BTOOL(1)BTOOL(1)NAMEbtool - Barry Project's program to interface with BlackBerry handheld
SYNOPSISbtool [-B busname][-N devname][-a db][-c dn][-C dnattr][-d db [-f
file][-r#][-R#]-D#]][-h][-l][-L][-m cmd][-M][-p pin][-P password][-s db
-f file][-S][-t][-v][-X][-z][-Z]
DESCRIPTIONbtool is a program that communicates with a BlackBerry device over USB;
there is no intention to support ancient serial-port BlackBerries.
Since the protocols used by BlackBerry are not documented by the manu‐
facturer Research In Motion, this program is experimental and you use
at own risk. Be sure your device is backed up by another program if it
contains important data.
OPTIONS-B busname
Specify the USB bus to search for Blackberry devices on. This
is the first number displayed in the output from the lsusb com‐
mand, such as 002. If the busname is numeric on your system, 2
and 002 are equal. See also the -N option, which can be used
together with this option to precisely select the device to work
with.
-a db Delete all records from specified database. This can be used
multiple times to clear multiple databases.
-c dn Convert address book database to LDIF format, using the speci‐
fied dn as the baseDN. Sends LDIF output to stdout.
-C dnattr
Spcify LDIF attribute name to use when building the FQDN in the
dn attribute. Defaults to 'cn'. If you modify the mapping with
the -m switch, make sure that the new dnattr exists.
-d db Load database 'db' FROM device and dump to stdout. Can be used
multiple times to fetch more than one database. See the -t
option for a list of device databases.
-e epp Override endpoint pair detection. 'epp' is a single string sep‐
arated by a comma, holding the read,write endpoint pair.
Example: -e 83,5
Note: Endpoints are specified in hex. Use the same numbers
given by the lsusb -v output.
You should never need to use this option, as endpoints are
autodetected.
-f file
Filename to write or read handheld data to/from. Used in con‐
junction with the -d and -s options, respectively. Note: the
file format of this file is not backward compatible between
devel releases.
-i charset
Specifies the iconv charset to use for converting international
strings. The Blackberry uses the WINDOWS-1252 charset, which is
incompatible with the more common code pages used in Linux. The
most useful charset to use with this option is UTF-8, and is
highly recommended. Any other charset available via 'iconv
--list' can be used here too, but may not be successful for some
character conversions.
-l Lists attached Blackberry devices, and their PIN numbers.
-L List Contact field names. Each name represents a contact field
that the Barry library recognizes. Use these names with the -m
option to adjust the LDIF name to field mapping.
-m command
Map LDIF name to Contact field, or unmap LDIF name. To map a
new or existing LDIF attribute name to a Barry contact field,
use the format 'ldif,read,write' where ldif represents the name
of the attribute to map, read is the contact field name used to
read data from the record, and write is the contact field name
used to write data to the record.
To unmap an LDIF name, specify the LDIF attribute alone.
For example, to map a new LDIF attribute called "strange" to
read from FirstName and write to LastName, use:
-m strange,FirstName,LastName
The -m option can be specified multiple times to create the
desired mapping.
-M List current LDIF mapping to stdout.
-N devname
Specify the USB device name. This is the second number dis‐
played in the output from the lsusb command, such as 005. If
the device name is numeric on your system, 5 and 005 are equal.
See also the -B option.
-p pin PIN of device to talk with. Only needed if you have more than
one Blackberry connected at once.
-P password
Simplistic method to specify device password. In a real appli‐
cation, this would be done using a more secure prompt.
-s db Save database 'db' TO device from data loaded from -f file. See
the -t option for a list of device databases.
-S Show list of supported database parsers and builders. Parsers
are used when reading data out of the device, and builders are
used when writing data to the device. If a parser is supported,
but its associated builder is not, that means you cannot change
the database programmatically, such as with the -s option.
-t Show device's database table.
-T db Show record state table for given database.
-v Dump verbose protocol data during operation.
-X Reset device.
-z Use non-threaded sockets when communicating with the device.
This is the behaviour seen in versions 0.12 and earlier, since
threads were not yet supported. This option, along with -Z, are
for debugging and testing.
-Z Use a threaded socket router when communicating with the device.
This is the default for btool. This option, along with -Z, are
for debugging and testing.
-h, --help
Show summary of options.
DATABASE COMMAND MODIFIERS
The following options modify the -d command option above, and can be
used multiple times for more than one record.
-r # Fetch specific record, given a record index number as seen in
the -T state table. Can be used multiple times to fetch spe‐
cific records from a single database.
-R # Same as -r, but also clears the record's dirty flags.
-D # Delete the specified record using the index number as seen in
the -T state table.
AUTHORbtool is part of the Barry project. This manual page was written by
Ian Darwin and Chris Frey.
SEE ALSO
http://www.netdirect.ca/software/packages/barry
Especially the caveats, and the call for developers and others to help
with the project.
May 6, 2008 BTOOL(1)
