audioixp(7D) Devices audioixp(7D)NAMEaudioixp - ATI IXP400 south bridge audio digital controller interface
DESCRIPTION
The audioixp device uses the IXP400 south bridge audio digital con‐
troller and a AC-97 Codec to implement the audio device interface.
The audioixp device provides support for the internal speaker,
headphone, line out, line in, and microphone.
FILES
/kernel/drv/audioixp.conf Driver configuration file
/kernel/drv/audioixp 32-bit kernel driver module
/kernel/drv/amd64/audioixp 64-bit kernel driver module
ATTRIBUTES
See attributes(5) for a descriptions of the following attributes:
┌────────────────────┬───────────────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├────────────────────┼───────────────────────────────────────┤
│Architecture │ PC-based system │
├────────────────────┼───────────────────────────────────────┤
│Availability │ driver/audio/audioixp │
├────────────────────┼───────────────────────────────────────┤
│Interface Stability │ Uncommitted │
└────────────────────┴───────────────────────────────────────┘
SEE ALSOioctl(2), attributes(5), audio(7I), mixer(7I), streamio(7I)
ATI IXP400 South Bridge Data Sheet
DIAGNOSTICS
In addition to being logged, the following messages may appear on the
system console:
play-interrupts too low The interrupt rate in audioixp.conf is
record-interrupts too low set too low. It has been reset to the
rate specified in the message. Update
audioixp.conf to a higher interrupt rate.
play-interrupts too high The interrupt rate set in audioixp.conf
record-interrupts too high is set too high. It has been reset to the
rate specified in the message. Update
audioixp.conf to a lower interrupt rate.
SunOS 5.11 12 May 2009 audioixp(7D)