B(3pm) Perl Programmers Reference Guide B(3pm)NAMEB - The Perl Compiler
SYNOPSIS
use B;
DESCRIPTION
The "B" module supplies classes which allow a Perl program to delve
into its own innards. It is the module used to implement the "backends"
of the Perl compiler. Usage of the compiler does not require knowledge
of this module: see the O module for the user-visible part. The "B"
module is of use to those who want to write new compiler backends. This
documentation assumes that the reader knows a fair amount about perl's
internals including such things as SVs, OPs and the internal symbol
table and syntax tree of a program.
OVERVIEW
The "B" module contains a set of utility functions for querying the
current state of the Perl interpreter; typically these functions return
objects from the B::SV and B::OP classes, or their derived classes.
These classes in turn define methods for querying the resulting objects
about their own internal state.
Utility Functions
The "B" module exports a variety of functions: some are simple utility
functions, others provide a Perl program with a way to get an initial
"handle" on an internal object.
Functions Returning "B::SV", "B::AV", "B::HV", and "B::CV" objects
For descriptions of the class hierarchy of these objects and the
methods that can be called on them, see below, "OVERVIEW OF CLASSES"
and "SV-RELATED CLASSES".
sv_undef
Returns the SV object corresponding to the C variable "sv_undef".
sv_yes
Returns the SV object corresponding to the C variable "sv_yes".
sv_no
Returns the SV object corresponding to the C variable "sv_no".
svref_2object(SVREF)
Takes a reference to any Perl value, and turns the referred-to
value into an object in the appropriate B::OP-derived or
B::SV-derived class. Apart from functions such as "main_root", this
is the primary way to get an initial "handle" on an internal perl
data structure which can then be followed with the other access
methods.
The returned object will only be valid as long as the underlying
OPs and SVs continue to exist. Do not attempt to use the object
after the underlying structures are freed.
amagic_generation
Returns the SV object corresponding to the C variable
"amagic_generation".
init_av
Returns the AV object (i.e. in class B::AV) representing INIT
blocks.
check_av
Returns the AV object (i.e. in class B::AV) representing CHECK
blocks.
unitcheck_av
Returns the AV object (i.e. in class B::AV) representing UNITCHECK
blocks.
begin_av
Returns the AV object (i.e. in class B::AV) representing BEGIN
blocks.
end_av
Returns the AV object (i.e. in class B::AV) representing END
blocks.
comppadlist
Returns the AV object (i.e. in class B::AV) of the global
comppadlist.
regex_padav
Only when perl was compiled with ithreads.
main_cv
Return the (faked) CV corresponding to the main part of the Perl
program.
Functions for Examining the Symbol Table
walksymtable(SYMREF, METHOD, RECURSE, PREFIX)
Walk the symbol table starting at SYMREF and call METHOD on each
symbol (a B::GV object) visited. When the walk reaches package
symbols (such as "Foo::") it invokes RECURSE, passing in the symbol
name, and only recurses into the package if that sub returns true.
PREFIX is the name of the SYMREF you're walking.
For example:
# Walk CGI's symbol table calling print_subs on each symbol.
# Recurse only into CGI::Util::
walksymtable(\%CGI::, 'print_subs', sub { $_[0] eq 'CGI::Util::' },
'CGI::');
print_subs() is a B::GV method you have declared. Also see "B::GV
Methods", below.
Functions Returning "B::OP" objects or for walking op trees
For descriptions of the class hierarchy of these objects and the
methods that can be called on them, see below, "OVERVIEW OF CLASSES"
and "OP-RELATED CLASSES".
main_root
Returns the root op (i.e. an object in the appropriate
B::OP-derived class) of the main part of the Perl program.
main_start
Returns the starting op of the main part of the Perl program.
walkoptree(OP, METHOD)
Does a tree-walk of the syntax tree based at OP and calls METHOD on
each op it visits. Each node is visited before its children. If
"walkoptree_debug" (see below) has been called to turn debugging on
then the method "walkoptree_debug" is called on each op before
METHOD is called.
walkoptree_debug(DEBUG)
Returns the current debugging flag for "walkoptree". If the
optional DEBUG argument is non-zero, it sets the debugging flag to
that. See the description of "walkoptree" above for what the
debugging flag does.
Miscellaneous Utility Functions
ppname(OPNUM)
Return the PP function name (e.g. "pp_add") of op number OPNUM.
hash(STR)
Returns a string in the form "0x..." representing the value of the
internal hash function used by perl on string STR.
cast_I32(I)
Casts I to the internal I32 type used by that perl.
minus_c
Does the equivalent of the "-c" command-line option. Obviously,
this is only useful in a BEGIN block or else the flag is set too
late.
cstring(STR)
Returns a double-quote-surrounded escaped version of STR which can
be used as a string in C source code.
perlstring(STR)
Returns a double-quote-surrounded escaped version of STR which can
be used as a string in Perl source code.
class(OBJ)
Returns the class of an object without the part of the classname
preceding the first "::". This is used to turn "B::UNOP" into
"UNOP" for example.
threadsv_names
In a perl compiled for threads, this returns a list of the special
per-thread threadsv variables.
