IMAPFILTER_CONFIG(5) BSD File Formats Manual IMAPFILTER_CONFIG(5)NAMEimapfilter_config — imapfilter configuration file
SYNOPSIS
$HOME/.imapfilter/config.lua
DESCRIPTIONimapfilter(1) uses the Lua programming language as a configuration and
extension language, therefore the configuration file is a Lua script.
Although knowledge of Lua is not required to use imapfilter(1), it is
nonetheless recommended, especially if one wants to extend it.
CONVENTIONS
A brief description of the Lua values and types mentioned hereafter in
the manual page follows:
The nil is the type of the value “nil”, whose main property is to be
different from any other value; usually it represents the absence of
a useful value.
The boolean is the type of the values “true” and “false”. Both “nil”
and “false” make a condition false; any other value makes it true.
The type number represents real numbers.
The type string represents a sequence of characters and can be
defined using single quotes, double quotes or double square brackets.
The type table implements associative arrays, that is, arrays that
can be indexed not only with numbers, but with any value.
A function is a first-class value; it can be stored in variables,
passed as argument to other functions, and returned as a result.
OPTIONS
Program's options are set using an already initialised table named
“options”, in the following manner:
options.timeout = 120
options.namespace = false
options.charset = 'ISO-8859-1'
Available options are:
cache When this option is enabled, parts of messages are cached locally
in memory to avoid being downloaded more than once. The cache is
preserved for the current session only. This variable takes a
boolean as a value. Default is “true”.
certificates
When this option is enabled, the server certificate can be
accepted and stored, in order to validate the authenticity of the
server in future connections. This variable takes a boolean as a
value. Default is “true”.
charset
Indicates to the server the character set of the strings for the
searching methods. This variable takes a string as a value. By
default no character set is set, and thus plain ASCII should be
assumed by the server.
create According to the IMAP specification, when trying to write a mes‐
sage to a non-existent mailbox, the server must send a hint to
the client, whether it should create the mailbox and try again or
not. However some IMAP servers don't follow the specification and
don't send the correct response code to the client. By enabling
this option the client tries to create the mailbox, despite of
the server's response. This variable takes a boolean as a value.
Default is “false”.
close This option controls whether the currently selected mailbox is
implicitly closed at the end of each performed operation, thus
removing all messages that are marked deleted. This variable
takes a boolean as a value. Default is “false”.
crammd5
When this option is enabled and the server supports the Chal‐
lenge-Response Authentication Mechanism (specifically CRAM-MD5),
this method will be used for user authentication instead of a
plaintext password LOGIN. This variable takes a boolean as a
value. Default is “true”.
expunge
Normally, messages are marked for deletion and are actually
deleted when the mailbox is closed. When this option is enabled,
messages are expunged immediately after being marked deleted.
This variable takes a boolean as a value. Default is “true”.
info When this options is enabled, a summary of the program's actions
is printed, while processing mailboxes. This variable takes a
boolean as a value. Default is “true”.
keepalive
The time in minutes before terminating and re-issuing the IDLE
command, in order to keep alive the connection, by resetting the
inactivity timeout of the server. A standards compliant server
must have an inactivity timeout of at least 30 minutes. But it
may happen that some IMAP servers don't respect that, or some
intermediary network device has a shorter timeout. By setting
this option the above problem can be worked around. This variable
takes a number as a value. Default is “29” minutes.
limit Some servers have problems handling very long requests, but some
of the requests that need to be sent can become quite long,
because they apply an action for many messages at once. When
this option is set, the client will try to break up these
requests into smaller requests, that each operates on fewer mes‐
sages at a time. A good value for this would be “50,” This vari‐
able takes a number as a value. Default is “0”.
namespace
When enabled, the program gets the namespace of the user's per‐
sonal mailboxes, and applies automatically the prefix and hierar‐
chy delimiter to any mailboxes residing on the mail server; the
user must use the ‘/’ character as the delimiter and “” (ie.
nothing) as the prefix, regardless of the folder format of the
mail server. This must be disabled, if the user wants to manu‐
ally specify mailbox names (eg. because they are not part of the
user's personal namespace mailboxes). This variable takes
boolean as a value. Default is “true”.
