VOS_RESTORE(1) AFS Command Reference VOS_RESTORE(1)NAME
vos_restore - Converts an ASCII dump file into an AFS volume
SYNOPSIS
vos restore -server <machine name>
-partition <partition name>
-name <name of volume to be restored>
[-file <dump file>]
[-id <volume ID>]
[-overwrite (abort | full | incremental)]
[-offline] [-readonly]
[-creation (dump | keep | new)]
[-lastupdate (dump | keep | new)]
[-nodelete] [-cell <cell name>]
[-noauth] [-localauth]
[-verbose] [-encrypt] [-noresolve] [-help]
vos res -s <machine name>
-p <partition name>
-na <name of volume to be restored>
[-f <dump file>]
[-i <volume ID>]
[-ov (a | f | i)]
[-of] [-r]
[-cr (d | k | n)]
[-la (d | k | n)]
[-nod] [-c <cell name>]
[-noa] [-lo] [-v] [-e] [-nor] [-h]
DESCRIPTION
The vos restore command converts a volume dump file previously created
with the vos dump command from ASCII into the volume format appropriate
for the machine type indicated by the -server argument, and restores it
as a read/write volume to the partition named by the -partition
argument on that machine. The Volume Server assigns the volume name
indicated with the -name argument, and resets the volume's creation
timestamp to the time at which the restore operation begins (the
creation timestamp is stored in the volume header and reported in the
"Creation" field in the output from the vos examine and vos listvol
commands.)
Use the -file argument to name the dump file, or omit the argument to
provide the file via the standard input stream, presumably through a
pipe. The pipe can be named, which enables interoperation with third-
party backup utilities.
As described in the following list, the command can create a completely
new volume or overwrite an existing volume. In all cases, the full dump
of the volume must be restored before any incremental dumps. If there
are multiple incremental dump files, they must be restored in the order
they were created.
· To create a new read/write volume, use the -name argument to
specify a volume name that does not already exist in the Volume
Location Database (VLDB), and the -server and -partition arguments
to specify the new volume's site. It is best to omit the -id
argument so that the Volume Location (VL) Server allocates a volume
ID automatically. Do not include the -overwrite argument, because
there is no existing volume to overwrite.
· To overwrite an existing volume at its current site, specify its
name and site with the -name, -server, and -partition arguments.
The volume retains its current volume ID number unless the -id
argument is provided. Specify the value "f" or "i" for the
-overwrite argument to indicate whether the dump file is full or
incremental, respectively.
· To overwrite an existing volume and move it to a new site, specify
its name and the new site with the -name, -server, and -partition
arguments. The volume retains its current volume ID number unless
the -id argument is provided. The volume is removed from its
original site. Specify the value "f" for the -overwrite argument to
indicate that the dump file is a full dump (it is not possible to
restore an incremental dump and move the volume at the same time).
If the volume named by the -name argument already exists and the
-overwrite argument is omitted, the command interpreter produces the
following prompt:
Do you want to do a full/incremental restore or abort? [fia](a):
Respond by entering one of the following values:
· "f" if restoring a full dump file
· "i" if restoring an incremental dump file
· "a" or Return to cancel the restore operation
CAUTIONS
If the -file argument is omitted, the issuer must provide all other
necessary arguments, because the standard input stream is unavailable
for responding to the command interpreter's prompts for missing
information. In particular, the issuer must provide the -overwrite
argument if overwriting an existing volume.
OPTIONS-server <server name>
Identifies the file server machine onto which to restore the
volume. Provide the machine's IP address or its host name (either
fully qualified or using an unambiguous abbreviation). For details,
see vos(1).
-partition <partition name>
Identifies the partition (on the file server machine specified by
the -server argument) onto which to restore the volume. Provide the
partition's complete name with preceding slash (for example,
/vicepa) or use one of the three acceptable abbreviated forms. For
details, see vos(1).
-name <name of volume>
Specifies the name under which to restore the volume. It can be up
to 22 characters long, but cannot end with a ".readonly" or
".backup" extension. If the volume already exists, it is
overwritten subject to the value of the -overwrite argument.
-file <dump file>
Names the dump file to restore. Incomplete pathnames are
interpreted relative to the current working directory. Omit this
argument to provide the dump file via the standard input stream.
-id <volume ID>
Specifies the volume ID number to assign to the restored volume.
-overwrite (a | f | i)
Specifies which type of dump file is being restored when
overwriting an existing volume. Provide one of the following
values:
· "a" to terminate the restore operation.
· "f" if restoring a full dump file.
· "i" if restoring an incremental dump file. This value is not
acceptable if the -server and -partition arguments do not
indicate the volume's current site.
This argument is mandatory if the -file argument is not provided.
-offline
Leaves the new volume flagged as off-line in the volume database.
-readonly
Flags the new volume as read-only in the volume database.
-creation <dump | keep | new>
Set the creation date of the new volume to the timestamp from the
dumped volume (dump), from the target volume, if there is one
(keep), or generate a new one using the current time (new).
-lastupdate <dump | keep | new>
Set the last updated date of the new volume to the timestamp from
the dumped volume (dump), from the target volume, if there is one
(keep), or generate a new one using the current time (new).
-nodelete
This option is available in OpenAFS clients 1.4.7 or later and
1.5.31 or later. This option can be used with OpenAFS server
versions 1.4.1 or later and 1.5.0 or later.
-cell <cell name>
Names the cell in which to run the command. Do not combine this
argument with the -localauth flag. For more details, see vos(1).
-noauth
Assigns the unprivileged identity "anonymous" to the issuer. Do not
combine this flag with the -localauth flag. For more details, see
vos(1).
-localauth
Constructs a server ticket using a key from the local
/usr/afs/etc/KeyFile file. The vos command interpreter presents it
to the Volume Server and Volume Location Server during mutual
authentication. Do not combine this flag with the -cell argument or
-noauth flag. For more details, see vos(1).
-verbose
Produces on the standard output stream a detailed trace of the
command's execution. If this argument is omitted, only warnings and
error messages appear.
-encrypt
Encrypts the command so that the operation's results are not
transmitted across the network in clear text. This option is
available in OpenAFS versions 1.4.11 or later and 1.5.60 or later.
-noresolve
Shows all servers as IP addresses instead of the DNS name. This is
very useful when the server address is registered as 127.0.0.1 or
when dealing with multi-homed servers. This option is available in
OpenAFS versions 1.4.8 or later and 1.5.35 or later.
-help
Prints the online help for this command. All other valid options
are ignored.
EXAMPLES
The following command restores the contents of the dump file
/afs/abc.com/common/dumps/terry.dump to the /vicepc partition on the
file server machine "fs3.abc.com". The restored volume is named
"user.terry".
% cd /afs/abc.com/common/dumps
% vos restore -file terry.dump -server fs3.abc.com -partition c \
-name user.terry
PRIVILEGE REQUIRED
The issuer must be listed in the /usr/afs/etc/UserList file on the
machine specified with the -server argument and on each database server
machine. If the -localauth flag is included, the issuer must instead be
logged on to a server machine as the local superuser "root".
SEE ALSOrestorevol(1), vos(1), vos_dump(1), vos_examine(1), vos_listvol(1)COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0.
It was converted from HTML to POD by software written by Chas Williams
and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
OpenAFS 2013-10-09 VOS_RESTORE(1)