MooseX::Daemonize::CorUser Contributed Perl DocumentMooseX::Daemonize::Core(3)NAMEMooseX::Daemonize::Core - A Role with the core daemonization features
SYNOPSIS
package My::Daemon;
use Moose;
with 'MooseX::Daemonize::Core';
sub start {
my $self = shift;
# daemonize me ...
$self->daemonize;
# return from the parent,...
return unless $self->is_daemon;
# but continue on in the child (daemon)
}
DESCRIPTION
This is the basic daemonization Role, it provides a few methods (see
below) and the minimum features needed to properly daemonize your code.
Important Notes
None of the methods in this role will exit the parent process for you,
it only forks and detaches your child (daemon) process. It is your
responsibility to exit the parent process in some way.
There is no PID or PID file management in this role, that is your
responsibility (see some of the other roles in this distro for that).
ATTRIBUTES
is_daemon (is = rw, isa => Bool)>
This attribute is used to signal if we are within the daemon
process or not.
no_double_fork (is = rw, isa => Bool)>
Setting this attribute to true will cause this method to not
perform the typical double-fork, which is extra added protection
from your process accidentally aquiring a controlling terminal.
More information can be found above, and by Googling "double fork
daemonize".
If you the double-fork behavior off, you might want to enable the
ignore_zombies.
ignore_zombies (is = rw, isa => Bool)>
Setting this attribute to a true value will result in setting the
$SIG{CHLD} handler to "IGNORE". This tells perl to clean up zombie
processes. By default, and for the most part you don't need it,
only when you turn off the double fork behavior (with the
no_double_fork attribute) do you sometimes want this behavior.
dont_close_all_files (is = rw, isa => Bool)>
Setting this attribute to true will cause it to skip closing all
the filehandles. This is useful if you are opening things like
sockets and such in the pre-fork.
METHODS
daemon_fork (?%options)
This forks off the child process to be daemonized. Just as with the
built in fork, it returns the child pid to the parent process, 0 to
the child process. It will also set the is_daemon flag
appropriately.
The %options argument remains for backwards compatability, but it
is suggested that you use the attributes listed above instead.
daemon_detach (?%options)
This detaches the new child process from the terminal by doing the
following things.
The %options argument remains for backwards compatability, but it
is suggested that you use the attributes listed above instead.
Becomes a session leader
This detaches the program from the controlling terminal, it is
accomplished by calling POSIX::setsid.
Performing the double-fork
See below for information on how to change this part of the
process.
Changes the current working directory to "/"
This is standard daemon behavior, if you want a different
working directory then simply change it later in your daemons
code.
Clears the file creation mask.
Closes all open file descriptors.
See the dont_close_all_files attribute for information on how
to change this part of the process.
Reopen STDERR, STDOUT & STDIN to /dev/null
This behavior can be controlled slightly though the
MX_DAEMON_STDERR and MX_DAEMON_STDOUT environment variables. It
will look for a filename in either of these variables and
redirect STDOUT and/or STDERR to those files. This is useful
for debugging and/or testing purposes.
NOTE
If called from within the parent process (the is_daemon flag is
set to false), this method will simply return and do nothing.
daemonize (?%options)
This will simply call "daemon_fork" followed by
"daemon_detach".
The %options argument remains for backwards compatability, but
it is suggested that you use the attributes listed above
instead.
meta()
The "meta()" method from Class::MOP::Class
STUFF YOU SHOULD READ
Note about double fork
Taken from
<http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/66012> in
a comment entitled The second fork _is_ necessary by Jonathan
Bartlett, it is not the definitive statement on the issue, but it's
clear and well written enough so I decided to reproduce it here.
The first fork accomplishes two things - allow the shell to return,
and allow you to do a setsid().
The setsid() removes yourself from your controlling terminal. You
see, before, you were still listed as a job of your previous process,
and therefore the user might accidentally send you a signal. setsid()
gives you a new session, and removes the existing controlling terminal.
The problem is, you are now a session leader. As a session leader, if
you open a file descriptor that is a terminal, it will become your
controlling terminal (oops!). Therefore, the second fork makes you NOT
be a session leader. Only session leaders can acquire a controlling
terminal, so you can open up any file you wish without worrying that
it will make you a controlling terminal.
So - first fork - allow shell to return, and permit you to call setsid()
Second fork - prevent you from accidentally reacquiring a controlling
terminal.
That said, you don't always want this to be the behavior, so you
are free to specify otherwise using the no_double_fork attribute.
Note about zombies
Doing the double fork (see above) tends to get rid of your zombies
since by the time you have double forked your daemon process is
then owned by the init process. However, sometimes the double-fork
is more than you really need, and you want to keep your daemon
processes a little closer to you. In this case you have to watch
out for zombies, you can avoid then by just setting the
ignore_zombies attribute (see above).
ENVIRONMENT VARIABLES
These variables are best just used for debugging and/or testing, but
not used for actual logging. For that, you should reopen STDOUT/ERR on
your own.
MX_DAEMON_STDOUT
A filename to redirect the daemon STDOUT to.
MX_DAEMON_STDERR
A filename to redirect the daemon STDERR to.
DEPENDENCIES
Moose::Role, POSIX
INCOMPATIBILITIES
None reported.
BUGS AND LIMITATIONS
No bugs have been reported.
Please report any bugs or feature requests to
"bug-acme-dahut-call@rt.cpan.org", or through the web interface at
<http://rt.cpan.org>.
SEE ALSO
Proc::Daemon
This code is based HEAVILY on Proc::Daemon, we originally depended on
it, but we needed some more flexibility, so instead we just stole the
code.
AUTHOR
Stevan Little "<stevan.little@iinteractive.com>"
LICENCE AND COPYRIGHT
Copyright (c) 2007-2011, Chris Prather "<perigrin@cpan.org>". All
rights reserved.
Portions heavily borrowed from Proc::Daemon which is copyright Earl
Hood.
This module is free software; you can redistribute it and/or modify it
under the same terms as Perl itself. See perlartistic.
DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH
YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
POD ERRORS
Hey! The above document had some coding errors, which are explained
below:
Around line 285:
You forgot a '=back' before '=head1'
perl v5.14.2 2012-05-31 MooseX::Daemonize::Core(3)