smp_rep_phy_err_log man page on Scientific
[printable version]
SMP_REP_PHY_ERR_LOG(8) SMP_UTILS SMP_REP_PHY_ERR_LOG(8)
NAME
smp_rep_phy_err_log - invoke REPORT PHY ERROR LOG SMP function
SYNOPSIS
smp_rep_phy_err_log [--help] [--hex] [--interface=PARAMS] [--phy=ID]
[--raw] [--sa=SAS_ADDR] [--verbose] [--version] SMP_DEVICE[,N]
DESCRIPTION
Sends a SAS Management Protocol (SMP) REPORT PHY ERROR LOG request
function to a SMP target. The SMP target is identified by the
SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR
may be deduced from the SMP_DEVICE. With one interface there is one
SMP_DEVICE per machine so the SMP_DEVICE,N syntax is needed to differ‐
entiate between HBAs if there are multiple present.
OPTIONS
Mandatory arguments to long options are mandatory for short options as
well.
-h, --help
output the usage message then exit.
-H, --hex
output the response in hexadecimal.
-I, --interface=PARAMS
interface specific parameters. In this case "interface" refers
to the path through the operating system to the SMP initiator.
See the smp_utils man page for more information.
-p, --phy=ID
phy identifier. ID is a value between 0 and 127. Default is 0.
-r, --raw
send the response to stdout in binary. All error messages are
sent to stderr.
-s, --sa=SAS_ADDR
specifies the SAS address of the SMP target device. Typically
this is an expander. This option may not be needed if the
SMP_DEVICE has the target's SAS address within it. The SAS_ADDR
is in decimal but most SAS addresses are shown in hexadecimal.
To give a number in hexadecimal either prefix it with '0x' or
put a trailing 'h' on it.
-v, --verbose
increase the verbosity of the output. Can be used multiple times
-V, --version
print the version string and then exit.
NOTES
Similar information is maintained for SAS SSP target phys (e.g. on a
SAS disk). It can be obtained from the Protocol Specific Port log page
with the sg_logs utility.
Similar information may be obtained for SAS initiator phys (e.g. on a
SAS HBA). As an example in Linux 2.6.28 error information can be found
in this directory /sys/class/sas_phy/phy-4:0 (for the phy 0 in SCSI/SAS
host 4).
Similar information may be obtained for SATA device phys (e.g. on a
SATA disk). If there is a SAT layer between OS and the SATA device then
the sg_sat_phy_event utility can fetch the information.
CONFORMING TO
The SMP REPORT PHY ERROR LOG function was introduced in SAS-1 . The
"Expander change count" field was added in SAS-2 .
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright © 2006-2008 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO war‐
ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR‐
POSE.
SEE ALSO
smp_utils, smp_phy_control(smp_utils), sg_logs(sg3_utils),
sg_sat_phy_event(sg3_utils)
smp_utils-0.94 December 2008 SMP_REP_PHY_ERR_LOG(8)
[top]
List of man pages available for Scientific
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
Vote for polarhome
|