
	      +perpend	Use perpendicular recording (for 2.88 MB media, cur‐
			rently not supported).
	      -perpend	Use longitudinal recording.

     For any missing parameter, the current value will be used, so only actual
     changes need to be specified.  Thus to turn off a flag bit (like +mfm
     which is the default for all drive types), the form with a leading minus
     sign must explicitly be used.

EXAMPLES
     A simple inquiry about the drive type:

	   $ fdcontrol /dev/fd0
	   1.44M

     Same as above, but with verbose output.  Note that the result is about
     the drive type, as opposed to a device density, so it is independent from
     the actual subdevice being used for device.

	   $ fdcontrol -v /dev/fd0
	   /dev/fd0: 1.44M drive (3.5" high-density)

     Inquiry about the density settings:

	   $ fdcontrol -F /dev/fd0
	   18,512,0xff,0x1b,80,500,2,0x6c,1,0,+mfm

     The verbose flag makes this human readable:

	   /dev/fd0: 1440 KB media type
		   Format:	   18,512,0xff,0x1b,80,500,2,0x6c,1,0,+mfm
		   Sector size:	   512
		   Sectors/track:  18
		   Heads/cylinder: 2
		   Cylinders/disk: 80
		   Transfer rate:  500 kbps
		   Sector gap:	   27
		   Format gap:	   108
		   Interleave:	   1
		   Side offset:	   0
		   Flags	   <MFM>

     As indicated, trailing commas in the parameter list may be omitted.

     In order to access archaic 160 KB single-density (FM encoded) 5.25 media
     in a modern 1.2M drive, something like the following definition would be
     needed.  (Note that not all controller hardware is actually capable of
     handling FM encoding at all.)

     # fdcontrol -s 16,128,0x80,0x2,40,300,,0x10,,,-mfm,+2step /dev/fd1.1

     It is still possible to hook up 8" drives to most modern floppy con‐
     trollers, given the right cable magic.  (On PC hardware, tell the BIOS
     that it is a 5.25" drive.)	 The classical 128/26/2/77 format can be read
     with this entry

	   fdcontrol -s	 26,128,0x80,0x2,77,500,2,0x10,,,-mfm /dev/fd0

SEE ALSO
     fdc(4)

HISTORY
     The fdcontrol utility appeared in FreeBSD 2.0, and was vastly overhauled
     in FreeBSD 5.0.

AUTHORS
     The program and this man page was contributed by Jörg Wunsch, Dresden.

BSD			       December 25, 2001			   BSD
[top]

List of man pages available for GhostBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net