PERLUNIINTRO(1) Perl Programmers Reference Guide PERLUNIINTRO(1)NAMEperluniintro - Perl Unicode introduction
DESCRIPTION
This document gives a general idea of Unicode and how to use Unicode in
Perl.
Unicode
Unicode is a character set standard which plans to codify all of the
writing systems of the world, plus many other symbols.
Unicode and ISO/IEC 10646 are coordinated standards that provide code
points for characters in almost all modern character set standards,
covering more than 30 writing systems and hundreds of languages,
including all commercially-important modern languages. All characters
in the largest Chinese, Japanese, and Korean dictionaries are also
encoded. The standards will eventually cover almost all characters in
more than 250 writing systems and thousands of languages. Unicode 1.0
was released in October 1991, and 4.0 in April 2003.
A Unicode character is an abstract entity. It is not bound to any
particular integer width, especially not to the C language "char".
Unicode is language-neutral and display-neutral: it does not encode the
language of the text, and it does not generally define fonts or other
graphical layout details. Unicode operates on characters and on text
built from those characters.
Unicode defines characters like "LATIN CAPITAL LETTER A" or "GREEK
SMALL LETTER ALPHA" and unique numbers for the characters, in this case
0x0041 and 0x03B1, respectively. These unique numbers are called code
points.
The Unicode standard prefers using hexadecimal notation for the code
points. If numbers like 0x0041 are unfamiliar to you, take a peek at a
later section, "Hexadecimal Notation". The Unicode standard uses the
notation "U+0041 LATIN CAPITAL LETTER A", to give the hexadecimal code
point and the normative name of the character.
Unicode also defines various properties for the characters, like
"uppercase" or "lowercase", "decimal digit", or "punctuation"; these
properties are independent of the names of the characters.
Furthermore, various operations on the characters like uppercasing,
lowercasing, and collating (sorting) are defined.
A Unicode logical "character" can actually consist of more than one
internal actual "character" or code point. For Western languages, this
is adequately modelled by a base character (like "LATIN CAPITAL LETTER
A") followed by one or more modifiers (like "COMBINING ACUTE ACCENT").
This sequence of base character and modifiers is called a combining
character sequence. Some non-western languages require more
complicated models, so Unicode created the grapheme cluster concept,
and then the extended grapheme cluster. For example, a Korean Hangul
syllable is considered a single logical character, but most often
consists of three actual Unicode characters: a leading consonant
followed by an interior vowel followed by a trailing consonant.
Whether to call these extended grapheme clusters "characters" depends
on your point of view. If you are a programmer, you probably would tend
towards seeing each element in the sequences as one unit, or
"character". The whole sequence could be seen as one "character",
however, from the user's point of view, since that's probably what it
looks like in the context of the user's language.
With this "whole sequence" view of characters, the total number of
characters is open-ended. But in the programmer's "one unit is one
character" point of view, the concept of "characters" is more
deterministic. In this document, we take that second point of view:
one "character" is one Unicode code point.
For some combinations, there are precomposed characters. "LATIN
CAPITAL LETTER A WITH ACUTE", for example, is defined as a single code
point. These precomposed characters are, however, only available for
some combinations, and are mainly meant to support round-trip
conversions between Unicode and legacy standards (like the ISO 8859).
In the general case, the composing method is more extensible. To
support conversion between different compositions of the characters,
various normalization forms to standardize representations are also
defined.
Because of backward compatibility with legacy encodings, the "a unique
number for every character" idea breaks down a bit: instead, there is
"at least one number for every character". The same character could be
represented differently in several legacy encodings. The converse is
also not true: some code points do not have an assigned character.
Firstly, there are unallocated code points within otherwise used
blocks. Secondly, there are special Unicode control characters that do
not represent true characters.
A common myth about Unicode is that it is "16-bit", that is, Unicode is
only represented as 0x10000 (or 65536) characters from 0x0000 to
0xFFFF. This is untrue. Since Unicode 2.0 (July 1996), Unicode has
been defined all the way up to 21 bits (0x10FFFF), and since Unicode
3.1 (March 2001), characters have been defined beyond 0xFFFF. The
first 0x10000 characters are called the Plane 0, or the Basic
Multilingual Plane (BMP). With Unicode 3.1, 17 (yes, seventeen) planes
in all were definedO-but they are nowhere near full of defined
characters, yet.