Exported utility variabiles
@optype
my $op_type = $optype[$op_type_num];
A simple mapping of the op type number to its type (like 'COP' or
'BINOP').
@specialsv_name
my $sv_name = $specialsv_name[$sv_index];
Certain SV types are considered 'special'. They're represented by
B::SPECIAL and are referred to by a number from the specialsv_list.
This array maps that number back to the name of the SV (like
'Nullsv' or '&PL_sv_undef').
OVERVIEW OF CLASSES
The C structures used by Perl's internals to hold SV and OP information
(PVIV, AV, HV, ..., OP, SVOP, UNOP, ...) are modelled on a class
hierarchy and the "B" module gives access to them via a true object
hierarchy. Structure fields which point to other objects (whether types
of SV or types of OP) are represented by the "B" module as Perl objects
of the appropriate class.
The bulk of the "B" module is the methods for accessing fields of these
structures.
Note that all access is read-only. You cannot modify the internals by
using this module. Also, note that the B::OP and B::SV objects created
by this module are only valid for as long as the underlying objects
exist; their creation doesn't increase the reference counts of the
underlying objects. Trying to access the fields of a freed object will
give incomprehensible results, or worse.
SV-RELATED CLASSES
B::IV, B::NV, B::RV, B::PV, B::PVIV, B::PVNV, B::PVMG, B::BM (5.9.5 and
earlier), B::PVLV, B::AV, B::HV, B::CV, B::GV, B::FM, B::IO. These
classes correspond in the obvious way to the underlying C structures of
similar names. The inheritance hierarchy mimics the underlying C
"inheritance". For the 5.10.x branch, (ie 5.10.0, 5.10.1 etc) this is:
B::SV
|
+------------+------------+------------+
| | | |
B::PV B::IV B::NV B::RV
\ / /
\ / /
B::PVIV /
\ /
\ /
\ /
B::PVNV
|
|
B::PVMG
|
+-----+-----+-----+-----+
| | | | |
B::AV B::GV B::HV B::CV B::IO
| |
| |
B::PVLV B::FM
For 5.9.0 and earlier, PVLV is a direct subclass of PVMG, and BM is
still present as a distinct type, so the base of this diagram is
|
|
B::PVMG
|
+------+-----+-----+-----+-----+-----+
| | | | | | |
B::PVLV B::BM B::AV B::GV B::HV B::CV B::IO
|
|
B::FM
For 5.11.0 and later, B::RV is abolished, and IVs can be used to store
references, and a new type B::REGEXP is introduced, giving this
structure:
B::SV
|
+------------+------------+
| | |
B::PV B::IV B::NV
\ / /
\ / /
B::PVIV /
\ /
\ /
\ /
B::PVNV
|
|
B::PVMG
|
+-------+-------+---+---+-------+-------+
| | | | | |
B::AV B::GV B::HV B::CV B::IO B::REGEXP
| |
| |
B::PVLV B::FM
Access methods correspond to the underlying C macros for field access,
usually with the leading "class indication" prefix removed (Sv, Av, Hv,
...). The leading prefix is only left in cases where its removal would
cause a clash in method name. For example, "GvREFCNT" stays as-is since
its abbreviation would clash with the "superclass" method "REFCNT"
(corresponding to the C function "SvREFCNT").
B::SV Methods
REFCNT
FLAGS
object_2svref
Returns a reference to the regular scalar corresponding to this
B::SV object. In other words, this method is the inverse operation
to the svref_2object() subroutine. This scalar and other data it
points at should be considered read-only: modifying them is neither
safe nor guaranteed to have a sensible effect.
B::IV Methods
IV Returns the value of the IV, interpreted as a signed integer. This
will be misleading if "FLAGS & SVf_IVisUV". Perhaps you want the
"int_value" method instead?
IVX
UVX
int_value
This method returns the value of the IV as an integer. It differs
from "IV" in that it returns the correct value regardless of
whether it's stored signed or unsigned.
needs64bits
packiv
B::NV Methods
NV
NVX
B::RV Methods
RV
B::PV Methods
PV This method is the one you usually want. It constructs a string
using the length and offset information in the struct: for ordinary
scalars it will return the string that you'd see from Perl, even if
it contains null characters.
RV Same as B::RV::RV, except that it will die() if the PV isn't a
reference.
PVX This method is less often useful. It assumes that the string stored
in the struct is null-terminated, and disregards the length
information.
It is the appropriate method to use if you need to get the name of
a lexical variable from a padname array. Lexical variable names are
always stored with a null terminator, and the length field (SvCUR)
is overloaded for other purposes and can't be relied on here.
