TUR(8)TUR(8)NAME
tur - test unit ready
SYNOPSIS
tur [ -a b.t.l ] [ -l ]
DESCRIPTION
The tur program will send a TEST UNIT READY command to all SCSI devices
attached to the system.
-a b.t.l
Selects a specific ordinal SCSI address, where b is the logical
SCSI bus, t is the SCSI target, and l is the SCSI logical unit
number (LUN) on that target. See libscsi(8).
-l Performs a complete LUN search for all SCSI adapters in the sys‐
tem. This argument is accepted on all systems, but does not
have any effect on HP-UX systems. Due to the method used to scan
for available devices on HP-UX systems, all accessible devices
are always shown, and the -l option has no additional effect.
On all other systems, checking starts at LUN 0 for SCSI devices.
The first empty LUN found will end the search for a given target
ID. With the -l option, all LUNS present on all target IDs for
all SCSI busses in the system will be checked for devices. This
can take a very long time and should therefore be used only when
necessary. For example, a Fibre Channel adapter can support 126
target IDs, each of which may have 80 or more LUNs. Checking all
LUNs on this single adapter may take over 10 minutes.
SEE ALSOlibscsi(8)NetWorker 7.3.2 Aug 23, 06 TUR(8)