XEDIT(1)XEDIT(1)NAMExedit - simple text editor for X
SYNTAXxedit [ -toolkitoption ... ] [ filename ... ]
DESCRIPTION
Xedit provides a window consisting of the following four areas:
Commands Section A set of commands that allow you to exit
xedit, save the file, or load a new file into
the edit window.
Message Window Displays xedit messages. In addition, this
window can be also used as a scratch pad.
Filename Display Displays the name of the file currently being
edited, and whether this file is Read-Write or
Read Only.
Edit Window Displays the text of the file that you are
editing or creating.
OPTIONS
Xedit accepts all of the standard X Toolkit command line options (see
X(7)). The order of the command line options is not important.
filename
Specifies the file(s) that are to be loaded during start-up.
This is the file which will be edited. If a file is not speci‐
fied, xedit lets you load files or create new files after it
has started up.
EDITING
The Athena Text widget is used for the three sections of this applica‐
tion that allow text input. The characters typed will go to the Text
widget that has the input focus, or the Text widget that the pointer
cursor is currently over.
The following keystroke combinations are defined:
Ctrl-a Beginning Of Line
Meta-b Backward Word
Ctrl-b Backward Character
Meta-f Forward Word
Ctrl-d Delete Next Character
Meta-i Insert File
Ctrl-e End Of Line
Meta-k Kill To End Of Paragraph
Ctrl-f Forward Character
Meta-q Form Paragraph
Ctrl-g Keyboard Reset
Meta-v Previous Page
Ctrl-h Delete Previous Character
Meta-y Insert Current Selection
Ctrl-j Newline And Indent
Meta-z Scroll One Line Down
Ctrl-k Kill To End Of Line
Meta-d Delete Next Word
Ctrl-l Redraw Display
Meta-D Kill Word
Ctrl-m Newline
Delete Previous Word
Ctrl-n Next Line
Meta-H Backward Kill Word
Ctrl-o Newline And Backup
Meta-< Beginning Of File
Ctrl-p Previous Line
Meta-> End Of File
Ctrl-r Search/Replace Backward
Meta-] Forward Paragraph
Ctrl-s Search/Replace Forward
Meta-[ Backward Paragraph
Ctrl-t Transpose Characters
Ctrl-u [number] Multiply by 4 or number
Meta-Delete Delete Previous Word
Ctrl-v Next Page
Meta-Shift Delete Kill Previous Word
Ctrl-w Kill Selection
Meta-Backspace Delete Previous Word
Ctrl-y Unkill
Kill Previous Word
Ctrl-z Scroll One Line Up
Meta-z Scroll One Line Down
Ctrl-_ Undo
Escape Line Edit Mode
In addition, the pointer may be used to cut and paste text:
Button 1 Down Start Selection
Button 1 Motion Adjust Selection
Button 1 Up End Selection (cut)
Button 2 Down Insert Current Selection (paste)
Button 3 Down Extend Current Selection
Button 3 Motion Adjust Selection
Button 3 Up End Selection (cut)
LINE EDIT MODE
Line edit mode enables several shortcut commands for searching and
xedit buffer.ing text in a
Line edit mode
commands have the format:
[line-number[,line-number]]command[parameters]
Line number may be specified as:
The current text line.
The last line of the file.
The literaleline number.
The previous^line. Equivalent to -1.
-number or ^number
The current line minus number.
The next line. Equivalent to +1.
The currentbline plus number.
From the first to the last line. Equivalent to 1,$.
From the current to the last line. Equivalent to .,$.
Command
may be specified as:
Substitute text in the specified lines.
Search forward for the regular expression pattern re.
Search backward for the regular expression pattern re.
Parameters
may be specified as:
Works asra/parameter to i or as a command.
/re/text/
Search forward for re and substitute by text.
Options
may follow or be parameters, known values are:
Case insensitive search.
Global match when replacing text. Unless specified, only the nth,
that defaults to 1, match will be replaced.
Confirmcbefore replacing text.
Replacenonlyrthe occurrence referenced by number.
Commands accept some variations, examples:
/pattern/i
i/pattern/
i/pattern
Search forward for pattern.
,sc/pattern/text
,sc/pattern/text/
,s/pattern/text/c
withctext. entire buffer and ask confirmation to replace pattern
,s/pattern/text/number
defaultstto thecfirstboccurrence.ext line. If not specified,
When searching for text, type <Return> to go to the next match.
When interactively replacing text, type y or Y to accept the
change, and n or N to ignore it and go to the next match.
COMMANDS
Quit Quits the current editing session. If any changes have not been
xedit saved,
displays a warning message, allowing the user to save them.
Save If file backups are enabled (see RESOURCES, below)
xedit
stores a copy of the
original, unedited file in <prefix>file<suffix>,
then overwrites the file with the contents of the edit window. The
filename is retrieved from the Text widget directly to the right of
the Load button.
Load Loads the file named in the text widget immediately to the right
of the this button and displays it in the Edit window.
RESOURCES
For xedit the available resources are:
tagsName (Class TagsName)
Specifies the name of the tags file to search when loading a new file.
Default value is tags.
loadTags (Class LoadTags)
Boolean value to enable or disabling searching for tags files.