B::PVMG Methods
MAGIC
SvSTASH
B::MAGIC Methods
MOREMAGIC
precomp
Only valid on r-magic, returns the string that generated the
regexp.
PRIVATE
TYPE
FLAGS
OBJ Will die() if called on r-magic.
PTR
REGEX
Only valid on r-magic, returns the integer value of the REGEX
stored in the MAGIC.
B::PVLV Methods
TARGOFF
TARGLEN
TYPE
TARG
B::BM Methods
USEFUL
PREVIOUS
RARE
TABLE
B::GV Methods
is_empty
This method returns TRUE if the GP field of the GV is NULL.
NAME
SAFENAME
This method returns the name of the glob, but if the first
character of the name is a control character, then it converts it
to ^X first, so that *^G would return "^G" rather than "\cG".
It's useful if you want to print out the name of a variable. If
you restrict yourself to globs which exist at compile-time then the
result ought to be unambiguous, because code like "${"^G"} = 1" is
compiled as two ops - a constant string and a dereference (rv2gv) -
so that the glob is created at runtime.
If you're working with globs at runtime, and need to disambiguate
*^G from *{"^G"}, then you should use the raw NAME method.
STASH
SV
IO
FORM
AV
HV
EGV
CV
CVGEN
LINE
FILE
FILEGV
GvREFCNT
FLAGS
B::IO Methods
LINES
PAGE
PAGE_LEN
LINES_LEFT
TOP_NAME
TOP_GV
FMT_NAME
FMT_GV
BOTTOM_NAME
BOTTOM_GV
SUBPROCESS
IoTYPE
IoFLAGS
IsSTD
Takes one arguments ( 'stdin' | 'stdout' | 'stderr' ) and returns
true if the IoIFP of the object is equal to the handle whose name
was passed as argument ( i.e. $io->IsSTD('stderr') is true if
IoIFP($io) == PerlIO_stdin() ).
B::AV Methods
FILL
MAX
ARRAY
ARRAYelt
Like "ARRAY", but takes an index as an argument to get only one
element, rather than a list of all of them.
OFF This method is deprecated if running under Perl 5.8, and is no
longer present if running under Perl 5.9
AvFLAGS
This method returns the AV specific flags. In Perl 5.9 these are
now stored in with the main SV flags, so this method is no longer
present.
B::CV Methods
STASH
START
ROOT
GV
FILE
DEPTH
PADLIST
OUTSIDE
OUTSIDE_SEQ
XSUB
XSUBANY
For constant subroutines, returns the constant SV returned by the
subroutine.
CvFLAGS
const_sv
B::HV Methods
FILL
MAX
KEYS
RITER
NAME
ARRAY
PMROOT
This method is not present if running under Perl 5.9, as the PMROOT
information is no longer stored directly in the hash.
OP-RELATED CLASSES
"B::OP", "B::UNOP", "B::BINOP", "B::LOGOP", "B::LISTOP", "B::PMOP",
"B::SVOP", "B::PADOP", "B::PVOP", "B::LOOP", "B::COP".
These classes correspond in the obvious way to the underlying C
structures of similar names. The inheritance hierarchy mimics the
underlying C "inheritance":
B::OP
|
+---------------+--------+--------+-------+
| | | | |
B::UNOP B::SVOP B::PADOP B::COP B::PVOP
,' `-.
/ `--.
B::BINOP B::LOGOP
|
|
B::LISTOP
,' `.
/ \
B::LOOP B::PMOP
Access methods correspond to the underlying C structre field names,
with the leading "class indication" prefix ("op_") removed.
B::OP Methods
These methods get the values of similarly named fields within the OP
data structure. See top of "op.h" for more info.
next
sibling
name
This returns the op name as a string (e.g. "add", "rv2av").
ppaddr
This returns the function name as a string (e.g.
"PL_ppaddr[OP_ADD]", "PL_ppaddr[OP_RV2AV]").
desc
This returns the op description from the global C PL_op_desc array
(e.g. "addition" "array deref").
targ
type
opt
flags
private
spare
B::UNOP METHOD
first
B::BINOP METHOD
last
B::LOGOP METHOD
other
B::LISTOP METHOD
children
B::PMOP Methods
pmreplroot
pmreplstart
pmnext
Only up to Perl 5.9.4
pmregexp
pmflags
extflags
Since Perl 5.9.5
precomp
pmoffset
Only when perl was compiled with ithreads.
B::SVOP METHOD
sv
gv
B::PADOP METHOD
padix
B::PVOP METHOD
pv
B::LOOP Methods
redoop
nextop
lastop
B::COP Methods
label
stash
stashpv
file
cop_seq
arybase
line
warnings
io
hints
hints_hash
AUTHOR
Malcolm Beattie, "mbeattie@sable.ox.ac.uk"
perl v5.10.1 2009-02-12 B(3pm)
