EDITSS(6)EDITSS(6)NAMEeditss itor for XPilot shipshapes. (V2.1)
SYNOPSISeditss [" shipshape "]
DESCRIPTIONeditss is a utility for designing XPilot shipshapes. The use of this
editor is simple and straightforward. Shipshapes can be supplied on
the command line, or retrieved from the user .xpilotrc or shipshape
file. After editing, the shipshape can be printed on the command line,
or added to the .xpilotrc or shipshape file. Ship library files can be
printed on a PostScript printer. As of version 2.0, the new shipshape
format for XPilot version 3.2.0 is fully supported.
OPTIONS
An XPilot shipshape can be specified on the command line as an option,
enclosed in double quotes. The format used here is the normal XPilot
format for shipshapes.
EDITING YOUR SHIP
You can edit the shipshape in the window with the grid and crosshairs.
In this window: press the left mouse button (LMB) to perform an action,
or the right mouse button (RMB) to cancel.
The ship should be drawn with the nose to the right, unless you wish to
confuse your enemies (and yourself! :-) ). You should alse specify the
MainGun (where bullets will shoot from), and the Engine.
You should follow these rules: (xpilot version 3.2.0)
1) each ship should have at least three different points and not more
than 16 points.
2) at least one point should be eight or more pixels left from the
origin.
3) at least one point should be eight or more pixels right from the
origin.
4) at least one point should be eight or more pixels above the ori‐
gin.
5) at least one point should be eight or more pixels below the ori‐
gin.
6) at least three points should be eight or more pixels away from the
origin.
7) no point should be more than 15 points away from the x- or y-
axis.
8) attributes like guns, lights etc. should be placed in (or on) the
ship.
9) the width and height of the ship should add up to at least 38. As
of Xpilot version 3.2.0 this restriction is not yet enforced.
Only a warning will be generated. Later Xpilot versions will
probably enforce this rule.
The rectangle on the grid is eight points from the origin.
The Draw mode works as follows. If there are no points yet, you can
use the LMB to add points. Every new point is connected to the previ‐
ous point. Press the RMB to stop adding points (You do not have to
"close" the shipshape ).
In this mode you can drag lines and attributes around. If you select
with the LMB, you will pick up the topmost shipshape point and all
attributes you are pointing to. If you use the RMB, you will only pick
up the topmost attribute.
Kill mode: If you use the LMB to select a position on the grid, the
topmost shipshape point here (if any) will be removed. All attributes
at the selected gridpoint will be removed as well. If you use the RMB,
only the topmost attribute here will be removed.
In the Split mode, you can select a line with the LMB. This line will
be divided into two lines, and then you can position the dividing
point. After the dividing point is placed with the LMB, the mode will
change to Draw.
To add attributes, simply press the button of the attribute you wish to
add. Press the LMB on the grid position where you want the attribute.
possible attributes are:
Mgun the main gun. You must place this attribute.
engine you must place this attribute as well.
Llight a flashing navigation light (flashes Red). Use up to 3 of
these
Rlight blue or right navigation light. Use up to 3.
Lgun additional guns for wideshots. Up to 3 of these can be
placed on the left side of your ship.
Rgun additional guns for the right side of your ship. Use up to
3.
mrack a missile rack. Missiles will be fired from each of these
racks in turn. You can use up to 4 of these.
The ship is displayed below the buttons, more or less as it appears in
XPilot. The number of points on your ship is also displayed. Below
this is a box announcing any problems with your design. All bugs in
your ship should be removed before you will be able to save or print
the ship.
IMPORTING / EXPORTING SHIPSHAPES
You can specify a shipshape on the commandline when starting editss
(see OPTIONS). You can also use the Load button to retrieve shipshapes
from your ship from your shipshape library file, if it exists. If you
double click (LMB) on a ship in the directory (the leftmost part of the
Editss window), that ship will be loaded. Anything you were editing
will be lost.
If you press the Type button, editss will print the shipshape on the
command line . You can give this shipshape to xpilot as follows:
xpilot -shipShape " shipshape "
Xpilot will start and use your new shipshape.
If you use the Save button, editss will append the shape and name of
your ship to the shiplib.
You can specify a shipshape library file. If you type the name of a
file and then press ENTER, the contents of this file will be shown in
the leftmost part of the Editss window. To specify a default library
file, see below.
BUTTON FUNCTIONS
Quit quit the program.
Type print the shipshape on the command line.
Save write the shipshape to the library file.
Load load the shipshape with the soecified name from the library
file.
Clear clear the shipshape.
Print print the ships in the current shipshape library file in
PostScript format into the file [shiplibname].ps
Draw draw or drag points.
Kill remove points.
Split split a line, adding an extra point.
Mgun Set the MainGun.
Lgun Set left side extra guns.
Rgun Set right side extra guns.
Llight Set left navigation lights.
Rlight Set right navigation light.
mrack Set missile racks.
engine Set the engine point.
RESOURCE FILE
You can specify a number of defaults to Editss, by making a file named
buttonbox_border (integer) borderwidth of boxes
value_border (integer) borderwidth of value widgets
buttonbox_f (string) foreground color of boxes
buttonbox_b (string) background color of boxes
status_f/b (string) statusbar colors
button_high_f/b (string) highlight button colors
button_toggle_f/b (string) toggle button colors
button_actions_f/b (string) button colors
smallfont (string) font for status bars
shiplib (string) default shipshape library
SEE ALSOxpilot(6), xpilots(6)
august 1994 EDITSS(6)