Another myth is about Unicode blocksO-that they have something to do
with languagesO-that each block would define the characters used by a
language or a set of languages. This is also untrue. The division into
blocks exists, but it is almost completely accidentalO-an artifact of
how the characters have been and still are allocated. Instead, there
is a concept called scripts, which is more useful: there is "Latin"
script, "Greek" script, and so on. Scripts usually span varied parts
of several blocks. For more information about scripts, see "Scripts"
in perlunicode.
The Unicode code points are just abstract numbers. To input and output
these abstract numbers, the numbers must be encoded or serialised
somehow. Unicode defines several character encoding forms, of which
UTF-8 is perhaps the most popular. UTF-8 is a variable length encoding
that encodes Unicode characters as 1 to 6 bytes. Other encodings
include UTF-16 and UTF-32 and their big- and little-endian variants
(UTF-8 is byte-order independent) The ISO/IEC 10646 defines the UCS-2
and UCS-4 encoding forms.
For more information about encodingsO-for instance, to learn what
surrogates and byte order marks (BOMs) areO-see perlunicode.
Perl's Unicode Support
Starting from Perl 5.6.0, Perl has had the capacity to handle Unicode
natively. Perl 5.8.0, however, is the first recommended release for
serious Unicode work. The maintenance release 5.6.1 fixed many of the
problems of the initial Unicode implementation, but for example regular
expressions still do not work with Unicode in 5.6.1.
Starting from Perl 5.8.0, the use of "use utf8" is needed only in much
more restricted circumstances. In earlier releases the "utf8" pragma
was used to declare that operations in the current block or file would
be Unicode-aware. This model was found to be wrong, or at least
clumsy: the "Unicodeness" is now carried with the data, instead of
being attached to the operations. Only one case remains where an
explicit "use utf8" is needed: if your Perl script itself is encoded in
UTF-8, you can use UTF-8 in your identifier names, and in string and
regular expression literals, by saying "use utf8". This is not the
default because scripts with legacy 8-bit data in them would break.
See utf8.
Perl's Unicode Model
Perl supports both pre-5.6 strings of eight-bit native bytes, and
strings of Unicode characters. The principle is that Perl tries to
keep its data as eight-bit bytes for as long as possible, but as soon
as Unicodeness cannot be avoided, the data is (mostly) transparently
upgraded to Unicode. There are some problemsO-see "The "Unicode Bug""
in perlunicode.
Internally, Perl currently uses either whatever the native eight-bit
character set of the platform (for example Latin-1) is, defaulting to
UTF-8, to encode Unicode strings. Specifically, if all code points in
the string are 0xFF or less, Perl uses the native eight-bit character
set. Otherwise, it uses UTF-8.
A user of Perl does not normally need to know nor care how Perl happens
to encode its internal strings, but it becomes relevant when outputting
Unicode strings to a stream without a PerlIO layer (one with the
"default" encoding). In such a case, the raw bytes used internally
(the native character set or UTF-8, as appropriate for each string)
will be used, and a "Wide character" warning will be issued if those
strings contain a character beyond 0x00FF.
For example,
perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
produces a fairly useless mixture of native bytes and UTF-8, as well as
a warning:
Wide character in print at ...
To output UTF-8, use the ":encoding" or ":utf8" output layer.
Prepending
binmode(STDOUT, ":utf8");
to this sample program ensures that the output is completely UTF-8, and
removes the program's warning.
You can enable automatic UTF-8-ification of your standard file handles,
default "open()" layer, and @ARGV by using either the "-C" command line
switch or the "PERL_UNICODE" environment variable, see perlrun for the
documentation of the "-C" switch.
Note that this means that Perl expects other software to work, too: if
Perl has been led to believe that STDIN should be UTF-8, but then STDIN
coming in from another command is not UTF-8, Perl will complain about
the malformed UTF-8.
All features that combine Unicode and I/O also require using the new
PerlIO feature. Almost all Perl 5.8 platforms do use PerlIO, though:
you can see whether yours is by running "perl -V" and looking for
"useperlio=define".
Unicode and EBCDIC
Perl 5.8.0 also supports Unicode on EBCDIC platforms. There, Unicode
support is somewhat more complex to implement since additional
conversions are needed at every step.
Later Perl releases have added code that will not work on EBCDIC
platforms, and no one has complained, so the divergence has continued.
