TRACE-CMD-REPORT(1) [FIXME: manual] TRACE-CMD-REPORT(1)NAME
trace-cmd-report - show in ASCII a trace created by trace-cmd record
SYNOPSIS
trace-cmd report [OPTIONS] [input-file]
DESCRIPTION
The trace-cmd(1) report command will output a human readable report of
a trace created by trace-cmd record.
OPTIONS-i input-file
By default, trace-cmd report will read the file trace.dat. But the
-i option open up the given input-file instead. Note, the input
file may also be specified as the last item on the command line.
-e
This outputs the endianess of the file. trace-cmd report is smart
enough to be able to read big endian files on little endian
machines, and vise versa.
-f
This outputs the list of functions that have been recorded in the
file.
-P
This outputs the list of "trace_printk()" data. The raw trace data
points to static pointers in the kernel. This must be stored in the
trace.dat file.
-E
This lists the possible events in the file (but this list is not
necessarily the list of events in the file).
--events
This will list the event formats that are stored in the trace.dat
file.
-F filter
Add a filter to limit what events are displayed. The format of the
filter is:
<events> ´:´ <filter>
<events> = SYSTEM´/´EVENT | SYSTEM | EVENT | <events> ´,´ <events>
<filter> = EVENT_FIELD <op> <value> | <filter> ´&&´ <filter> |
<filter> ´||´ <filter> | ´(´ <filter> ´)´ | ´!´ <filter>
<op> = ´==´ | ´!=´ | ´>=´ | ´<=´ | ´>´ | ´<´ | ´&´ | ´|´ | ´^´ |
´+´ | ´-´ | ´*´ | ´/´ | ´%´
<value> = NUM | STRING | EVENT_FIELD
SYSTEM is the name of the system to filter on. If the EVENT is left out,
then it applies to all events under the SYSTEM. If only one string is used
without the ´/´ to deliminate between SYSTEM and EVENT, then the filter
will be applied to all systems and events that match the given string.
Whitespace is ignored, such that "sched:next_pid==123" is equivalent to
"sched : next_pid == 123".
STRING is defined with single or double quotes (single quote must end with
single quote, and double with double). Whitespace within quotes are not
ignored.
The representation of a SYSTEM or EVENT may also be a regular expression
as defined by ´regcomp(3)´.
The EVENT_FIELD is the name of the field of an event that is being
filtered. If the event does not contain the EVENT_FIELD, that part of the
equation will be considered false.
-F ´sched : bogus == 1 || common_pid == 2´
The "bogus == 1" will always evaluate to FALSE because no event has a
field called "bogus", but the "common_pid == 2" will still be evaluated
since all events have the field "common_pid". Any "sched" event that was
traced by the process with the PID of 2 will be shown.
Note, the EVENT_FIELD is the field name as shown by an events format
(as displayed with *--events*), and not what is found in the output.
If the output shows "ID:foo" but the field that "foo" belongs to was
called "name" in the event format, then "name" must be used in the filter.
The same is true about values. If the value that is displayed is converted
by to a string symbol, the filter checks the original value and not the
value displayed. For example, to filter on all tasks that were in the
running state at a context switch:
-F ´sched/sched_switch : prev_state==0´
Although the output displays ´R´, having ´prev_stat=="R"´ will not work.
-v
This causes the following filters of -F to filter out the matching
events.
-v -F ´sched/sched_switch : prev_state == 0´
Will not display any sched_switch events that have a prev_state of 0.
Removing the *-v* will only print out those events.
-V
Show the plugins that are loaded.
-L
This will not load system wide plugins. It loads "local only". That
is what it finds in the ~/.trace-cmd/plugins directory.
-N
This will not load any plugins.
-r
This will show the events in "raw" format. That is, it will ignore
the event’s print formatting and just print the contents of each
field.
-l
This adds a "latency output" format. Information about interrupts
being disabled, soft irq being disabled, the "need_resched" flag
being set, preempt count, and big kernel lock are all being
recorded with every event. But the default display does not show
this information. This option will set display this information
with 6 characters. When one of the fields is zero or N/A a ´.\´ is
shown.
<idle>-0 0d.h1. 106467.859747: function: ktime_get <-- tick_check_idle
The 0d.h1. denotes this information. The first character is never a ´.´
and represents what CPU the trace was recorded on (CPU 0). The ´d´ denotes
that interrupts were disabled. The ´h´ means that this was called inside
an interrupt handler. The ´1´ is the preemption disabled (preempt_count)
was set to one. The two ´.´s are "need_resched" flag and kernel lock
counter. If the "need_resched" flag is set, then that character would be a
´N´.
