Info::Layer3::BayRS(3)User Contributed Perl DocumentatioInfo::Layer3::BayRS(3)NAMESNMP::Info::Layer3::BayRS - SNMP Interface to Nortel routers running
BayRS.
AUTHOR
Eric Miller
SYNOPSIS
# Let SNMP::Info determine the correct subclass for you.
my $bayrs = new SNMP::Info(
AutoSpecify => 1,
Debug => 1,
DestHost => 'myswitch',
Community => 'public',
Version => 2
)
or die "Can't connect to DestHost.\n";
my $class = $bayrs->class();
print "SNMP::Info determined this device to fall under subclass : $class\n";
DESCRIPTION
Abstraction subclass for routers running Nortel BayRS.
For speed or debugging purposes you can call the subclass directly, but
not after determining a more specific class using the method above.
my $bayrs = new SNMP::Info::Layer3::BayRS(...);
Inherited Classes
SNMP::Info
SNMP::Info::Bridge
SNMP::Info::Layer3
Required MIBs
Wellfleet-HARDWARE-MIB
Wellfleet-MODULE-MIB
Wellfleet-OSPF-MIB
Wellfleet-DOT1QTAG-CONFIG-MIB
Wellfleet-CSMACD-MIB
Inherited MIBs
See "Required MIBs" in SNMP::Info for its own MIB requirements.
See "Required MIBs" in SNMP::Info::Bridge for its own MIB requirements.
See "Required MIBs" in SNMP::Info::Layer3 for its own MIB requirements.
GLOBALS
These are methods that return scalar value from SNMP
$bayrs->model()
Returns the model of the BayRS router. Will translate between the
MIB model and the common model with this map :
C<%MODEL_MAP = (
'acefn' => 'FN',
'aceln' => 'LN',
'acecn' => 'CN',
'afn' => 'AFN',
'in' => 'IN',
'an' => 'AN',
'arn' => 'ARN',
'sys5000' => '5000',
'freln' => 'BLN',
'frecn' => 'BCN',
'frerbln' => 'BLN-2',
'asn' => 'ASN',
'asnzcable' => 'ASN-Z',
'asnbcable' => 'ASN-B',
);>
$bayrs->vendor()
Returns 'nortel'
$bayrs->os()
Returns 'bayrs'
$bayrs->os_ver()
Returns the software version extracted from "sysDescr"
$bayrs->serial()
Returns ("wfHwBpSerialNumber") after conversion to ASCII decimal
$bayrs->root_ip()
Returns the primary IP used to communicate with the router.
Returns the first found: CLIP (CircuitLess IP),
("wfOspfRouterId"), or undefined.
Globals imported from SNMP::Info
See documentation in "GLOBALS" in SNMP::Info for details.
Globals imported from SNMP::Info::Bridge
See documentation in "GLOBALS" in SNMP::Info::Bridge for details.
Globals imported from SNMP::Info::Layer3
See documentation in "GLOBALS" in SNMP::Info::Layer3 for details.
TABLE METHODS
These are methods that return tables of information in the form of a
reference to a hash.
Note: These methods do not support partial table fetches, a partial
can be passed but the entire table will be returned.
Overrides
$bayrs->interfaces()
Returns reference to the map between IID and physical Port.
The physical port name is stripped to letter and numbers to signify
port type and slot port (S11) if the default platform naming was
maintained. Otherwise the port is the interface description.
$bayrs->i_name()
Returns ("ifDescr") along with VLAN name ("wfDot1qTagCfgVlanName")
for VLAN interfaces.
$bayrs->i_duplex()
Returns reference to hash. Maps port operational duplexes to IIDs
for Ethernet interfaces.
$bayrs->i_duplex_admin()
Returns reference to hash. Maps port admin duplexes to IIDs for
Ethernet interfaces.
$bayrs->i_vlan()
Returns reference to hash. Maps port VLAN ID to IIDs.
Pseudo ENTITY-MIB information
These methods emulate ENTITY-MIB Physical Table methods using
Wellfleet-HARDWARE-MIB and Wellfleet-MODULE-MIB.
$bayrs->e_index()
Returns reference to hash. Key and Value: Integer. The index is
created by combining the slot, module, and position into a five or
six digit integer. Slot can be either one or two digits while the
module and position are each two digits padded with leading zero if
required.
$bayrs->e_class()
Returns reference to hash. Key: IID, Value: General hardware type.
This class only returns container and module types.
$bayrs->e_descr()
Returns reference to hash. Key: IID, Value: Human friendly name.
$bayrs->e_name()
Returns reference to hash. Key: IID, Value: Human friendly name.
$bayrs->e_hwver()
Returns reference to hash. Key: IID, Value: Hardware version.
$bayrs->e_vendor()
Returns reference to hash. Key: IID, Value: nortel.
$bayrs->e_serial()
Returns reference to hash. Key: IID, Value: Serial number.
$bayrs->e_pos()
Returns reference to hash. Key: IID, Value: The relative position
among all entities sharing the same parent.
$bayrs->e_type()
Returns reference to hash. Key: IID, Value: Type of
component/sub-component as defined in Wellfleet-HARDWARE-MIB for
processors and link modules or Wellfleet-MODULE-MIB for hardware
modules.
$bayrs->e_fwver()
Returns reference to hash. Key: IID, Value: Firmware revision.
Only available on processors.
$bayrs->e_swver()
Returns reference to hash. Key: IID, Value: Software revision.
Only available on processors.
$bayrs->e_parent()
Returns reference to hash. Key: IID, Value: The value of e_index()
for the entity which 'contains' this entity. A value of zero
indicates this entity is not contained in any other entity.
Table Methods imported from SNMP::Info
See documentation in "TABLE METHODS" in SNMP::Info for details.
Table Methods imported from SNMP::Info::Bridge
See documentation in "TABLE METHODS" in SNMP::Info::Bridge for details.
Table Methods imported from SNMP::Info::Layer3
See documentation in "TABLE METHODS" in SNMP::Info::Layer3 for details.
Data Munging Callback Subroutines
$extreme->munge_hw_rev()
Converts octets to a decimal major.minor string.
$extreme->munge_wf_serial()
Coverts octets to a decimal string.
perl v5.14.1 2011-09-28 Info::Layer3::BayRS(3)