If you want to run Perl on an EBCDIC platform, send email to
perlbug@perl.org
On EBCDIC platforms, the internal Unicode encoding form is UTF-EBCDIC
instead of UTF-8. The difference is that as UTF-8 is "ASCII-safe" in
that ASCII characters encode to UTF-8 as-is, while UTF-EBCDIC is
"EBCDIC-safe".
Creating Unicode
To create Unicode characters in literals for code points above 0xFF,
use the "\x{...}" notation in double-quoted strings:
my $smiley = "\x{263a}";
Similarly, it can be used in regular expression literals
$smiley =~ /\x{263a}/;
At run-time you can use "chr()":
my $hebrew_alef = chr(0x05d0);
See "Further Resources" for how to find all these numeric codes.
Naturally, "ord()" will do the reverse: it turns a character into a
code point.
Note that "\x.." (no "{}" and only two hexadecimal digits), "\x{...}",
and "chr(...)" for arguments less than 0x100 (decimal 256) generate an
eight-bit character for backward compatibility with older Perls. For
arguments of 0x100 or more, Unicode characters are always produced. If
you want to force the production of Unicode characters regardless of
the numeric value, use "pack("U", ...)" instead of "\x..", "\x{...}",
or "chr()".
You can also use the "charnames" pragma to invoke characters by name in
double-quoted strings:
use charnames ':full';
my $arabic_alef = "\N{ARABIC LETTER ALEF}";
And, as mentioned above, you can also "pack()" numbers into Unicode
characters:
my $georgian_an = pack("U", 0x10a0);
Note that both "\x{...}" and "\N{...}" are compile-time string
constants: you cannot use variables in them. if you want similar
run-time functionality, use "chr()" and "charnames::vianame()".
If you want to force the result to Unicode characters, use the special
"U0" prefix. It consumes no arguments but causes the following bytes
to be interpreted as the UTF-8 encoding of Unicode characters:
my $chars = pack("U0W*", 0x80, 0x42);
Likewise, you can stop such UTF-8 interpretation by using the special
"C0" prefix.
Handling Unicode
Handling Unicode is for the most part transparent: just use the strings
as usual. Functions like "index()", "length()", and "substr()" will
work on the Unicode characters; regular expressions will work on the
Unicode characters (see perlunicode and perlretut).
Note that Perl considers grapheme clusters to be separate characters,
so for example
use charnames ':full';
print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n";
will print 2, not 1. The only exception is that regular expressions
have "\X" for matching an extended grapheme cluster.
Life is not quite so transparent, however, when working with legacy
encodings, I/O, and certain special cases:
Legacy Encodings
When you combine legacy data and Unicode the legacy data needs to be
upgraded to Unicode. Normally ISO 8859-1 (or EBCDIC, if applicable) is
assumed.
The "Encode" module knows about many encodings and has interfaces for
doing conversions between those encodings:
use Encode 'decode';
$data = decode("iso-8859-3", $data); # convert from legacy to utf-8
Unicode I/O
Normally, writing out Unicode data
print FH $some_string_with_unicode, "\n";
produces raw bytes that Perl happens to use to internally encode the
Unicode string. Perl's internal encoding depends on the system as well
as what characters happen to be in the string at the time. If any of
the characters are at code points 0x100 or above, you will get a
warning. To ensure that the output is explicitly rendered in the
encoding you desireO-and to avoid the warningO-open the stream with the
desired encoding. Some examples:
open FH, ">:utf8", "file";
open FH, ">:encoding(ucs2)", "file";
open FH, ">:encoding(UTF-8)", "file";
open FH, ">:encoding(shift_jis)", "file";
and on already open streams, use "binmode()":
binmode(STDOUT, ":utf8");
binmode(STDOUT, ":encoding(ucs2)");
binmode(STDOUT, ":encoding(UTF-8)");
binmode(STDOUT, ":encoding(shift_jis)");
The matching of encoding names is loose: case does not matter, and many
encodings have several aliases. Note that the ":utf8" layer must
always be specified exactly like that; it is not subject to the loose
matching of encoding names. Also note that ":utf8" is unsafe for input,
because it accepts the data without validating that it is indeed valid
UTF8.
See PerlIO for the ":utf8" layer, PerlIO::encoding and Encode::PerlIO
for the ":encoding()" layer, and Encode::Supported for many encodings
supported by the "Encode" module.
