elcsd.conf(5)elcsd.conf(5)Nameelcsd.conf - error logging configuration file
Description
The file contains information used by the daemon to configure error
logging for the system. The system manager maintains this file. The
error logging daemon is dependent on the current order of the entries
in the file. Do not change the order.
The information in the file shows any defaults and describes what you
can enter. A newline is used to delimit each entry in the file, a null
entry consists of a newline alone, and comments begin with #.
#
# elcsd - errlog configuration file
#
{ # delimiter DON'T remove or comment out!
1 # status 1-local,2-logrem,4-remlog,5-remlog+priloglocal
# errlog file size limit num. of blocks
/usr/adm/syserr # errlog dir. path
# backup errlog dir. path
/ # single user errlog dir. path
/usr/adm/syserr # log remote hosts errlog dir. path
# remote hostname to log to
} # delimiter DON'T remove or comment out!
# hosts to log :S - separate file or :R - remotes file (together)
remote1:S
remote2:S
#remote3:S # disabled
remote4:S
.
.
.
The status line of the file describes where you can log error packets,
also called error messages:
Logs error packets locally =
1, the default.
Logs error packets from a remote system or systems to the local
machine =
2.
Logs local and remote error packets locally =
3.
Logs error packets from the local system to a remote system =
4.
Logs error packets from the local system remotely and logs high
priority messages locally = 5.
The errorlog file size defines the maximum size of an errorlog file.
If disk space is limited, you can specify the maximum number of blocks
(512 bytes each) you want the errorlog file to be. If you do not spec‐
ify the maximum number of blocks, the system will notify you when the
file system is 98% full.
The default errorlog directory path is You can direct error packets to
a different directory; if you do, you must change the default for also.
For further information, see
If the error-logging daemon cannot write to the primary errorlog direc‐
tory path, it attempts to log to the backup errorlog directory path
automatically.
The root directory is the default for the single-user errorlog direc‐
tory path. When the system makes the transition to multiuser mode,
errors logged in single-user mode are transferred to the default error‐
log directory path You can direct single-user error packets to another
directory.
To log error packets from a remote system locally, set up an errorlog
directory path on the local system. The default is
Errorlog packets from remote systems can be logged to separate files or
to one file. S sets up a separate errorlog file for each remote system
that logs locally. R logs packets from the corresponding remote system
to the file syserr.remotes. The default is S.
Restrictions
You must have superuser privileges to change the file. However, anyone
can view the file.
Files
elcsd daemon messages
See Alsoelcsd(8), eli(8), uerf(8)
Guide to the Error Logger System
elcsd.conf(5)