-w
If both the sched_switch and sched_wakeup events are enabled, then
this option will report the latency between the time the task was
first woken, and the time it was scheduled in.
-q
Quiet non critical warnings.
EXAMPLES
Using a trace.dat file that was created with:
# trace-cmd record -p function -e all sleep 5
The default report shows:
# trace-cmd report
trace-cmd-16129 [002] 158126.498411: function: __mutex_unlock_slowpath <-- mutex_unlock
trace-cmd-16131 [000] 158126.498411: kmem_cache_alloc: call_site=811223c5 ptr=0xffff88003ecf2b40 bytes_req=272 bytes_alloc=320 gfp_flags=GFP_KERNEL|GFP_ZERO
trace-cmd-16130 [003] 158126.498411: function: do_splice_to <-- sys_splice
sleep-16133 [001] 158126.498412: function: inotify_inode_queue_event <-- vfs_write
trace-cmd-16129 [002] 158126.498420: lock_release: 0xffff88003f1fa4f8 &sb->s_type->i_mutex_key
trace-cmd-16131 [000] 158126.498421: function: security_file_alloc <-- get_empty_filp
sleep-16133 [001] 158126.498422: function: __fsnotify_parent <-- vfs_write
trace-cmd-16130 [003] 158126.498422: function: rw_verify_area <-- do_splice_to
trace-cmd-16131 [000] 158126.498424: function: cap_file_alloc_security <-- security_file_alloc
trace-cmd-16129 [002] 158126.498425: function: syscall_trace_leave <-- int_check_syscall_exit_work
sleep-16133 [001] 158126.498426: function: inotify_dentry_parent_queue_event <-- vfs_write
trace-cmd-16130 [003] 158126.498426: function: security_file_permission <-- rw_verify_area
trace-cmd-16129 [002] 158126.498428: function: audit_syscall_exit <-- syscall_trace_leave
[...]
To see everything but the function traces:
# trace-cmd report -v -F ´function´
trace-cmd-16131 [000] 158126.498411: kmem_cache_alloc: call_site=811223c5 ptr=0xffff88003ecf2b40 bytes_req=272 bytes_alloc=320 gfp_flags=GFP_KERNEL|GFP_ZERO
trace-cmd-16129 [002] 158126.498420: lock_release: 0xffff88003f1fa4f8 &sb->s_type->i_mutex_key
trace-cmd-16130 [003] 158126.498436: lock_acquire: 0xffffffff8166bf78 read all_cpu_access_lock
trace-cmd-16131 [000] 158126.498438: lock_acquire: 0xffff88003df5b520 read &fs->lock
trace-cmd-16129 [002] 158126.498446: kfree: call_site=810a7abb ptr=0x0
trace-cmd-16130 [003] 158126.498448: lock_acquire: 0xffff880002250a80 &per_cpu(cpu_access_lock, cpu)
trace-cmd-16129 [002] 158126.498450: sys_exit_splice: 0xfffffff5
trace-cmd-16131 [000] 158126.498454: lock_release: 0xffff88003df5b520 &fs->lock
sleep-16133 [001] 158126.498456: kfree: call_site=810a7abb ptr=0x0
sleep-16133 [001] 158126.498460: sys_exit_write: 0x1
trace-cmd-16130 [003] 158126.498462: kmalloc: call_site=810bf95b ptr=0xffff88003dedc040 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO
To see only the kmalloc calls that were greater than 1000 bytes:
#trace-cmd report -F ´kmalloc: bytes_req > 1000´
<idle>-0 [000] 158128.126641: kmalloc: call_site=81330635 ptr=0xffff88003c2fd000 bytes_req=2096 bytes_alloc=4096 gfp_flags=GFP_ATOMIC
To see wakeups and sched switches that left the previous task in the
running state:
# trace-cmd report -F ´sched: prev_state == 0 || (success == 1)´
trace-cmd-16132 [002] 158126.499951: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=002
trace-cmd-16132 [002] 158126.500401: sched_switch: prev_comm=trace-cmd prev_pid=16132 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16129 next_prio=120
<idle>-0 [003] 158126.500585: sched_wakeup: comm=trace-cmd pid=16130 prio=120 success=1 target_cpu=003
<idle>-0 [003] 158126.501241: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16130 next_prio=120
trace-cmd-16132 [000] 158126.502475: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=000
trace-cmd-16131 [002] 158126.506516: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=002
<idle>-0 [003] 158126.550110: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16130 next_prio=120
trace-cmd-16131 [003] 158126.570243: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=003
trace-cmd-16130 [002] 158126.618202: sched_switch: prev_comm=trace-cmd prev_pid=16130 prev_prio=120 prev_state=R ==> next_comm=yum-updatesd next_pid=3088 next_prio=1 20
trace-cmd-16129 [003] 158126.622379: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=003
trace-cmd-16129 [000] 158126.649287: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=000
The above needs a little explanation. The filter specifies the "sched"
subsystem, which includes both sched_switch and sched_wakeup events.
