SNMPD(8) OpenBSD System Manager's Manual SNMPD(8)NAMEsnmpd - Simple Network Management Protocol daemon
SYNOPSISsnmpd [-dNnv] [-D macro=value] [-f file] [-r path]
DESCRIPTIONsnmpd is a daemon which implements the SNMP protocol.
The options are as follows:
-D macro=value
Define macro to be set to value on the command line. Overrides
the definition of macro in the configuration file.
-d Do not daemonize and log to stderr.
-f file
Use file as the configuration file, instead of the default
/etc/snmpd.conf.
-N Show numeric OID values instead of their symbolic names.
-n Configtest mode. Only check the configuration file for validity.
-r path
Open a second, restricted, control socket that snmpctl(8) can
use. Only trap requests are allowed on this socket.
-v Produce more verbose output.
FILES
/etc/snmpd.conf default snmpd configuration file
/var/run/snmpd.sock default snmpd control socket
/usr/share/snmp/mibs/* snmpd Management Information Base definitions
SEE ALSOsnmpd.conf(5), snmpctl(8)
A Simple Network Management Protocol (SNMP), RFC 1157, May 1990.
SNMP Version 3 (SNMPv3), http://www.ibr.cs.tu-bs.de/projects/snmpv3/,
March 2002.
Introduction and Applicability Statements for Internet Standard
Management Framework, RFC 3410, December 2002.
HISTORY
The snmpd program first appeared in OpenBSD 4.3.
AUTHORS
The snmpd program was written by Reyk Floeter <reyk@vantronix.net>.
CAVEATSsnmpd does not fully work yet.
OpenBSD 4.9 May 24, 2010 OpenBSD 4.9