Default is True.
enableBackups (Class EnableBackups)
Specifies that, when edits made to an existing file are saved,
xedit
is to copy the original version of that file to <prefix>file<suffix>
before it saves the changes. The default value for this resource is
``on,'' stating that backups should be created.
backupNamePrefix (Class BackupNamePrefix)
Specifies a string that is to be prepended to the backup filename. The
default is that no string shall be prepended.
backupNameSuffix (Class BackupNameSuffix)
Specifies a string that is to be appended to the backup filename. The
default is to use ``~'' as the suffix.
positionFormat (Class Format)
Specifies a format string used to display the cursor position. This
string uses printf(3) like notation, where
%l
prints the line number,
%c
prints the column number,
%p
prints the insert position offset, and
%s
prints the current file size. It is also allowed to specify field sizes,
with the notation
%-?[0-9]+
. The default format string is ``L%l'', which shows the character ``L''
followed by the line number.
hints (Class Hints)
Specifies a list of strings, separated by new lines, that will be
displayed in the bc_label window.
hintsInterval (Class Interval)
Specifies the interval in seconds, which the hint string in the bc_label
window will be changed.
changedBitmap (Class Bitmap)
Specifies the name of the Bitmap that will be displayed in the fileMenu, when
the file being edited is changed.
autoReplace (Class Replace)
This resource is useful to automatically correct common misspelling errors, but
can also be used to create simple macros. The format is
{non-blanks}{blanks}[{string}]. Fields are separated by newlines.
Example of use:
nto not\nmacro some long string with \\\n newlines \\\n
Will automatically replace the word nto by not, and /macro
by some long string with
newlines
when you type that words.
ispell.dictionaries (Class ispell.Dictionary)
Specifies a list of dictionary names, separated by spaces, available to the
ispell program. The default value is "american americamed+ english".
ispell.dictionary (Class ispell.Dictionary)
Specifies the default dictionary to use.
ispell*<DICTIONARY>.wordChars (Class ispell*Chars)
Specifies a set of characters that can be part of a legal word. The
<DICTIONARY> field is one of the dictionaries specified in the
dictionaries resource.
ispell.ispellCommand (Class ispell.CommandLine)
The path to the ispell program, and possibly, additional arguments. You don't
need to specify the ``-w'' option, neither the ``-a'' option.
Refer to the ispell(1) manpage for more information on ispell options.
ispell.formatting (Class ispell.TextFormat)
Specifies which text formatting to use while spell checking the file. The
available formats are text and html.
ispell*text.skipLines (Class ispell*text.Skip)
Lines starting with one of the characters in this string will not be spell
checked. This resource is only used in text mode.
ispell.terseMode (Class ispell.Terse)
When enabled, runs ispell in terse mode, not asking user interaction for words
generated through compound formation (when using the ispell ``-C'' option), or
words generated through affix removal. The default value is False.
ispell.lookCommand (Class ispell.CommandLine)
The path to the program to search for alternate words, and possibly,
additional arguments. The default program used is /usr/bin/egrep.
ispell.wordsFile (Class ispell.Words)
The path to the file[s] to search for alternate words. The default file is
/usr/share/dict/words.
ispell.guessLabel (Class ispell.Status)
String displayed in the ispell status bar when ispell returns a guess list
of one or more words. The default value is Guess.
ispell.missLabel (Class ispell.Status)
String displayed in the ispell status bar when ispell returns a list of one
or more words to match a misspelled one. The default value is Miss.
ispell.rootLabel (Class ispell.Status)
String displayed in the ispell status bar when the word is not in the dictionary,
but it can be formed through a root one. The default value is Root:, and is
followed by a space and the root word.
ispell.noneLabel (Class ispell.Status)
String displayed in the ispell status bar when there is no near misses. The default
value is None.
ispell.compoundLabel (Class ispell.Status)
String displayed in the ispell status bar when the word being checked is formed by
concatenation of two words. The default value is Compound.
ispell.okLabel (Class ispell.Status)
String displayed in the ispell status bar when the checked word is in the dictionary.
This string is only displayed when using the check button in the xedit ispell
interface. The default value is Ok.
ispell.eofLabel (Class ispell.Status)
The string displayed in the ispell status bar when the end of the file is reached.
The default value is End Of File.
ispell.repeatLabel (Class ispell.Status)
The string displayed in the ispell status bar when two identical words are found
together in the file. The default value is Repeat.
ispell.lookLabel (Class ispell.Status)
The string displayed in the ispell status bar after displaying the results of
the Look command. If no results are found, the value of the
ispell.noneLabel resource is shown.
ispell.workingLabel (Class ispell.Status)
The string displayed in the ispell status bar while xedit is communicating with
ispell. The default value is ....
WIDGETS
the widgetsrwhichocomposeyxedit.rcIn,the notationlbelow,ow the hierarchy of
indentation indicates hierarchical structure. The widget class name
is given first, followed by the widget instance name.
Xedit xedit
Paned paned
Paned buttons
Command quit
Command save
Command load
Text filename
Label bc_label
Text messageWindow
Label labelWindow
Text editWindow
ENVIRONMENT
DISPLAY to get the default host and display number.
XENVIRONMENT to get the name of a resource file that overrides the global resources
stored in the RESOURCE_MANAGER property.
FILES
/etc/X11/app-defaults/Xedit
specifies required resources
SEE ALSO
X(7), xrdb(1), Athena Widget Set
RESTRICTIONS
Xedit is not a replacement to Emacs.
COPYRIGHT
Copyrightp1989,tX1Consortiumal Equipment Corporation.
Copyright 1998, The XFree86 Project
See
X(7)
for a full statement of rights and permissions.
AUTHORS
Paulo CesarsPereiraedeoAndrade, ThesXFree86 Project
X Version 11xedit 1.2.1 XEDIT(1)