Info::FDP(3) User Contributed Perl Documentation Info::FDP(3)NAMESNMP::Info::FDP - SNMP Interface to Foundry Discovery Protocol (FDP)
using SNMP
AUTHOR
Bruce Rodger, Max Baker
SYNOPSIS
my $fdp = new SNMP::Info (
AutoSpecify => 1,
Debug => 1,
DestHost => 'router',
Community => 'public',
Version => 2
);
my $class = $fdp->class();
print " Using device sub class : $class\n";
$hasfdp = $fdp->hasFDP() ? 'yes' : 'no';
# Print out a map of device ports with FDP neighbors:
my $interfaces = $fdp->interfaces();
my $fdp_if = $fdp->fdp_if();
my $fdp_ip = $fdp->fdp_ip();
my $fdp_port = $fdp->fdp_port();
foreach my $fdp_key (keys %$fdp_ip){
my $iid = $fdp_if->{$fdp_key};
my $port = $interfaces->{$iid};
my $neighbor = $fdp_ip->{$fdp_key};
my $neighbor_port = $fdp_port->{$fdp_key};
print "Port : $port connected to $neighbor / $neighbor_port\n";
}
DESCRIPTIONSNMP::Info::FDP is a subclass of SNMP::Info that provides an object
oriented interface to FDP information through SNMP.
FDP is a Layer 2 protocol that supplies topology information of devices
that also speak FDP, mostly switches and routers. It has similar
functionality to Cisco's CDP, and the SNMP interface is virtually
identical. FDP is implemented in Foundry devices, including the
Bigiron and Fastiron range.
Create or use a device subclass that inherits this class. Do not use
directly.
Each device implements a subset of the global and cache entries. Check
the return value to see if that data is held by the device.
Inherited Classes
None.
Required MIBs
FOUNDRY-SN-SWITCH-GROUP-MIB
Needs a reasonably recent MIB. Works OK with B2R07604A.mib, but
doesn't work with B2R07600C.
GLOBAL METHODS
These are methods that return scalar values from SNMP
$fdp->hasFDP()
Is FDP is active in this device?
Accounts for SNMP version 1 devices which may have FDP but not
fdp_run()
$fdp->fdp_run()
Is FDP enabled on this device?
("fdpGlobalRun")
$fdp->fdp_interval()
Interval in seconds at which FDP messages are generated.
("fdpGlobalMessageInterval")
$fdp->fdp_holdtime()
Time in seconds that FDP messages are kept.
("fdpGlobalHoldTime")
$fdp->fdp_id()
Returns FDP device ID.
This is the device id broadcast via FDP to other devices, and is
what is retrieved from remote devices with $fdp->id().
("fdpGlobalDeviceId")
Overrides
CDP compatibility
$fdp->c_interval()
Interval in seconds at which FDP messages are generated.
("fdpGlobalMessageInterval")
$fdp->c_holdtime()
Time in seconds that FDP messages are kept.
("fdpGlobalHoldTime")
$fdp->c_id()
Returns FDP device ID.
This is the device id broadcast via FDP to other devices, and is
what is retrieved from remote devices with $fdp->id().
("fdpGlobalDeviceId")
$cdp->cdp_run()
Is FDP enabled on this device?
TABLE METHODS
These are methods that return tables of information in the form of a
reference to a hash.
Overrides
CDP compatibility
$fdp->c_capabilities()
Returns Device Functional Capabilities. Results are munged into an
ascii binary string, 7 digits long, MSB. Each digit represents a
bit from the table below.
From
<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#18843>:
(Bit) - Description
(0x40) - Provides level 1 functionality.
(0x20) - The bridge or switch does not forward IGMP Report packets
on non router ports.
(0x10) - Sends and receives packets for at least one network layer
protocol. If the device is routing the protocol, this bit should
not be set.
(0x08) - Performs level 2 switching. The difference between this
bit and bit 0x02 is that a switch does not run the Spanning-Tree
Protocol. This device is assumed to be deployed in a physical loop-
free topology.
(0x04) - Performs level 2 source-route bridging. A source-route
bridge would set both this bit and bit 0x02.
(0x02) - Performs level 2 transparent bridging.
(0x01) - Performs level 3 routing for at least one network layer
protocol.
Thanks to Martin Lorensen "martin -at- lorensen.dk" for a pointer
to this information.
("fdpCacheCapabilities")
$fdp->c_domain()
The CDP version of this returns remote VTP Management Domain as
defined in "CISCO-VTP-MIB::managementDomainName"
("fdpCacheVTPMgmtDomain")
$fdp->c_duplex()
Returns the port duplex status from remote devices.
("fdpCacheDuplex")
$fdp->c_id()
Returns remote device id string
("fdpCacheDeviceId")
$fdp->c_if()
Returns the mapping to the SNMP Interface Table.
Note that a lot devices don't implement $fdp->fdp_index(), So if
it isn't around, we fake it.
In order to map the fdp table entry back to the interfaces() entry,
we truncate the last number off of it :
# it exists, yay.
my $fdp_index = $device->fdp_index();
return $fdp_index if defined $fdp_index;
# if not, let's fake it
my $fdp_ip = $device->fdp_ip();
my %fdp_if
foreach my $key (keys %$fdp_ip){
$iid = $key;
## Truncate off .1 from fdp response
$iid =~ s/\.\d+$//;
$fdp_if{$key} = $iid;
}
return \%fdp_if;
$fdp->c_index()
Returns the mapping to the SNMP2 Interface table for FDP Cache
Entries.
Most devices don't implement this, so you probably want to use
$fdp->fdp_if() instead.
See fdp_if() entry.
("fdpCacheIfIndex")
$fdp->c_ip()
Returns remote IP address
("fdpCacheAddress")
$fdp->c_platform()
Returns remote platform id
("fdpCachePlatform")
$fdp->c_port()
Returns remote port ID
("fdpDevicePort")
$fdp->c_proto()
Returns remote address type received. Usually IP.
("fdpCacheAddressType")
$fdp->c_ver()
Returns remote hardware version
("fdpCacheVersion")
$fdp->c_vlan()
Returns the remote interface native VLAN.
("fdpCacheNativeVLAN")
perl v5.14.1 2011-09-28 Info::FDP(3)