Reading in a file that you know happens to be encoded in one of the
Unicode or legacy encodings does not magically turn the data into
Unicode in Perl's eyes. To do that, specify the appropriate layer when
opening files
open(my $fh,'<:encoding(utf8)', 'anything');
my $line_of_unicode = <$fh>;
open(my $fh,'<:encoding(Big5)', 'anything');
my $line_of_unicode = <$fh>;
The I/O layers can also be specified more flexibly with the "open"
pragma. See open, or look at the following example.
use open ':encoding(utf8)'; # input/output default encoding will be UTF-8
open X, ">file";
print X chr(0x100), "\n";
close X;
open Y, "<file";
printf "%#x\n", ord(<Y>); # this should print 0x100
close Y;
With the "open" pragma you can use the ":locale" layer
BEGIN { $ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R' }
# the :locale will probe the locale environment variables like LC_ALL
use open OUT => ':locale'; # russki parusski
open(O, ">koi8");
print O chr(0x430); # Unicode CYRILLIC SMALL LETTER A = KOI8-R 0xc1
close O;
open(I, "<koi8");
printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1
close I;
These methods install a transparent filter on the I/O stream that
converts data from the specified encoding when it is read in from the
stream. The result is always Unicode.
The open pragma affects all the "open()" calls after the pragma by
setting default layers. If you want to affect only certain streams,
use explicit layers directly in the "open()" call.
You can switch encodings on an already opened stream by using
"binmode()"; see "binmode" in perlfunc.
The ":locale" does not currently (as of Perl 5.8.0) work with "open()"
and "binmode()", only with the "open" pragma. The ":utf8" and
":encoding(...)" methods do work with all of "open()", "binmode()", and
the "open" pragma.
Similarly, you may use these I/O layers on output streams to
automatically convert Unicode to the specified encoding when it is
written to the stream. For example, the following snippet copies the
contents of the file "text.jis" (encoded as ISO-2022-JP, aka JIS) to
the file "text.utf8", encoded as UTF-8:
open(my $nihongo, '<:encoding(iso-2022-jp)', 'text.jis');
open(my $unicode, '>:utf8', 'text.utf8');
while (<$nihongo>) { print $unicode $_ }
The naming of encodings, both by the "open()" and by the "open" pragma
allows for flexible names: "koi8-r" and "KOI8R" will both be
understood.
Common encodings recognized by ISO, MIME, IANA, and various other
standardisation organisations are recognised; for a more detailed list
see Encode::Supported.
"read()" reads characters and returns the number of characters.
"seek()" and "tell()" operate on byte counts, as do "sysread()" and
"sysseek()".
Notice that because of the default behaviour of not doing any
conversion upon input if there is no default layer, it is easy to
mistakenly write code that keeps on expanding a file by repeatedly
encoding the data:
# BAD CODE WARNING
open F, "file";
local $/; ## read in the whole file of 8-bit characters
$t = <F>;
close F;
open F, ">:encoding(utf8)", "file";
print F $t; ## convert to UTF-8 on output
close F;
If you run this code twice, the contents of the file will be twice
UTF-8 encoded. A "use open ':encoding(utf8)'" would have avoided the
bug, or explicitly opening also the file for input as UTF-8.
NOTE: the ":utf8" and ":encoding" features work only if your Perl has
been built with the new PerlIO feature (which is the default on most
systems).
Displaying Unicode As Text
Sometimes you might want to display Perl scalars containing Unicode as
simple ASCII (or EBCDIC) text. The following subroutine converts its
argument so that Unicode characters with code points greater than 255
are displayed as "\x{...}", control characters (like "\n") are
displayed as "\x..", and the rest of the characters as themselves:
sub nice_string {
join("",
map { $_ > 255 ? # if wide character...
sprintf("\\x{%04X}", $_) : # \x{...}
chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
sprintf("\\x%02X", $_) : # \x..
quotemeta(chr($_)) # else quoted or as themselves
} unpack("W*", $_[0])); # unpack Unicode characters
}
For example,
nice_string("foo\x{100}bar\n")
returns the string
'foo\x{0100}bar\x0A'
which is ready to be printed.
Special Cases
o Bit Complement Operator ~ And vec()
The bit complement operator "~" may produce surprising results if
used on strings containing characters with ordinal values above
255. In such a case, the results are consistent with the internal
encoding of the characters, but not with much else. So don't do
that. Similarly for "vec()": you will be operating on the
internally-encoded bit patterns of the Unicode characters, not on
the code point values, which is very probably not what you want.
o Peeking At Perl's Internal Encoding
Normal users of Perl should never care how Perl encodes any
particular Unicode string (because the normal ways to get at the
contents of a string with UnicodeO-via input and outputO-should
always be via explicitly-defined I/O layers). But if you must,
there are two ways of looking behind the scenes.