recover
With this option it is possible to control the recovery function‐
ality, which restores a session (the connection to the server and
the IMAP state at the time), after some unexpected event takes
place. Currently there are two types of events that can end
abnormally a session, and finally cause the program to terminate:
network errors, and the IMAP BYE response which a server can send
anytime. When this option is set to “all” the recovery function
is triggered by both types of events, when set to “errors” only
in the case of network errors, and when set to “none” the mecha‐
nism is completely disabled. Default is “all”.
reenter
When this option is enabled and the connection is recovered after
some unexpected event while in IDLE mode (see also the recover
option), the client will re-enter IDLE mode. But when this
option is disabled, and after the connection is recovered, the
client will not re-enter IDLE mode, and instead will continue to
execute the next line in the configuration file, ie. the one
after enter_idle(). Default is “true”.
starttls
When this option is enabled and the server supports the IMAP
STARTTLS extension, a TLS connection will be negotiated with the
mail server in the beginning of the session. This variable takes
a boolean as value. Default is “true”.
subscribe
By enabling this option new mailboxes that were automatically
created, get also subscribed; they are set active in order for
IMAP clients to recognize them. This variable takes a boolean as
a value. Default is “false”.
timeout
The time in seconds for the program to wait for a mail server's
response. If set to 0, the client will block indefinitely. This
variable takes a number as a value. Default is “60” seconds.
wakeonany
By enabling this option the IDLE command will return on any event
that is received from the server, and not just on the “RECENT”
and “EXISTS” events, that normally indicate the arrival of a new
message. Examples of other events are “FETCH”, which indicates
that the details of a message (eg. its flags) have been modified,
or “EXPUNGE”, which indicates that a message has been deleted.
This variable takes a boolean as a value. Default is “false”.
ACCOUNTS
Accounts are initialized using the IMAP() function, and the details of
the connection are defined using an account table:
myaccount = IMAP {
server = 'imap.mail.server',
username = 'me',
password = 'secret',
ssl = 'ssl23'
}
An account table must have the following elements:
server The hostname of the IMAP server to connect to. It takes a string
as a value.
username
User's name. It takes a string as a value.
An account table can also have the following optional elements:
password
User's secret keyword. If a password wasn't supplied the user
will be asked to enter one interactively the first time it will
be needed. It takes a string as a value.
port The port to connect to. It takes a number as a value. Default
is “143” for imap and “993” for imaps.
ssl Forces an imaps connection and specifies the SSL/TLS proto‐
col/version to be used. It takes a string as a value, specifi‐
cally one of: “ssl3”, “ssl23”, “tls1”, “tls1.1”, “tls1.2”.
LISTING
The following methods can be used on an account to list mailboxes in a
folder of an account:
list_all(folder)
Lists all the available mailboxes in the folder (string), and
returns a table that contains strings, the available mailboxes,
and a table that contains strings, the available folders.
list_subscribed(folder)
Lists all the subscribed mailboxes in the folder (string), and
returns a table that contains strings, the subscribed mailboxes,
and a table that contains strings, the subscribed folders.
The following methods can be used on an account to list mailboxes, using
wildcards, in a folder of an account. The ‘*’ wildcard, matches any
character and the ‘%’ matches any character except the folder delimiter,
ie. non-recursively:
list_all(folder, mailbox)
Lists all the available mailboxes in the folder (string) with the
name mailbox (string), and returns a table that contains strings,
the available mailboxes, and a table that contains strings, the
available folders. Wildcards may only be used in the mailbox
argument.
list_subscribed(folder, mailbox)
Lists all the subscribed mailboxes in the folder (string) with
the name mailbox (string), and returns a table that contains
strings, the subscribed mailboxes, and a table that contains
strings, the subscribed folders. Wildcards may only be used in
the mailbox argument.
Examples:
mailboxes, folders = myaccount:list_subscribed('myfolder')
mailboxes, folders = myaccount:list_all('myfolder/mysubfolder', '*')
MANIPULATING
The following methods can be used to manipulate mailboxes in an account:
create_mailbox(name)
Creates the name (string) mailbox.
delete_mailbox(name)
Deletes the name (string) mailbox.
rename_mailbox(oldname, newname)
Renames the oldname (string) mailbox to newname (string).
subscribe_mailbox(name)
Subscribes the name (string) mailbox.
unsubscribe_mailbox(name)
Unsubscribes the name (string) mailbox.
