CLUSTER.CONF(5) cluster CLUSTER.CONF(5)NAMEcluster.conf - configuration file for cman and related daemons
SYNOPSIS
/etc/cluster/cluster.conf
DESCRIPTION
When cman_tool(8) starts the corosync(8) daemon, the cluster.conf data
is read into the corosync in-memory database (confdb). The configura‐
tion is used by corosync, cman and other related cluster daemons and
programs. When cman configures corosync with cluster.conf, the
corosync.conf(5) file is not used.
A basic cluster configuration is described below. Configuration
options for other daemons/programs are described in their own man
pages. ccs_tool(8) can be used to do some basic cluster.conf editing.
The cluster.rng schema is used to validate cluster.conf. Unrecognized
items will produce a warning during cluster startup, and invalid xml
structure will cause the cluster startup to fail. See ccs_config_vali‐
date(8) and ccs_config_dump(8).
Cluster
The top level cluster section contains all other sections and has two
required attributes:
name The name of the cluster can be up to 15 characters long (16
including terminating null). It is important that this name be
unique among clusters on the same network.
config_version
The config_version specifies the revision level of the file and
should be increased each time the file is updated.
<cluster name="alpha" config_version="1">
</cluster>
Cluster Nodes
The set of nodes that make up the cluster are defined in the clustern‐
odes section which contains multiple clusternode sections. A clustern‐
ode has two required attributes:
name The node name should correspond to the hostname on the network
interface to be used for cluster communication.
nodeid The node id must be greater than zero and unique.
<cluster name="alpha" config_version="1">
<clusternodes>
<clusternode name="node-01" nodeid="1">
</clusternode>
<clusternode name="node-02" nodeid="2">
</clusternode>
<clusternode name="node-03" nodeid="3">
</clusternode>
</clusternodes>
</cluster>
Logging
Cluster daemons use a common logging section to configure their
loggging behavior.
<cluster name="alpha" config_version="1">
<logging/>
</cluster>
Global settings apply to all:
<logging debug="on"/>
Per-daemon logging_daemon subsections override the global settings.
Daemon names that can be configured include: corosync, qdiskd, groupd,
fenced, dlm_controld, gfs_controld, rgmanager.
<logging>
<logging_daemon name="qdiskd" debug="on"/>
<logging_daemon name="fenced" debug="on"/>
</logging>
Corosync daemon settings apply to all corosync subsystems by default,
but subsystems can also be configured individually. These include CLM,
CPG, MAIN, SERV, CMAN, TOTEM, QUORUM, CONFDB, CKPT, EVT.
<logging>
<logging_daemon name="corosync" subsys="QUORUM" debug="on"/>
<logging_daemon name="corosync" subsys="CONFDB" debug="on"/>
</logging>
The attributes available at global, daemon and subsystem levels are:
to_syslog
enable/disable messages to syslog (yes/no), default "yes"
to_logfile
enable/disable messages to log file (yes/no), default "yes"
syslog_facility
facility used for syslog messages, default "local4"
syslog_priority
messages at this level and up will be sent to syslog, default
"info"
logfile_priority
messages at this level and up will be written to log file,
default "info"
logfile
the log file name, default /var/log/cluster/<daemon>.log
debug="on"
a shortcut for logfile_priority="debug"
EXAMPLE
An explicit configuration for the default settings would be:
<logging to_syslog="yes" to_logfile="yes" syslog_facility="local4"
syslog_priority="info" logfile_priority="info">
<logging_daemon name="qdiskd"
logfile="/var/log/cluster/qdiskd.log"/>
<logging_daemon name="fenced"
logfile="/var/log/cluster/fenced.log"/>
<logging_daemon name="dlm_controld"
logfile="/var/log/cluster/dlm_controld.log"/>
<logging_daemon name="gfs_controld"
logfile="/var/log/cluster/gfs_controld.log"/>
<logging_daemon name="rgmanager"
logfile="/var/log/cluster/rgmanager.log"/>
<logging_daemon name="corosync"
logfile="/var/log/cluster/corosync.log"/>
</logging>
To include debug messages (and above) from all daemons in their default
log files, either of the following which are equivalent:
<logging debug="on"/>
<logging logfile_priority="debug"/>
To exclude all log messages from syslog:
<logging to_syslog="no"/>
To disable logging to all log files:
<logging to_file="no"/>
To include debug messages (and above) from all daemons in syslog:
<logging syslog_priority="debug"/>
To limit syslog messages to error (and above), keeping info (and above)
in log files (this logfile_priority setting is the default so could be
omitted):
<logging syslog_priority="error" logfile_priority="info"/>
FILES
/etc/cluster/cluster.conf
standard location of cluster configuration file
/usr/share/cluster/cluster.rng
standard location of cluster.conf schema
SEE ALSOccs_tool(8), ccs_config_dump(8), ccs_config_validate(8), cman_tool(8),
cman(5), qdisk(5), fenced(8), fence_node(8), dlm_controld(8), gfs_con‐
trold(8), rgmanager(8)cluster 2010-01-12 CLUSTER.CONF(5)