One way of peeking inside the internal encoding of Unicode
characters is to use "unpack("C*", ..." to get the bytes of
whatever the string encoding happens to be, or "unpack("U0..",
...)" to get the bytes of the UTF-8 encoding:
# this prints c4 80 for the UTF-8 bytes 0xc4 0x80
print join(" ", unpack("U0(H2)*", pack("U", 0x100))), "\n";
Yet another way would be to use the Devel::Peek module:
perl -MDevel::Peek -e 'Dump(chr(0x100))'
That shows the "UTF8" flag in FLAGS and both the UTF-8 bytes and
Unicode characters in "PV". See also later in this document the
discussion about the "utf8::is_utf8()" function.
Advanced Topics
o String Equivalence
The question of string equivalence turns somewhat complicated in
Unicode: what do you mean by "equal"?
(Is "LATIN CAPITAL LETTER A WITH ACUTE" equal to "LATIN CAPITAL
LETTER A"?)
The short answer is that by default Perl compares equivalence
("eq", "ne") based only on code points of the characters. In the
above case, the answer is no (because 0x00C1 != 0x0041). But
sometimes, any CAPITAL LETTER As should be considered equal, or
even As of any case.
The long answer is that you need to consider character
normalization and casing issues: see Unicode::Normalize, Unicode
Technical Report #15, Unicode Normalization Forms
<http://www.unicode.org/unicode/reports/tr15> and sections on case
mapping in the Unicode Standard <http://www.unicode.org>.
As of Perl 5.8.0, the "Full" case-folding of Case
Mappings/SpecialCasing is implemented, but bugs remain in "qr//i"
with them.
o String Collation
People like to see their strings nicely sortedO-or as Unicode
parlance goes, collated. But again, what do you mean by collate?
(Does "LATIN CAPITAL LETTER A WITH ACUTE" come before or after
"LATIN CAPITAL LETTER A WITH GRAVE"?)
The short answer is that by default, Perl compares strings ("lt",
"le", "cmp", "ge", "gt") based only on the code points of the
characters. In the above case, the answer is "after", since 0x00C1
> 0x00C0.
The long answer is that "it depends", and a good answer cannot be
given without knowing (at the very least) the language context.
See Unicode::Collate, and Unicode Collation Algorithm
<http://www.unicode.org/unicode/reports/tr10/>
Miscellaneous
o Character Ranges and Classes
Character ranges in regular expression character classes
("/[a-z]/") and in the "tr///" (also known as "y///") operator are
not magically Unicode-aware. What this means is that "[A-Za-z]"
will not magically start to mean "all alphabetic letters"; not that
it does mean that even for 8-bit characters, you should be using
"/[[:alpha:]]/" in that case.
For specifying character classes like that in regular expressions,
you can use the various Unicode propertiesO-"\pL", or perhaps
"\p{Alphabetic}", in this particular case. You can use Unicode
code points as the end points of character ranges, but there is no
magic associated with specifying a certain range. For further
informationO-there are dozens of Unicode character classesO-see
perlunicode.
o String-To-Number Conversions
Unicode does define several other decimalO-and numericO-characters
besides the familiar 0 to 9, such as the Arabic and Indic digits.
Perl does not support string-to-number conversion for digits other
than ASCII 0 to 9 (and ASCII a to f for hexadecimal).
Questions With Answers
o Will My Old Scripts Break?
Very probably not. Unless you are generating Unicode characters
somehow, old behaviour should be preserved. About the only
behaviour that has changed and which could start generating Unicode
is the old behaviour of "chr()" where supplying an argument more
than 255 produced a character modulo 255. "chr(300)", for example,
was equal to "chr(45)" or "-" (in ASCII), now it is LATIN CAPITAL
LETTER I WITH BREVE.
o How Do I Make My Scripts Work With Unicode?
Very little work should be needed since nothing changes until you
generate Unicode data. The most important thing is getting input
as Unicode; for that, see the earlier I/O discussion.
o How Do I Know Whether My String Is In Unicode?
You shouldn't have to care. But you may, because currently the
semantics of the characters whose ordinals are in the range 128 to
255 is different depending on whether the string they are contained
within is in Unicode or not. (See "When Unicode Does Not Happen"
in perlunicode.)
