PERFQUERY(8) Open IB Diagnostics PERFQUERY(8)NAMEPERFQUERY-
query InfiniBand port counters on a single port
SYNOPSIS
perfquery [options] [<lid|guid> [[port] [reset_mask]]]
DESCRIPTION
perfquery uses PerfMgt GMPs to obtain the PortCounters (basic perfor‐
mance and error counters), PortExtendedCounters, PortXmitDataSL, PortR‐
cvDataSL, PortRcvErrorDetails, PortXmitDiscardDetails, PortExtended‐
SpeedsCounters, or PortSamplesControl from the PMA at the node/port
specified. Optionally shows aggregated counters for all ports of node.
Finally it can, reset after read, or just reset the counters.
Note: In PortCounters, PortCountersExtended, PortXmitDataSL, and PortR‐
cvDataSL, components that represent Data (e.g. PortXmitData and PortR‐
cvData) indicate octets divided by 4 rather than just octets.
Note: Inputting a port of 255 indicates an operation be performed on
all ports.
OPTIONS
-x, --extended
show extended port counters rather than (basic) port counters.
Note that extended port counters attribute is optional.
-X, --xmtsl
show transmit data SL counter. This is an optional counter for
QoS.
-S, --rcvsl
show receive data SL counter. This is an optional counter for
QoS.
-D, --xmtdisc
show transmit discard details. This is an optional counter.
-E, --rcverr
show receive error details. This is an optional counter.
-D, --xmtdisc
show transmit discard details. This is an optional counter.
-T, --extended_speeds
show extended speeds port counters. This is an optional counter.
--oprcvcounters
show Rcv Counters per Op code. This is an optional counter.
--flowctlcounters
show flow control counters. This is an optional counter.
--vloppackets
show packets received per Op code per VL. This is an optional
counter.
--vlopdata
show data received per Op code per VL. This is an optional
counter.
--vlxmitflowctlerrors
show flow control update errors per VL. This is an optional
counter.
--vlxmitcounters
show ticks waiting to transmit counters per VL. This is an
optional counter.
--swportvlcong
show sw port VL congestion. This is an optional counter.
--rcvcc
show Rcv congestion control counters. This is an optional
counter.
--slrcvfecn
show SL Rcv FECN counters. This is an optional counter.
--slrcvbecn
show SL Rcv BECN counters. This is an optional counter.
--xmitcc
show Xmit congestion control counters. This is an optional
counter.
--vlxmittimecc
show VL Xmit Time congestion control counters. This is an
optional counter.
-c, --smplctl
show port samples control.
-a, --all_ports
show aggregated counters for all ports of the destination lid or
reset all counters for all ports. If the destination lid does
not support the AllPortSelect flag, all ports will be iterated
through to emulate AllPortSelect behavior.
-l, --loop_ports
If all ports are selected by the user (either through the -a
option or port 255) iterate through each port rather than doing
than aggregate operation.
-r, --reset_after_read
reset counters after read
-R, --Reset_only
only reset counters
Addressing Flags
-G, --Guid The address specified is a Port GUID
-L, --Lid The address specified is a LID
-s, --sm_port <smlid> use 'smlid' as the target lid for SA queries.
Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is speci‐
fied (see the "local umad parameters" below), the libibumad library
selects the port to use by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the libibumad library
attempts to fulfill the user request, and will fail if it is not
possible.
For example:
ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
Debugging flags
-d raise the IB debugging level. May be used several times (-ddd
or -d -d -d).
-e show send and receive errors (timeouts and others)
-h, --help show the usage message
-v, --verbose
increase the application verbosity level. May be used several
times (-vv or -v -v -v)
-V, --version show the version info.
Configuration flags
-t, --timeout <timeout_ms> override the default timeout for the
solicited mads.
-y, --m_key <key>
use the specified M_key for requests. If non-numeric value (like
'x') is specified then a value will be prompted for.
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband-diags/ibdiag.conf
FILES
CONFIG FILE
/etc/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for
all tools. See supplied config file for details.
EXAMPLES
:: perfquery # read local port performance counters
perfquery 32 1 # read performance counters from lid
32, port 1 perfquery -x 32 1 # read extended performance
counters from lid 32, port 1 perfquery -a 32 # read
perf counters from lid 32, all ports perfquery -r 32 1 #
read performance counters and reset perfquery -x -r 32 1 #
read extended performance counters and reset perfquery -R 0x20 1
# reset performance counters of port 1 only perfquery -x -R 0x20
1 # reset extended performance counters of port 1 only perf‐
query -R -a 32 # reset performance counters of all ports
perfquery -R 32 2 0x0fff # reset only error counters of port 2
perfquery -R 32 2 0xf000 # reset only non-error counters of port
2
AUTHOR
Hal Rosenstock
< hal.rosenstock@gmail.com >
PERFQUERY(8)