Examples:
myaccount:create_mailbox('mymailbox')
myaccount:subscribe_mailbox('mymailbox')
myaccount:unsubscribe_mailbox('myfolder/mymailbox')
myaccount:delete_mailbox('myfolder/mymailbox')
MAILBOXES
After an IMAP account has been initialized, mailboxes residing in that
account can be accessed simply as elements of the account table:
myaccount.mymailbox
If mailbox names don't only include letters, digits and underscores, or
begin with a digit, an alternative form must be used:
myaccount['mymailbox']
A mailbox inside a folder can be only accessed by using the alternative
form:
myaccount['myfolder/mymailbox']
The methods that are available for an account (eg. list_all(),
create_mailbox(), etc.) , are considered keywords and must not be used as
mailbox names, and the same also applies for any string starting with an
underscore, as they are considered reserved.
CHECKING
The following methods can be used to check the status of a mailbox:
check_status()
The check_status() method gets the current status of a mailbox,
and returns four values of number type: the total number of mes‐
sages, the number of recent messages, the number of unseen mes‐
sages in the mailbox, and the next UID to be assigned to a new
message in the mailbox.
enter_idle()
The enter_idle() method implements the IMAP IDLE (RFC 2177)
extension. By using this extension it's not necessary to poll
the server for changes to the selected mailbox (ie. using the
check_status() method), but instead the server sends an update
when there is a change in the mailbox (eg. in case of new mail).
When the enter_idle() method has been called no more commands in
the configuration file are executed until an update is received,
at which point the enter_idle() method returns. For the
enter_idle() to work, the IDLE extension has to be supported by
the IMAP server.
The enter_idle() method returns a value of type boolean: “true”
if the IDLE extension is supported and there was a update in the
mailbox, and “false” if the IDLE extension is not supported, in
which case the method returns immediately. When the aforemen‐
tioned return value was “true”, an additional second value of
type string is also returned, indicating the event received from
the server, which is useful when the wakeonany option has been
enabled.
Examples:
exist, unread, unseen, uidnext = myaccount.mymailbox:check_status()
update = myaccount.mymailbox:enter_idle()
update, event = myaccount.mymailbox:enter_idle()
SEARCHING
The searching methods in this subsection can be applied to any mailbox.
They return a special form of table, that contains the messages that
match the searching method. This table can be combined with other tables
using logic theory. There are three available operations, that implement
logical “or”, logical “and” and logical “not”.
The logical “or” is implemented using the ‘+’ operator:
results = myaccount.mymailbox:is_unseen() +
myaccount.mymailbox:is_larger(100000)
The logical “and” is implemented using the ‘*’ operator:
results = myaccount.mymailbox:is_unseen() *
myaccount.mymailbox:is_larger(100000)
The logical “not” is implemented using the ‘-’ operator:
results = myaccount.mymailbox:is_unseen()-
myaccount.mymailbox:is_larger(100000)
The three logical operators can be combined in the same expression. The
logical “and” has higher precedence than the logical “or” and the logical
“not”, with the latter two having the same precedence, and parentheses
may be used to change this behaviour:
results = myaccount.mymailbox:is_unseen() +
myaccount.mymailbox:is_larger(100000) *
myaccount.mymailbox:contain_subject('test')
results = ( myaccount.mymailbox:is_unseen() +
myaccount.mymailbox:is_larger(100000) ) *
myaccount.mymailbox:contain_subject('test')
The returned tables of the searching methods can also be stored in vari‐
ables and then further processed:
unseen = myaccount.myaccount:is_unseen()
larger = myaccount.mymailbox:is_larger(100000)
subject = myaccount.mymailbox:contain_subject('test')
results = unseen + larger * subject
A composite filter that includes one or more simple rules can be defined:
myfilter = function ()
return myaccount.mymailbox:is_unseen() +
myaccount.mymailbox:is_larger(100000) *
myaccount.mymailbox:contain_subject('test')
end
results = myfilter()
Composite filters can may be more dynamic by adding arguments:
myfilter = function (mailbox, size, subject)
return mailbox:is_unseen() +
mailbox:is_larger(size) *
mailbox:contain_subject(subject)
end
results = myfilter(myaccount.mailbox, 100000, 'test')
It is also possible to combine the searching methods in different mail‐
boxes, either at the same or different accounts, for example when the
same actions will be executed on messages residing in different mailboxes
or accounts.
results = myaccount.mymailbox:is_unseen() +
myaccount.myothermailbox:is_larger(100000) +
myotheraccount.myothermailbox:contain_subject('test')
The following method can be used to get all messages in a mailbox:
select_all()
All messages.