To determine if a string is in Unicode, use:
print utf8::is_utf8($string) ? 1 : 0, "\n";
But note that this doesn't mean that any of the characters in the
string are necessary UTF-8 encoded, or that any of the characters
have code points greater than 0xFF (255) or even 0x80 (128), or
that the string has any characters at all. All the "is_utf8()"
does is to return the value of the internal "utf8ness" flag
attached to the $string. If the flag is off, the bytes in the
scalar are interpreted as a single byte encoding. If the flag is
on, the bytes in the scalar are interpreted as the (multi-byte,
variable-length) UTF-8 encoded code points of the characters.
Bytes added to a UTF-8 encoded string are automatically upgraded to
UTF-8. If mixed non-UTF-8 and UTF-8 scalars are merged
(double-quoted interpolation, explicit concatenation, and
printf/sprintf parameter substitution), the result will be UTF-8
encoded as if copies of the byte strings were upgraded to UTF-8:
for example,
$a = "ab\x80c";
$b = "\x{100}";
print "$a = $b\n";
the output string will be UTF-8-encoded "ab\x80c = \x{100}\n", but
$a will stay byte-encoded.
Sometimes you might really need to know the byte length of a string
instead of the character length. For that use either the
"Encode::encode_utf8()" function or the "bytes" pragma and the
"length()" function:
my $unicode = chr(0x100);
print length($unicode), "\n"; # will print 1
require Encode;
print length(Encode::encode_utf8($unicode)), "\n"; # will print 2
use bytes;
print length($unicode), "\n"; # will also print 2
# (the 0xC4 0x80 of the UTF-8)
o How Do I Detect Data That's Not Valid In a Particular Encoding?
Use the "Encode" package to try converting it. For example,
use Encode 'decode_utf8';
if (eval { decode_utf8($string, Encode::FB_CROAK); 1 }) {
# $string is valid utf8
} else {
# $string is not valid utf8
}
Or use "unpack" to try decoding it:
use warnings;
@chars = unpack("C0U*", $string_of_bytes_that_I_think_is_utf8);
If invalid, a "Malformed UTF-8 character" warning is produced. The
"C0" means "process the string character per character". Without
that, the "unpack("U*", ...)" would work in "U0" mode (the default
if the format string starts with "U") and it would return the bytes
making up the UTF-8 encoding of the target string, something that
will always work.
o How Do I Convert Binary Data Into a Particular Encoding, Or Vice
Versa?
This probably isn't as useful as you might think. Normally, you
shouldn't need to.
In one sense, what you are asking doesn't make much sense:
encodings are for characters, and binary data are not "characters",
so converting "data" into some encoding isn't meaningful unless you
know in what character set and encoding the binary data is in, in
which case it's not just binary data, now is it?
If you have a raw sequence of bytes that you know should be
interpreted via a particular encoding, you can use "Encode":
use Encode 'from_to';
from_to($data, "iso-8859-1", "utf-8"); # from latin-1 to utf-8
The call to "from_to()" changes the bytes in $data, but nothing
material about the nature of the string has changed as far as Perl
is concerned. Both before and after the call, the string $data
contains just a bunch of 8-bit bytes. As far as Perl is concerned,
the encoding of the string remains as "system-native 8-bit bytes".
You might relate this to a fictional 'Translate' module:
use Translate;
my $phrase = "Yes";
Translate::from_to($phrase, 'english', 'deutsch');
## phrase now contains "Ja"
The contents of the string changes, but not the nature of the
string. Perl doesn't know any more after the call than before that
the contents of the string indicates the affirmative.
Back to converting data. If you have (or want) data in your
system's native 8-bit encoding (e.g. Latin-1, EBCDIC, etc.), you
can use pack/unpack to convert to/from Unicode.
$native_string = pack("W*", unpack("U*", $Unicode_string));
$Unicode_string = pack("U*", unpack("W*", $native_string));
If you have a sequence of bytes you know is valid UTF-8, but Perl
doesn't know it yet, you can make Perl a believer, too:
use Encode 'decode_utf8';
$Unicode = decode_utf8($bytes);
or:
$Unicode = pack("U0a*", $bytes);
You can find the bytes that make up a UTF-8 sequence with
@bytes = unpack("C*", $Unicode_string)
and you can create well-formed Unicode with
$Unicode_string = pack("U*", 0xff, ...)
o How Do I Display Unicode? How Do I Input Unicode?
