ASN1_TIME_adj man page on DragonFly

Printed from http://www.polarhome.com/service/man/?qf=ASN1_TIME_adj&af=0&tf=2&of=DragonFly

ASN1_TIME_set(3)		    OpenSSL		      ASN1_TIME_set(3)

NAME
       ASN1_TIME_set, ASN1_TIME_adj, ASN1_TIME_check, ASN1_TIME_set_string,
       ASN1_TIME_print, ASN1_TIME_diff - ASN.1 Time functions.

SYNOPSIS
	ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s, time_t t);
	ASN1_TIME *ASN1_TIME_adj(ASN1_TIME *s, time_t t,
				 int offset_day, long offset_sec);
	int ASN1_TIME_set_string(ASN1_TIME *s, const char *str);
	int ASN1_TIME_check(const ASN1_TIME *t);
	int ASN1_TIME_print(BIO *b, const ASN1_TIME *s);

	int ASN1_TIME_diff(int *pday, int *psec,
			   const ASN1_TIME *from, const ASN1_TIME *to);

DESCRIPTION
       The function ASN1_TIME_set() sets the ASN1_TIME structure s to the time
       represented by the time_t value t. If s is NULL a new ASN1_TIME
       structure is allocated and returned.

       ASN1_TIME_adj() sets the ASN1_TIME structure s to the time represented
       by the time offset_day and offset_sec after the time_t value t.	The
       values of offset_day or offset_sec can be negative to set a time before
       t. The offset_sec value can also exceed the number of seconds in a day.
       If s is NULL a new ASN1_TIME structure is allocated and returned.

       ASN1_TIME_set_string() sets ASN1_TIME structure s to the time
       represented by string str which must be in appropriate ASN.1 time
       format (for example YYMMDDHHMMSSZ or YYYYMMDDHHMMSSZ).

       ASN1_TIME_check() checks the syntax of ASN1_TIME structure s.

       ASN1_TIME_print() prints out the time s to BIO b in human readable
       format. It will be of the format MMM DD HH:MM:SS YYYY [GMT], for
       example "Feb  3 00:55:52 2015 GMT" it does not include a newline. If
       the time structure has invalid format it prints out "Bad time value"
       and returns an error.

       ASN1_TIME_diff() sets *pday and *psec to the time difference between
       from and to. If to represents a time later than from then one or both
       (depending on the time difference) of *pday and *psec will be positive.
       If to represents a time earlier than from then one or both of *pday and
       *psec will be negative. If to and from represent the same time then
       *pday and *psec will both be zero.  If both *pday and *psec are non-
       zero they will always have the same sign. The value of *psec will
       always be less than the number of seconds in a day. If from or to is
       NULL the current time is used.

NOTES
       The ASN1_TIME structure corresponds to the ASN.1 structure Time defined
       in RFC5280 et al. The time setting functions obey the rules outlined in
       RFC5280: if the date can be represented by UTCTime it is used, else
       GeneralizedTime is used.

       The ASN1_TIME structure is represented as an ASN1_STRING internally and
       can be freed up using ASN1_STRING_free().

       The ASN1_TIME structure can represent years from 0000 to 9999 but no
       attempt is made to correct ancient calendar changes (for example from
       Julian to Gregorian calendars).

       Some applications add offset times directly to a time_t value and pass
       the results to ASN1_TIME_set() (or equivalent). This can cause problems
       as the time_t value can overflow on some systems resulting in
       unexpected results.  New applications should use ASN1_TIME_adj()
       instead and pass the offset value in the offset_sec and offset_day
       parameters instead of directly manipulating a time_t value.

BUGS
       ASN1_TIME_print() currently does not print out the time zone: it either
       prints out "GMT" or nothing. But all certificates complying with
       RFC5280 et al use GMT anyway.

EXAMPLES
       Set a time structure to one hour after the current time and print it
       out:

	#include <time.h>
	#include <openssl/asn1.h>
	ASN1_TIME *tm;
	time_t t;
	BIO *b;
	t = time(NULL);
	tm = ASN1_TIME_adj(NULL, t, 0, 60 * 60);
	b = BIO_new_fp(stdout, BIO_NOCLOSE);
	ASN1_TIME_print(b, tm);
	ASN1_STRING_free(tm);
	BIO_free(b);

       Determine if one time is later or sooner than the current time:

	int day, sec;

	if (!ASN1_TIME_diff(&day, &sec, NULL, to))
	       /* Invalid time format */

	if (day > 0 || sec > 0)
	  printf("Later\n");
	else if (day < 0 || sec < 0)
	  printf("Sooner\n");
	else
	  printf("Same\n");

RETURN VALUES
       ASN1_TIME_set() and ASN1_TIME_adj() return a pointer to an ASN1_TIME
       structure or NULL if an error occurred.

       ASN1_TIME_set_string() returns 1 if the time value is successfully set
       and 0 otherwise.

       ASN1_TIME_check() returns 1 if the structure is syntactically correct
       and 0 otherwise.

       ASN1_TIME_print() returns 1 if the time is successfully printed out and
       0 if an error occurred (I/O error or invalid time format).

       ASN1_TIME_diff() returns 1 for sucess and 0 for failure. It can fail if
       the pass ASN1_TIME structure has invalid syntax for example.

1.0.2f				  2016-01-28		      ASN1_TIME_set(3)
[top]

List of man pages available for DragonFly

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net