The following methods can be used to search for messages that are in a
specific state:
is_answered()
Messages that have been answered.
is_deleted()
Messages that are marked for later removal.
is_draft()
Messages that have not completed composition.
is_flagged()
Messages that are flagged for urgent/special attention.
is_new()
Messages that are recently arrived (this session is the first to
have been notified about these messages) and have not been read.
is_old()
Messages that are not recently arrived (this session is not the
first to have been notified about these messages) and have not
been read.
is_recent()
Messages that are recently arrived (this session is the first to
have been notified about these messages).
is_seen()
Messages that have been read.
is_unanswered()
Messages that have not been answered.
is_undeleted()
Messages that are not marked for later removal.
is_undraft()
Messages that have completed composition.
is_unflagged()
Messages that are not flagged for urgent/special attention.
is_unseen()
Messages that have not been read.
The following method can be used to search for messages that have a spe‐
cific keyword flag set:
has_keyword(flag)
Messages with the specified keyword flag (string) set.
has_unkeyword(flag)
Messages without the specified keyword flag (string) set.
The following methods can be used to search for messages based on their
size:
is_larger(size)
Messages that are larger than the size (number) in octets
(bytes).
is_smaller(size)
Messages that are smaller than the size (number) in octets
(bytes).
The following methods can be used to search for messages based on their
age:
is_newer(age)
Messages that are newer than the age (number) in days.
is_older(age)
Messages that are older than the age (number) in days.
The following methods can be used to search for messages based on their
arrival or sent date, in the “day-month-year” form, where day is the day
of the month as a decimal number (01-31), month is the abbreviated month
( “Jan”, “Feb”, “Mar”, “Apr”, “May”, “Jun”, “Jul”, “Aug”, “Sep”, “Oct”,
“Nov”, “Dec”) and year is the year as decimal number including the cen‐
tury (eg. 2007):
arrived_before(date)
messages that have arrived earlier than the date (string), where
date is in the “day-month-year” form.
arrived_on(date)
Messages that have arrived within the date (string), where date
is in the “day-month-year” form.
arrived_since(date)
Messages that have arrived within or later than the date
(string), where date is in the “day-month-year” form.
sent_before(date)
Messages that have been sent earlier than the date (string),
where date is in the “day-month-year” form.
sent_on(date)
Messages that have been sent within the date (string), where date
is in the “day-month-year” form.
sent_since(date)
Messages that have been sent within or later than the date
(string), where date is in the “day-month-year” form.
The following methods can be used to do case-insensitive searching, for
messages that contain a specific word or phrase:
contain_bcc(string)
Messages that contain the string (string) in the “Bcc” header
field.
contain_cc(string)
Messages that contain the string (string) in the “Cc” header
field.
contain_from(string)
Messages that contain the string (string) in the “From” header
field.
contain_subject(string)
Messages that contain the string (string) in the “Subject” header
field.
contain_to(string)
Messages that contain the string (string) in the “To” header
field.
contain_field(field, string)
Messages that contain the string (string) in the field (string)
header field.
contain_body(string)
Messages that contain the string (string) in the message body.
contain_message(string)
Messages that contain the string (string) in the message.
The following methods can be used to do case-sensitive searching, for
messages that match a specific regular expression pattern. The matching
mechanism that is used to support this is based on the Perl-compatible
regular expressions (PCRE), and more information about the patterns and
modifiers that can be used, is available in the relevant documentation.
This way of searching is not supported by the IMAP protocol, and this
means that what actually happens under the hood, is that the relevant
parts of all the messages are downloaded and matched locally. It is
therefore recommended to use these methods with meta-searching (see fol‐
lowing section), in order to narrow down the set of messages that should
be searched, and thus minimize what will be downloaded.