See <http://www.alanwood.net/unicode/> and
<http://www.cl.cam.ac.uk/~mgk25/unicode.html>
o How Does Unicode Work With Traditional Locales?
In Perl, not very well. Avoid using locales through the "locale"
pragma. Use only one or the other. But see perlrun for the
description of the "-C" switch and its environment counterpart,
$ENV{PERL_UNICODE} to see how to enable various Unicode features,
for example by using locale settings.
Hexadecimal Notation
The Unicode standard prefers using hexadecimal notation because that
more clearly shows the division of Unicode into blocks of 256
characters. Hexadecimal is also simply shorter than decimal. You can
use decimal notation, too, but learning to use hexadecimal just makes
life easier with the Unicode standard. The "U+HHHH" notation uses
hexadecimal, for example.
The "0x" prefix means a hexadecimal number, the digits are 0-9 and a-f
(or A-F, case doesn't matter). Each hexadecimal digit represents four
bits, or half a byte. "print 0x..., "\n"" will show a hexadecimal
number in decimal, and "printf "%x\n", $decimal" will show a decimal
number in hexadecimal. If you have just the "hex digits" of a
hexadecimal number, you can use the "hex()" function.
print 0x0009, "\n"; # 9
print 0x000a, "\n"; # 10
print 0x000f, "\n"; # 15
print 0x0010, "\n"; # 16
print 0x0011, "\n"; # 17
print 0x0100, "\n"; # 256
print 0x0041, "\n"; # 65
printf "%x\n", 65; # 41
printf "%#x\n", 65; # 0x41
print hex("41"), "\n"; # 65
Further Resources
o Unicode Consortium
<http://www.unicode.org/>
o Unicode FAQ
<http://www.unicode.org/unicode/faq/>
o Unicode Glossary
<http://www.unicode.org/glossary/>
o Unicode Useful Resources
<http://www.unicode.org/unicode/onlinedat/resources.html>
o Unicode and Multilingual Support in HTML, Fonts, Web Browsers and
Other Applications
<http://www.alanwood.net/unicode/>
o UTF-8 and Unicode FAQ for Unix/Linux
<http://www.cl.cam.ac.uk/~mgk25/unicode.html>
o Legacy Character Sets
<http://www.czyborra.com/> <http://www.eki.ee/letter/>
o The Unicode support files live within the Perl installation in the
directory
$Config{installprivlib}/unicore
in Perl 5.8.0 or newer, and
$Config{installprivlib}/unicode
in the Perl 5.6 series. (The renaming to lib/unicore was done to
avoid naming conflicts with lib/Unicode in case-insensitive
filesystems.) The main Unicode data file is UnicodeData.txt (or
Unicode.301 in Perl 5.6.1.) You can find the
$Config{installprivlib} by
perl "-V:installprivlib"
You can explore various information from the Unicode data files
using the "Unicode::UCD" module.
UNICODE IN OLDER PERLS
If you cannot upgrade your Perl to 5.8.0 or later, you can still do
some Unicode processing by using the modules "Unicode::String",
"Unicode::Map8", and "Unicode::Map", available from CPAN. If you have
the GNU recode installed, you can also use the Perl front-end
"Convert::Recode" for character conversions.
The following are fast conversions from ISO 8859-1 (Latin-1) bytes to
UTF-8 bytes and back, the code works even with older Perl 5 versions.
# ISO 8859-1 to UTF-8
s/([\x80-\xFF])/chr(0xC0|ord($1)>>6).chr(0x80|ord($1)&0x3F)/eg;
# UTF-8 to ISO 8859-1
s/([\xC2\xC3])([\x80-\xBF])/chr(ord($1)<<6&0xC0|ord($2)&0x3F)/eg;
SEE ALSO
perlunitut, perlunicode, Encode, open, utf8, bytes, perlretut, perlrun,
Unicode::Collate, Unicode::Normalize, Unicode::UCD
ACKNOWLEDGMENTS
Thanks to the kind readers of the perl5-porters@perl.org,
perl-unicode@perl.org, linux-utf8@nl.linux.org, and unicore@unicode.org
mailing lists for their valuable feedback.
AUTHOR, COPYRIGHT, AND LICENSE
Copyright 2001-2002 Jarkko Hietaniemi <jhi@iki.fi>
This document may be distributed under the same terms as Perl itself.
perl v5.12.2 September 24, 2010