Any event that does not have the format field "prev_state" or
"success", will evaluate those expressions as FALSE, and will not
produce a match. Using "||" will have the "prev_state" test happen for
the "sched_switch" event and the "success" test happen for the
"sched_wakeup" event.
# trace-cmd report -w -F ´sched_switch, sched_wakeup.*´
[...]
trace-cmd-16130 [003] 158131.580616: sched_wakeup: comm=trace-cmd pid=16131 prio=120 success=1 target_cpu=003
trace-cmd-16129 [000] 158131.581502: sched_switch: prev_comm=trace-cmd prev_pid=16129 prev_prio=120 prev_state=S ==> next_comm=trace-cmd next_pid=16131 next_prio=120 Latency: 885.901 usecs
trace-cmd-16131 [000] 158131.582414: sched_wakeup: comm=trace-cmd pid=16129 prio=120 success=1 target_cpu=000
trace-cmd-16132 [001] 158131.583219: sched_switch: prev_comm=trace-cmd prev_pid=16132 prev_prio=120 prev_state=S ==> next_comm=trace-cmd next_pid=16129 next_prio=120 Latency: 804.809 usecs
sleep-16133 [002] 158131.584121: sched_wakeup: comm=trace-cmd pid=16120 prio=120 success=1 target_cpu=002
trace-cmd-16129 [001] 158131.584128: sched_wakeup: comm=trace-cmd pid=16132 prio=120 success=1 target_cpu=001
sleep-16133 [002] 158131.584275: sched_switch: prev_comm=sleep prev_pid=16133 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=16120 next_prio=120 Latency: 153.915 usecs
trace-cmd-16130 [003] 158131.585284: sched_switch: prev_comm=trace-cmd prev_pid=16130 prev_prio=120 prev_state=S ==> next_comm=trace-cmd next_pid=16132 next_prio=120 Latency: 1155.677 usecs
Average wakeup latency: 26626.656 usecs
The above trace produces the wakeup latencies of the tasks. The
"sched_switch" event reports each individual latency after writing the
event information. At the end of the report, the average wakeup latency
is reported.
# trace-cmd report -w -F ´sched_switch, sched_wakeup.*: prio < 100 || next_prio < 100´
<idle>-0 [003] 158131.516753: sched_wakeup: comm=ksoftirqd/3 pid=13 prio=49 success=1 target_cpu=003
<idle>-0 [003] 158131.516855: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/3 next_pid=13 next_prio=49 Latency: 101.244 usecs
<idle>-0 [003] 158131.533781: sched_wakeup: comm=ksoftirqd/3 pid=13 prio=49 success=1 target_cpu=003
<idle>-0 [003] 158131.533897: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/3 next_pid=13 next_prio=49 Latency: 115.608 usecs
<idle>-0 [003] 158131.569730: sched_wakeup: comm=ksoftirqd/3 pid=13 prio=49 success=1 target_cpu=003
<idle>-0 [003] 158131.569851: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/3 next_pid=13 next_prio=49 Latency: 121.024 usecs
Average wakeup latency: 110.021 usecs
The above version will only show the wakeups and context switches of
Real Time tasks. The prio used inside the kernel starts at 0 for
highest priority. That is prio 0 is equivalent to user space real time
priority 99, and priority 98 is equivalent to user space real time
priority 1. Prios less than 100 represent Real Time tasks.
SEE ALSOtrace-cmd(1), trace-cmd-record(1), trace-cmd-start(1),
trace-cmd-stop(1), trace-cmd-extract(1), trace-cmd-reset(1),
trace-cmd-split(1), trace-cmd-list(1), trace-cmd-listen(1)AUTHOR
Written by Steven Rostedt, <rostedt@goodmis.org[1]>
RESOURCES
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
COPYING
Copyright (C) 2010 Red Hat, Inc. Free use of this software is granted
under the terms of the GNU Public License (GPL).
NOTES
1. rostedt@goodmis.org
mailto:rostedt@goodmis.org
[FIXME: source] 02/21/2013 TRACE-CMD-REPORT(1)