Note that due to Lua using backslash ‘\’ as an escape character for its
strings, one has to double backslashes in order to insert a single back‐
slash inside a regular expression pattern:
match_bcc(pattern)
Messages that match the regular expression pattern (string) in
the “Bcc” header field.
match_cc(pattern)
Messages that match the regular expression pattern (string) in
the “Cc” header field.
match_from(pattern)
Messages that match the regular expression pattern (string) in
the “From” header field.
match_subject(pattern)
Messages that match the regular expression pattern (string) in
the “Subject” header field.
match_to(pattern)
Messages that match the regular expression pattern (string) in
the “To” header field.
match_field(field, pattern)
Messages that match the regular expression pattern (string) in
the field (string) header field.
match_header(pattern)
Messages that match the regular expression pattern (string) in
the message header.
match_body(pattern)
Messages that match the regular expression pattern (string) in
the message body.
match_message(pattern)
Messages that match the regular expression pattern (string) in
the message.
The following method can be used to search for messages using user
queries based on the IMAP specification (RFC 3501 Section 6.4.4):
send_query(criteria)
Searches messages by sending an IMAP search query as described in
the search criteria (string).
Examples:
results = myaccount.mymailbox:select_all()
results = myaccount.mymailbox:is_new()
results = myaccount.mymailbox:is_recent()
results = myaccount.mymailbox:is_larger(100000)
results = myaccount.mymailbox:is_older(10)
results = myaccount.mymailbox:has_keyword('MyFlag')
results = myaccount.mymailbox:arrived_before('01-Jan-2007')
results = myaccount.mymailbox:sent_since('01-Jan-2007')
results = myaccount.mymailbox:contain_subject('test')
results = myaccount.mymailbox:contain_field('Sender', 'user@host')
results = myaccount.mymailbox:contain_body('hello world')
results = myaccount.mymailbox:match_from('.*(user1|user2)@host')
results = myaccount.mymailbox:send_query('ALL')
results = myaccount['mymailbox']:is_new()
results = myaccount['myfolder/mymailbox']:is_recent()RESULTS
After one of more searching methods have been applied to one or more
mailboxes, the result contains all the necessary information, such as
which messages matched in which mailboxes. Using this result these mes‐
sages can be either searched further or processed in various way.
META-SEARCHING
The results of the searching methods can be searched further on in the
same way as searching is done in mailboxes. The difference is that
instead of doing the search in the whole mailbox, ie. in all the mes‐
sages, it is instead done only to those messages that were returned in a
previous search.
Examples:
results:match_message('^[Hh]ello world!?$')
myaccount.mymailbox:is_new():match_body('^[Ww]orld, hello!?$')
PROCESSING
The processing methods are applied to the results that searching
returned.
The following method can be used to delete messages in a mailbox:
delete_messages()
Deletes the messages that matched.
The following methods can be used to copy and move messages in a mailbox
at the same or different accounts. If the destination mailbox is in a
different account than the source mailbox, then the messages are down‐
loaded and then uploaded to the destination:
copy_messages(destination)
Copies the messages to the destination, which is a mailbox at an
account.
move_messages(destination)
Moves the messages to the destination, which is a mailbox at an
account.
The following methods can be used to mark messages in a mailbox:
mark_answered()
Marks the messages as answered.
mark_deleted()
Marks the messages for later removal.
mark_draft()
Marks the messages as draft.
mark_flagged()
Marks the messages for urgent/special attention.
mark_seen()
Marks the messages as read.
unmark_answered()
Unmarks the messages that have been marked as answered.
unmark_deleted()
Unmarks the messages that have been marked for later removal.
unmark_draft()
Unmarks the messages that have been marked as draft.
unmark_flagged()
Unmarks the messages that have been marked for urgent/special
attention.
unmark_seen()
Unmarks the messages that have been marked as read.
The following methods can be used to flag messages in a mailbox. The
standard system flags are “\Answered”, “\Deleted”, “\Draft”, “\Flagged”,
“\Seen”, while if the server supports it, new user keywords may be
defined:
add_flags(flags)
Adds the flags (table that contains strings) to the messages.
remove_flags(flags)
Removes the flags (table that contains strings) from the mes‐
sages.
replace_flags(flags)
Replaces the flags (table that contains strings) of the messages.
Examples:
results:delete_messages()
results:copy_messages(myaccount.myothermailbox)
results:move_messages(myotheraccount.mymailbox)
results:mark_seen()results:unmark_flagged()
results:add_flags({ 'MyFlag', '\\Seen' })
results:remove_flags({ '\\Seen' })
results:move_messages(myotheraccount['myfolder/mymailbox'])
MESSAGES
The messages that are residing in any mailbox can be also accessed, as a
whole or in parts. Messages can be accessed using their unique identi‐
fier (UID):
myaccount.mymailbox[22]
The UIDs of messages the user is interested in, are gained from the
results of searching:
results = account.INBOX:is_unseen()
for _, message in ipairs(results) do
mailbox, uid = table.unpack(message)
header = mailbox[uid]:fetch_header()
end
FETCHING
The following methods can be used to fetch parts of messages. The meth‐
ods return a string. The downloaded message parts are cached locally, so
they can be reused inside the same program session:
fetch_message()
Fetches the header and body of the message.
fetch_header()
Fetches the header of the message.
fetch_body()
Fetches the body of the messages.
fetch_field(field)
Fetches the specified header field (string) of the message.
fetch_part(part)
Fetches the specified part (string) of the message.
The following methods can be used to fetch details about the state of a
message:
fetch_flags()
Fetches the flags of the message. Returns a table of strings.
fetch_date()
Fetches the internal date of the message. Returns a string.
fetch_size()
Fetches the size of the message. Returns a number.
fetch_structure()
Fetches the body structure of the message. Returns a table that
has as keys the parts of the message, and as values a table that
has one mandatory element, the type (string) of the part, and two
optional elements, the size (number) and name (string) of the
part.
APPENDING
The following methods can be used to append a message to a mailbox:
append_message(message)
Appends the message (string) to the mailbox.
append_message(message, flags, date)
Appends the message (string) to the mailbox, setting the speci‐
fied flags (table of strings), as returned by fetch_flags(), and
date (string), as returned by fetch_date().
Examples:
myaccount.mymailbox[2]:fetch_message()
myaccount.mymailbox[3]:fetch_field('subject')
myaccount.mymailbox[5]:fetch_part('1.1')
myaccount['mymailbox'][7]:fetch_message()
myaccount['myfolder/mymailbox'][11]:fetch_message()myaccount.mymailbox:append_message(message)FUNCTIONS
The following auxiliary functions are also available for convenience:
form_date(days)
Forms a date in “day-month-year” format that the system had
before the number of days (number), and returns it as a string.
get_password(prompt)
Displays the specified prompt (string), and reads a password,
while character echoing is turned off. Returns that password as
a string.
become_daemon(interval, commands)
Detaches the program from the controlling terminal and runs it in
the background as system daemon. The program will then repeatedly
poll at the specified interval (number) in seconds. Each time the
program wakes up, the commands (function) are executed.
become_daemon(interval, commands, nochdir, noclose)
Detaches the program from the controlling terminal and runs it in
the background as system daemon. The program will then repeatedly
poll at the specified interval (number) in seconds. Each time the
program wakes up, the commands (function) are executed.
If nochdir (boolean) is “true”, the current working directory is
not changed to the root directory (/). If noclose (boolean) is
“true”, the standard input, standard output and standard error
are not redirected to /dev/null.
pipe_to(command, data)
Executes the system's command (string) and sends the data
(string) to the standard input channel of the subprocess. Returns
a number, the exit status of the child process.
pipe_from(command)
Executes the system's command (string) and retrieves the data
from the standard output channel of the subprocess. Returns a
number, the exit status of the child process, and a string, the
output of the child process.
regex_search(pattern, string)
Implements Perl-compatible regular expressions (PCRE). The
pattern (string) is a PCRE pattern. The string (string) is the
subject string in which the pattern is matched against. Returns
at least a boolean, that denotes if the match was successful, and
any captures which are of string type. Note that due to Lua
using backslash ‘\’ as an escape character for its strings, one
has to double backslashes in order to insert a single backslash
inside a regular expression pattern.
Examples:
date = form_date(14)
password = get_password('Enter password: ')
become_daemon(600, myfunction)
status = pipe_to('mycommandline', 'mydata')
status, data = pipe_from('mycommandline')
success, capture = regex_search('^(?i)pcre: (\\w)$', 'mystring')
EXAMPLES
See samples/config.lua and samples/extend.lua in the source code distri‐
bution.
ENVIRONMENT
HOME User's home directory.
SEE ALSOimapfilter(1), http://www.lua.org/docs.html,
http://pcre.org/original/doc/html/
BSD Sep 30, 2015 BSD